Transcript
New_CEM_Covers 3:Layout 1 06/03/2012 10:18 Page 1
CEM AC2000 UK Product Catalogue
A Tyco International Company
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:27 Page 1
Advanced Access Solutions CEM currently secures sites in over 40 countries around the world. CEM supports customers in a wide range of sectors including Aviation, Healthcare, Education, Petrochemical and Retail.
CEM Customers… Petrochemical
Healthcare
CEM’s AC2000 SE (Standard Edition) System is perfect for petrochemical sites where security is paramount. The CEM AC2000 SE access control system offers refineries 24 hour security through the use of intelligent card readers and a stable security infrastructure. AC2000 SE restricts entry to refineries as well as monitoring the movement of authorised visitors, employees and contractors. AC2000 SE also offers portable access control in unpredictable petrochemical environments where a mains power supply is not always available.
CEM’s PoE+ (Power over Ethernet Plus) access control solution offers its healthcare clients an easy to install solution which minimises disruption to the facility and reduces commissioning costs. • Stobhill & Victoria Hospitals, UK • Midlothian Hospital, UK • King Khalid University Hospital, Saudi Arabia • Baylor Medical Centre at Uptown, USA
• Lindsey Oil Refinery, UK • Gasco Ruwais, UAE • Jurong Island, Singapore
06/12
CEM Catalogue
Chapter 1 Page 1
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:27 Page 2
CEM Solutions… Education CEM solutions are installed in educational facilities around the world, securing students, teachers, equipment and premises. The AC2000 system controls and monitors various buildings so that only those with correct authorisation are permitted access to education buildings, rooms and other restricted areas across campuses. • Liverpool John Moores University, UK • Latymer School, UK • Primary schools around the world
Financials With high security a requirement for major financial institutions, many have chosen a CEM solution to protect staff and customers and secure areas where security is of the utmost importance. • Barclays Bank, UK • KPMG, UK & India • Ulster Bank, UK
Other Sectors CEM solutions are suitable for other facilities including ports, retail sites, casinos and corporate premises. • Marina Bay Sands Casino, Singapore • Shaw Studio’s Movie City, Hong Kong • Port of Cork, Ireland
For CEM Customer Project Profiles, please visit www. cemsys.com/casestudies
Chapter 1 Page 2
CEM Catalogue
06/12
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:27 Page 3
CEM Solutions… CEM has a solution for all sizes. The proven CEM AC2000 product range offers reliable security management for small through to large, multi-site applications. Where does AC2000 fit in the Security Market?
Niche Market
Mass Market
About AC2000 At the heart of the AC2000 system is the Central Database Computer (CDC Server), which is based on a client-server system architecture design. The AC2000 CDC running on a Linux operating system, provides a highly sophisticated level of power and system resilience. AC2000 not only utilizes CEM’s advanced range of hardware products including intelligent card readers and Ethernet-ready controllers, but also offers compatibility with read heads from third party manufacturers. The use of distributed intelligence at all levels of the system including the use of card readers with their own database adds to the overall resilience.
06/12
CEM Catalogue
Chapter 1 Page 3
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:27 Page 4
AC2000 Lite Edition
Integrated security management system for small to medium sites
Features •VIPPS ID Badging •Visitors Management •Vehicle Management •Zone Monitor •Alarm Event Display (AED) •Rolling Transaction Display •Time & Attendance •Advanced Reporting •Integrated Biometrics •User Definable Fields •Video Integration And more!
Ideal for small to medium sized solutions, AC2000 Lite offers a low cost, integrated access control, alarm processing and photo badging security management system for up to 128 doors. Encompassing the core software features of the AC2000 SE system and with a comprehensive suite of software applications on one CD, AC2000 Lite sets the benchmark in the industry as one of the most accomplished security management solutions available for small to midrange markets.
AC2000 Lite Controller The central component of the AC2000 Lite security management system is the AC2000 Lite System Controller. The system controller is an intelligent, networked device that holds the AC2000 Lite database and controls up to 128 doors. Any client workstation on the network can access the system controller to manage the database, monitor alarm activity or configure devices. As a quick and convenient method of installation, installers simply use a web based configuration tool to perform the basic set-up and configuration of the AC2000 Lite Controller, as well as perform diagnostic checks and system backups. Once the basic configuration has been completed, administrators can then operate and fully maintain the AC2000 Lite system via a networked Windows® based operator workstation, with AC2000 Lite software installed.
Chapter 1 Page 4
CEM Catalogue
06/12
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:27 Page 5
AC2000 Lite Edition AC2000 Lite System Topology AC2000 Lite Workstation
Operational Applications
Photo Badging
DVR System Integration Intruder System Integration
TCP/IP
Ethernet Switch
Ethernet/Serial Converter
TCP/IP
TCP/IP
RS485
TCP/IP
S610f Ethernet finger card reader/controller
1.2KM Max Distance
8 Inputs DCM Door Controllers
4 Inputs
AC2000 Lite System Controller
S3020 Portable reader family
sDCM 300 two Door Controller
S610e Card reader/controller
EtherProx Card reader/controller
AC2000 Lite Door Controller Options
06/12
CEM Catalogue
eDCM 300 Input/Output Controller AC2000 Lite I/O Controller
Up to 16 Devices
InfoProx Card Reader Controller
Serial Device Support
Chapter 1 Page 5
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:27 Page 6
AC2000 Standard Edition
Powerful and fully integrated security management system
Features • • • • • • • • • • • • • • • • • • •
Ideal for medium to large scale solutions, AC2000 SE can act as the central SMS (security management system), offering powerful access control, alarm processing, photo badging and integration with third party systems. Known throughout the industry as a proven product that meets the highest of security requirements, the AC2000 SE system has been installed successfully at some of the largest facilities around the world.
Chapter 1 Page 6
VIPPS ID Badging Vehicle Management Visitor Management Alarm Event Display (AED) Guard Tours Rolling Transaction Display Zone Monitor Extended Reports Time & Attendance Unlimited User definable Fields Configure reader messages Muster Zones Standard System Link American Dynamics Intellex range IndigoVision Video interface Bosch /Synectics Video interface Third party API (Application Programming Interface) Fully Integrated Biometrics Lift Control And more!
The AC2000 SE Server, running on the Linux operating system, provides a highly sophisticated level of power and system resilience, whilst Windows® based operator workstations present the user with a familiar, easy to use front-end interface. AC2000 SE supports CEM’s range of industry leading Serial and Ethernet hardware products.
CEM Catalogue
06/12
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:27 Page 7
Standard Edition AC2000 SE System Topology
System Link to remote AC2000 CDC Sever
AC2000 Main System (CDC)
Camera
Backup Access Server (Failover CDC)
AC2000 Work Stations
VIPPS enrolment Workstation
DVMS Integration ID Card Printer
AC2000 Alarm and Event Management
WAN
DVMS
S9032/S9064 Controller supporting 32 or 64 serial readers
TCP/IP
TCP/IP
TCP/IP
(TCP/IP)
Wireless access point
AC2000 Main System (CDC)
Validation Reader
RTC Controller supporting upto 256 Ethernet Readers
Ethernet Switch TCP/IP
R485
TCP/IP TCP/IP
R485
RS485
S610s serial card sDCM Reader Controller 300 two Door Controller
06/12
Infoprox Serial card Reader Controller
S3020 Portable reader family
S610e Card EtherProx Ethernet S610f Ethernet Card finger card read- reader/controller reader/controller er/controller
CEM Catalogue
eDCM 300 Intelligent Two Door Controller
Chapter 1 Page 7
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:27 Page 8
AC2000 System Comparison Criteria - Size AC2000 Lite 10,000 128 5
Number of Cardholders Number of Doors supported Number of Workstations supported
AC2000 SE Unlimited Unlimited 172*
Criteria – Software & Functionality Standard Software Options AC2000 Lite comes with a range of software options on one CD as standard. Some AC2000 SE software options are charged on an application licence basis - see price list for further details Code SWAED SWVIPPS SWTANDA SWVISIT Integration SWSSL SWDVR-AD SWHDVR-AD SWNVR-IV SWNVR-SY SWINT-GAL SWINT-DSC SWXML SWAPI SWOPCDA SWBACNET SWDKEY SWPDS-FFT SWFAIL Other Functions Lift Control Database
Description AED (Alarm Event Display) Graphical Maps Utility VIPPS - Photo ID software Time and Attendance Reporting Visitor Management Standard System Link (requires v5.4 or greater) DVR Interface (American Dynamics Intellex® range) American Dynamics HDVR Interface IndigoVision NVR (Network Video Recorder) Interface Synectics Video Interface (v6.1 upwards) SIA Intruder System Interface (Galaxy) SIA Intruder System Interface (DSC) XML Interface Application Programming Interface (API) OPC DA Interface BACNET Interface Deister Keysafe Interface (v6.1 upwards) FFT CAMS Perimeter Detection System (v6.2upwards) Failover Server software licence
AC2000 Lite
AC2000 SE
P P P P
P P P P
P P P P
P P P P P P P P P P P P P P P P
Partitioning
* Per Single Server
AC2000 Interfaces are continually being developed. For more information email
[email protected]
Chapter 1 Page 8
CEM Catalogue
06/12
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:27 Page 9
AC2000 Standard Software Modules AC2000 Zone Monitor Zone Monitoring application offers the ability for operators to monitor the occupancy levels of a pre-defined area of the site. A running total or count will always be visible and updated in real time as cardholders enter or exit the site.
A real time running total of cardholders in a defined area aiding customers health & safety policy.
Features • Security can visually verify cardholders & associated events in real-time
AC2000 Rolling Transaction Display (RTD) Rolling Transaction Display is designed to offer security a real-time personnel & event monitoring tool. It allows staff to visually identify cardholders prior to their gaining access through a secure door.
Features • Vehicle passes can be reused on other vehicles providing cost effective use of cards/tags
See Integrations section for list of CEM compatible integrations.
AC2000 Vehicle Management AC2000 Vehicles allows users to produce a professional pass or vehicle tag for all vehicles, with the ability to associate cardholders to vehicle records. The application stores details of vehicles on the AC2000 system such as Vehicle Make, Model and Registration number. AC2000 Vehicles also features Vehicle Anti-Passback, customised user definable fields and the automatic disabling of vehicle passes/tags.
06/12
CEM Catalogue
Chapter 1 Page 9
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:27 Page 10
AC2000 Enhanced Software Modules Features • Report Scheduler – Reports can be frequently run & exported for management purposes
AC2000 Extended Reports The reporting capability of AC2000 is extremely powerful. AC2000 Extended Reports allows all AC2000 transactional history to be automatically stored for future reporting. Reports can be generated to run on Alarms, Personnel, Devices e.t.c, as well as scheduled in advance for regular review.
Chapter 1 Page 10
CEM Catalogue
06/12
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:27 Page 11
AC2000 Enhanced Software Modules Features • Sophisticated ID badging for staff, contractors, visitors etc • Passes can be individually designed and customised to suit customer tastes
AC2000 has a comprehensive set of software applications that enhance site operations. Windows® based operator workstations present the user with a familiar, easy to use front-end.
Key Applications ID Badging AC2000 VIPPS (Visual Imaging & Pass Production System) The AC2000 VIPPS application gives the operator a range of video imaging facilities for capturing personnel details, including images, company logos and personnel signatures and incorporating these onto professionally designed ID passes. AC2000 VIPPS also supports fingerprint enrolment via the S610f Fingerprint validation reader meaning that a biometric data capture can take place at the same time as other data capture.
Product Codes SYS/004/007
SWVIPPS
06/12
CEM Catalogue
AC2000 SE Workstation VIPPS workstation with VIPPS Software (VIPP2) and video capture card installed VIPPS - Photo ID software (UK Only)
Chapter 1 Page 11
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:27 Page 12
AC2000 Enhanced Software Modules Features • Enables technology cards to be issued to visitors and then returned for future use; saving on visitor card costs
AC2000 Visitors The AC2000 Visitors application provides a powerful tool to monitor and control access for temporary visitor cardholders. Visitors can be given access levels and/or traced; allowing visitor movements to be monitored and controlled.
AC2000 Visitors is available with AC2000 Lite and AC2000 SE version 5.0.2 and upwards.
Product Code SWVISIT
Visitor Management
AC2000 Time and Attendance AC2000 Time and Attendance module is a reporting tool that offers administrators statistics on the ‘in and out’ movements of staff. The module automates time consuming administrative tasks and provides accurate employee attendance data that can be used with many third party products such as a dedicated payroll system for accounting purposes.
Product Code SWTANDA
Time & Attendance Reporting
Features • One user friendly and central command and control interface for access control and video surveillance
See Integrations section for list of CEM compatible integrations.
Integrated Alarm Monitoring AC2000 AED (Alarm & Event Display) AC2000 AED is the integrated alarm processing software and acts as customer’s central Security Management System (SMS), providing one graphical user interface for the integration of third party video systems.
AED provides dynamic and real-time graphical, audio and text-based information on all alarms and events that occur on the AC2000 system. AED provides users with a wealth of useful alarms processing features including dynamic icons representing device status, automatic zoom and advanced navigational tools.
Product Codes SYS/004/006
SWAED
Chapter 1 Page 12
CEM Catalogue
AC2000 SE Workstation AED (with Maps Utility) – workstation with AED Software (SWAED) installed & 19" Monitor AED (Alarm Event Display) Graphical Maps Utility (UK Only) 06/12
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:27 Page 13
AC2000 Enhanced Software Modules Features • Seamless integration of AC2000 SE (Standard Edition) software with the Tyco Minerva MX Range of Fire Panels • Activated alarms shown instantly within AC2000 AED (Alarm & Event Display) module – Minerva panels sensors/icons placed on AED Maps • Fire alarms reported instantly on AC2000 AED application for central monitoring • Convenient and easy to integrate with existing AC2000 installations • Support for MX Speak protocol version 3.x, 4.x and 5.0/5.1 via external MX BACnet Converter • Graphical representation of current states for MX Components: Points, Zones and Panels. • MX Component state changes displayed as Alarms and Events
AC2000 Minerva MX Fire Interface AC2000 Minerva MX Fire Interface: This highly cost-effective interface allows seamless integration of the AC2000 SE system with the Tyco Minerva MX Fire Detection System. AC2000 will act as the central Security Management System (SMS) by enabling fire alarms for MX Panels, Sensors and Zones within the central AC2000 Alarm and Event Display (AED) application.
Fire Interface AC2000 Minerva MX Interface enables uni-directional communication allowing the AC2000 system to receive fire alarms from the Minerva MX Range Fire Detection System - consisting of a network of up to 99 Fire Panels. Data Transmission Protocol Minerva MX range Fire Panel transmits data in MX-Speak protocol which is translated by MX BACnet Converter and passed on in BACnet protocol via TCP/IP network to the AC2000 CDC server. The server processes the alarm and passes it on to the AC2000 Workstation for the alarm to be displayed on the central AC2000 AED Application.
Product Code SWFIRE-MX
AC2000 Central Database
AC2000 Minerva MX Fire Interface
AC2000 Alarm & Event Display (AED Workstation)
Minvera MZX Fire Detection System
Fire Alarm Equipment
MX BACnet Converter
Fig.1 General functional diagram showing key elements of the Fire Notification process.
06/12
CEM Catalogue
Chapter 1 Page 13
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:27 Page 14
AC2000 Enhanced Software Modules
AC2000 AED (Alarm Event Display) application
Central Monitoring AC2000 Minerva MX interface is seamlessly integrated into the existing AC2000 Alarm and Event Display (AED) application. AED provides users with a central dynamic view / representation of all system events. MX components and their corresponding alarms can be centrally managed via the one AED software platform. Fire icons can be placed onto the AED graphical maps alongside access control readers and camera locations. Alarms are received, processed and reported on the AC2000 AED application for central management. Ease of use AC2000 Minerva MX interface does not require any complex back-end configuration. All required parameters are configured automatically using the provided tools at the commissioning stage. The configuration of MX Components within AC2000 System is done in a standard manner using the AC2000 Alarm and Event Display (AED) application.
Chapter 1 Page 14
CEM Catalogue
06/12
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:27 Page 15
AC2000 Enhanced Software Modules Features • Seamless integration with American Dynamics Victor Unified video solution • Associate access control alarms with live video footage • Uses AC2000 External Systems Interface to forward alarms to Victor, including alarms generated by 3rd party AC2000 interfaced systems such as Intruder Panels • Victor can be configured to play a video salvo, perform a video tour, and live camera popup footage upon an AC2000 access control alarm • The CEM AC2000 victor interface allows Victor users to remotely open/close AC2000 controlled doors • Victor can generate reports on AC2000 devices • Available for use with AC2000 SE (Standard Edition)
AC2000 victor video Interface AC2000 victor video Interface: AC2000 interface to American Dynamics victor unified video solution allows CEM AC2000 alarms to be sent to the victor unified platform to be associated with video action. This bi-directional interface also allows a certain level of control such as remote door Lock/Unlock and Oneshot for AC2000 devices from within the victor unified client.
AC2000 alarms can trigger actions such as live camera popup, video salvos, and video tours within the victor Client. This allows AC2000 alarms to be associated with video footage on the victor system. AC2000 victor interface allows victor client users to remotely execute Access Control commands such as Open/Close AC2000controlled doors. The victor client can also generate reports for AC2000 devices
Two-way (Bi-directional) Integration AC2000 supports a two way interface to the victor Unified Client. victor can receive alarms from AC2000 and also control AC2000 devices from within the victor Client, supporting access control features such as remote door Lock/Unlock and Oneshot -‘remote door open’. The AC2000 victor interface allows access control alarms to be sent to the American Dynamics victor Unified Client where they can be associated with video actions.
Product Code SWVUVS-AD
06/12
CEM Catalogue
AC2000 victor Interface
Chapter 1 Page 15
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:27 Page 16
AC2000 Enhanced Software Modules Features • Multiple AC2000 Systems connected together • Associate Cardholder details shared across multiple sites – eradicating the need for travelling personnel to have extra cards or to re enrol per site • Live central database sharing but with continued independent access control at each site • Support for unlimited sites within the link • Card details can be auto exported to global server • Display optional system wide alarm and transaction monitoring and reporting • ‘Global Transaction Report’ & ‘Global Alarm Report’ • Available with AC2000SE & AC2000 Lite
AC2000 Standard System Link Multi-Site AC2000 Server Link The AC2000 Standard System Link application offers the ability to link multiple standalone CEM AC2000 SE and AC2000 Lite systems together. Designed for companies with multiple sites spread across geographical areas, Standard System Link allows security and IT managers to globally share card holder details/records. With Standard System Link, card holders that are required to travel between different sites typically do not need to be issued with a second card or be enrolled on the remote site(s) system. The AC2000 Standard System Link software removes administrative duplication, allowing for seamless multi-site access control. Corporate security managers have central control over the integrated AC2000 systems, whilst allowing regional offices to independently maintain/control the local server databases. Standard System Link also offers the option to centrally collate all cardholder records, alarms and transactions from all linked sites via a Standard System Link Global Server. This allows for the central monitoring and reporting of global text based alarms and transactions.
With the ability to add unlimited sites within the link, the AC2000 Standard System Link application allows for seamless cardholder use over a globally installed access control system.
Global sharing of cardholder data / Central database storage ID card enrolment can take place at any AC2000 SE or Lite Controller, with the ability to export cardholder details to any other linked system servers/controllers. Sharing data among systems allows travelling staff to gain access to other sites without having to re-enrol or be issued with another ID card; saving duplication, administration time and saving global card costs. Data can be automatically exported and synchronised among sites approximately every 30 minutes (excluding fingerprint templates, photographs and signatures). Global alarm & transaction reporting Standard System Link also offers the option to globally report on all the alarms and transactions that have occurred on linked sites via the Global Server if required. A replica of all site cardholders, transactions and alarms can be automatically sent to a nominated master database for global reporting and auditing purposes. Unlimited sites can be linked Such is the capability of the Standard System Link application that an unlimited amount of sites can be seamlessly linked together. This offers customers the benefit of a cost effective scalable linked system without future expansion restrictions. Another benefit of Standard System Link is that the module can be implemented at any time. Customers can install separate AC2000 systems initially and then globally link when the timing or strategy is appropriate.
Link multi site offices but maintain local AC2000 database independence Although all sites are linked, each local AC2000 server operates as a completely independent system, and maintains its own separate database. Local facility managers have responsibility for local site access control, whilst corporate security managers have access to global cardholder and text based alarm details via the Global Server.
Chapter 1 Page 16
CEM Catalogue
06/12
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:27 Page 17
AC2000 Enhanced Software Modules
Local AC2000 Workstation Site 1
Local AC2000 Workstation Site 2
Local AC2000 Workstation Site 3
Cardholder Details
Cardholder Details
Cardholder Details
Site 2 Cardholder Details Site 3 AC2000 AC2000 Server/Lite Controller Server/Lite Controller
Cardholder Details + Alarms
(Operational) Global Alarm Workstation
Cardholder Details + Alarms
(Operational) Global Alarm Server
Global Alarms
06/12
CEM Catalogue
Chapter 1 Page 17
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:27 Page 18
AC2000 Enhanced Software Modules Features • Seamless integration with American Dynamics ADTVR • Associate access control alarms with digital video footage • Live video feed activated directly from AC2000 AED (Alarm and Event Display) application • Live video pop-up based on alarm priority or time • Receive alarms from the ADTVR system • Camera icons can be positioned in AED module alongside access control readers • Display up to 16 individual camera feeds simultaneously in a single screen virtual matrix • Adjust camera pan, tilt, and zoom via integral software control • Export video snapshots and clips from AC2000 software
AC2000 ADTVR Interface The AC2000 video interface for American Dynamics Embedded ADTVR provides the ability to associate access control alarms with digital video clips and to view live camera footage. This enables AC2000 to act as the central Security Management System (SMS). The AC2000 ‘Video Configuration’ module seamlessly integrates AC2000 with the ADTVR, giving the operator a range of video imaging facilities to generate alarm reports with recorded video playback. The interface also allows system operators to view live video feed, configure live video popup on alarm and control camera positioning and presets.
from the start of the footage. Standard video controls are available on the DVR Viewer to Play, Pause, and Fast Forward/Rewind. This footage can then be exported to a file if required or a simple snapshot picture can be saved. Additionally system operators can view archived video footage by running alarms reports in the AC2000 Extended Reports application. Recorded Video Search and Retrieve The DVR Viewer also allows the user to search for alarms with video footage using various criteria which can then be replayed by clicking on the requested alarm detail.
The high level two-way interface allows a user to fully integrate the power of an American Dynamics ADTVR video system into the central AC2000 AED (Alarm and Event Display) application. AC2000 AED module enables all alarms, events and associated camera footage to be displayed centrally on the AC2000 system, including the ability to receive alarms from the TVR such as video motion and video loss.
Camera control A camera control facility is available for moveable cameras such as dome-based devices. The following controls are available :
ADTVR Embedded Video Recorders The ADTVR is an embedded DVR, making it very reliable and competitively priced. ADTVR offers the latest features such as high quality recording, long storage times, remote access and alarm reporting.
Requirements AC2000 SE v6.4 software & upwards AC2000 Lite v6.4 software & upwards
Zoom In and Out Camera Preset Selection Pan + Tilt Control
Alarms with associated video If an alarm event contains associated video footage, the operator can access the footage within the AC2000 AED (Alarm Event Display) application which will activate a DVR Viewer. Once the DVR Viewer has launched, the actual video footage is then uploaded from the ADTVR system. The viewer window will automatically display the video playback
Chapter 1 Page 18
CEM Catalogue
06/12
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:28 Page 19
AC2000 Enhanced Software Modules
Product Code SWADTVR-AD
06/12
CEM Catalogue
AC2000 American Dynamics ADTVR Interface
Chapter 1 Page 19
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:28 Page 20
CEM Hardware Multiple Site Application Features • Seamless cardholder use over a globally installed access control system • Report globally on Transactions and Alarms across sites
AC2000 Standard System Link AC2000 Standard System Link offers the ability to link multisite CEM AC2000 systems together. Designed for companies with multiple sites spread across geographical areas, Standard System Link allows security & IT managers to globally share card holder details/records. This removes this administrative duplication, allowing for seamless multi-site access control.
Product Code SWSSL Validation Reader to enter new card onto the system
Local Card Environment Workstation
Standard System Link Local Card Environment Workstation
Cardholder Details Site 2 CDC Server
Site 3 CDC Server Cardholder Details
Validation Reader to enter new card onto the system Site 1 CDC Server
Cardholder Details
Cardholder Details Transaction Alarms
Cardholder Details Transaction Alarms
Local Transactions and Alarms
Local AED Workstation Optional Global Master AED Workstation
Chapter 1 Page 20
Optional Global Master CDC Server
CEM Catalogue
06/12
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:28 Page 21
Integration- AC2000 as a Security Management System Integration The AC2000 system is available with interfaces to a range of third party security systems. CEM has a dedicated integration team which enables the development of interfaces on request. Acting as the central security management system, the AC2000 system architecture also supports high levels of integration, offering customers one central command and control centre for access control, video, intrusion, perimeter detection etc.
Backup Access Server (Failover CDC)
AC2000 Main Server point
AC2000 Main Server point
AC2000 Main Server point
AC2000 Workstation(s)
AC2000 Main Server point
AC2000 Main Server point
AC2000 Main Server point
S610f Ethernet Fingerprint card reader/controller S3020 Portable Reader
TCP/IP
TCP/IP
Wireless Access point
TCP/IP
TCP/IP
AC2000 Main Server point
eDCM300 Intelligent Two Door Controller
CCTV Integration
Building Management System Integration
HVAC Panel
Fire Alarm Panel
Keypad Control
Fire System Server
BMS Workstation
CCTV Workstation
BMS Server
DVMS
NVR Server
Intrusion Keypad Perimeter Controller
Fire System workstation
Perimeter Server
Perimeter & Boundary Defence Integration
Intrusion Alarm Panel
Intrusion Detection Integration
Fire Integration
Features • Allows simple integration to third party systems without customisation or development
AC2000 External Systems The AC2000 External Systems application allows AC2000 to export access control information to third party systems. It allows the user to specify the format of alarm strings that are to be sent to the external system.
06/12
CEM Catalogue
Chapter 1 Page 21
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:28 Page 22
AC2000 Integration - Video Interfaces Features • Fully integrated and seamless access control and video solution with American Dynamics DVMS Intellex
AC2000 DVR Interface - American Dynamics Intellex® DVMS AC2000 interfaces with American Dynamics Intellex® video management solution, providing the ability to associate access control alarms with digital video clips. Using the central AC2000 AED application, a DVR Viewer gives the operator a range of video imaging facilities to generate alarm reports with associated live video footage,as well as control camera positioning.
AC2000 DVR Interface Requirements: • AC2000 version 5.0 and upwards • American Dynamics DVR (Intellex Ultra Range, Classic Range, LT Range or IP Range)
Product Code SWDVR-AD
DVR Interface (American Dynamics Intellex® range)
Features • Seamless integration with American Dynamics HDVR • Associate access control alarms with digital video footage
AC2000 HDVR Interface - American Dynamics Hybrid Video Recorders The AC2000 video interface for American Dynamics Hybrid-DVR (HDVR) provides the ability to associate access control alarms with digital video clips and to view live camera footage. This enables AC2000 to act as the central Security Management System (SMS).
AC2000 HDVR Interface Requirements: • AC2000 v6.2 software & upwards • American Dynamics HDVR
Product Code SWHDVR-AD
Chapter 1 Page 22
CEM Catalogue
American Dynamics HDVR Interface)
06/12
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:28 Page 23
AC2000 Integration - Video Interfaces Features • Centrally manage IndigoVision alarms via AC2000
AC2000 Video Interface - IndigoVision NVR AC2000 provides the ability to associate access control alarms with IndigoVision digital video. The IndigoVision interface seamlessly integrates to live and recorded video footage on the IndigoVision Control Centre. The operator is provided with a range of video imaging facilities to generate alarm reports with associated video, while simultaneously viewing live video feed. Utilising two way communications,
AC2000 can send and receive both access control and video alarms, allowing for a complete security and video management system. AC2000 Video Interface Requirements: • AC2000 SE v6.1 software & upwards • AC2000 IndigoVision Interface Alarm Server • IndigoVision Alarm Server
Product Code SWNVR-IV
IndigoVision NVR (Network Video Recorder) Interface
Features • Centrally manage BOSCH alarms via AC2000 • Associate live video feed directly from AC2000 AED application
AC2000 Video Interface - Bosch The AC2000 video interface for BOSCH provides the ability to associate access control alarms with BOSCH CCTV and video clips.
If an alarm event contains associated video footage, the operator can access the footage within the AC2000 AED (Alarm Event Display) which will enable a DVR viewer.
Product Code SWNVR-BO
Bosch NVR (Network Video Recorder) Interface (v6.1 upwards)
Features • Seamless integration with Synectics Video products
AC2000 Video Interface - Synectics The AC2000 video interface for Synectics provides the ability to associate access control alarms with Synectics digital video footage. This enables AC2000 to act as the central Security Management System (SMS) and provides a fully integrated bidirectional interface.
Product Code SWNVR-SY
06/12
CEM Catalogue
Synectics Video Interface (v6.1 upwards)
Chapter 1 Page 23
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:28 Page 24
Integration - Non Video Interfaces Features • Eradicates the need to design and develope custom interfaces
AC2000 Application Programming Interface (API) AC2000 Application Programming Interface (API) provides a standardised and convenient way for developers to interface an external system into the AC2000 SE (Standard Edition) system.
Product Code SWAPI
Application Programming Interface
Features • Integrated solution for access control and securing keys and valuable equipment • Reduces duplication of records and administration time of two separate systems
AC2000 Deister Keysafe Interface The CEM Deister Keysafe Interface allows select personnel details from the AC2000 system to automatically populate the Deister‘ proxSafe’ system. AC2000 automatically exports a list of authorised keysafe access users, which is imported into the proxSafe server.
Product Code SWDKEY
AC2000 Deister Keysafe Interface (v6.1 upwards)
Features • Fully integrates Intruder detection system with the access control system. One seamless solution for ease of administration
AC2000 SIA Intruder Interface The AC2000 video interface for Synectics provides the ability to associate access control alarms with Synectics digital video footage. This enables AC2000 to act as the central Security Management System (SMS) and provides a fully integrated bidirectional interface.
AC2000 SIA Intruder Interface Requirements: • DSC - Maxsys Range with T-Link Ethernet Communicator (PC4020) Honeywell - Galaxy* with E080 Ethernet module • AC2000 v 5.7 upwards
Product Code SWINT-GAL Chapter 1 Page 24
CEM Catalogue
SIA Intruder System Interface (Galaxy) 06/12
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:28 Page 25
Hardware Features • Intelligent embedded network device for access control and alarm monitoring with the CEM AC2000 system • Supports up to 32 doors (64 readers IN/OUT) • Easy software upgrade to S9064 Controller supporting 64 doors • Battery backup available in case of power failure • 64 MB compact flash for database with expansion available • Storage capacity for up to 250,000 card records • TCP/IP based diagnostics/monitoring available via web browser or Telnet • Database is retained even in the event of battery backup failure
S9032 Controller The S9032 Controller is an intelligent networked device, for door entry/exit control and alarm monitoring. Part of the new generation of S9000 Controllers, the S9032 is a central component of the fully expandable AC2000 integrated security management system. The S9032 Controller provides full 10/100 Base-T Ethernet connectivity, allowing users to remotely perform database administration and monitor alarms. The administrator can use both Telnet and web-based user interfaces to remotely monitor the controller status at any time. In the event of communications failure with the host server, card transactions and alarms are stored in memory, and will be uploaded to the host when communications are restored. The S9032 Controller supports two multidrop networks of card readers with up to 16 master readers off each port (32 total).
The readers communicate with the controller using RS485 serial communications. Each master reader can additionally support a push-button, or Exit reader for egress. The S9032 can be easily upgraded to a S9064 Controller offering two additional multidrop networks of card readers from the same controller. This provides scope for the controller to support up to 64 doors (128 readers IN/OUT). The upgrade can be performed on site within minutes by entering a valid license code resulting in minimal disruption to the system operation.
Technical Specification Physical Size Weight Housing Colour Power - Voltage
- Current Consumption - Backup Battery
Environmental - Temperature - Humidity LED Indicators
Functionality Inputs Reader capacity
Memory
06/12
42 x 483 x 233mm 2.6Kg 19” rackmounted steel enclosure Beige
Database - Cardholders
Storage of up to 250,000 cards per controller, with four access levels and time zone definition pairs per cardholder record. Up to 250,000 transactions in offline operation, depending on amount of cardholders stored. Custom-made Web Browser GUI available for displaying controller status and configuration as well as alarm and transaction displaying. A Telnet client can also be used for remote diagnostics.
- Transactions Mains power adapter 100-240Vac (supplied). Output voltage 12Vdc @ 2.0A 300mA Internal Lithium Ion battery giving a minimum of three hours backup time. Power fail reported to system internally. -10o to 50oC 95% non condensing Online/Offline, Ethernet connection, Activity/Status, Power and Heartbeat Dedicated Tamper Input Dedicated Power Fail Input Two Optically isolated RS485 multidropped reader networks, each supporting up to 16 doors (32 readers IN/OUT per port) 10MB of RAM 28kB Boot Loader ROM 32MB Compact Flash Disk
Configuration
Commincation Interface To Card Reader RS485 multidrop cable runs using copper wire with maximum length of 1.2km without repeater RJ45 - Connection To System Host Ethernet 10/100 BaseT - Connection RJ45
Product Code DAC/390/032
CEM Catalogue
S9032 Controller
Chapter 1 Page 25
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:28 Page 26
Hardware Features • Intelligent embedded network device for access control and alarm monitoring with the CEM AC2000 system • Supports up to 64 doors (128 readers IN/OUT) • Battery backup available in case of power failure • 64 MB compact flash for database with expansion available • Storage capacity for up to 250,000 card records • TCP/IP based diagnostics/monitoring available via web browser or Telnet • Database is retained even in the event of battery backup failure
S9064 Controller The S9064 Controller is an intelligent networked device, for door entry/exit control and alarm monitoring. Part of the new generation of S9000 Controllers, the S9064 is a central component of the fully expandable AC2000 integrated security management system.
The S9064 Controller supports four multidrop networks of card readers with up to 16 master readers off each port (64 total). The readers communicate with the controller using RS485 serial communications. Each master reader can additionally support a push-button, or Exit reader for egress control.
The S9064 Controller provides full 10/100 Base-T Ethernet connectivity, allowing users to remotely perform database administration and monitor alarms. The administrator can use both Telnet and web-based user interfaces to remotely monitor the controller status at any time. In the event of communications failure with the host server, card transactions and alarms are stored in memory, and will be uploaded to the host when communications are restored.
Technical Specification Physical Size Weight Housing Colour Power - Voltage Output voltage - Current - Backup
Environmental - Temperature - Humidity LED Indicators
Functionality Inputs Reader capacity
Memory
Chapter 1 Page 26
42 x 483 x 233mm 2.6Kg 19” rackmounted steel enclosure Beige
Database - Cardholders
Storage of up to 250,000 cards per controller, with four access levels and time zone definition pairs per cardholder record. Up to 250,000 transactions in offline operation, depending on amount of cardholders stored. Custom-made Web Browser GUI available for displaying controller status and configuration as well as alarm and transaction displaying. A Telnet client can also be used for remote diagnostics.
- Transactions Mains power adapter 100-240Vac (supplied) 12Vdc @ 2.0A Consumption 300mA Battery Internal Lithium Ion battery giving a minimum of three hours backup time. Power fail reported to system internally. -10o to 50oC 95% non condensing Online/Offline, Ethernet connection, Activity/Status, Power and Heartbeat Dedicated Tamper Input Dedicated Power Fail Input Four Optically isolated RS485 multidropped reader networks, each supporting up to 16 doors (32 readers IN/OUT per port) 10MB of RAM 28kB Boot Loader ROM 32MB Compact Flash Disk
Configuration
Commincation Interface To Card Reader RS485 multidrop cable runs using copper wire with maximum length of 1.2km without repeater RJ45 - Connection To System Host Ethernet 10/100 BaseT - Connection RJ45
Product Code DAC/390/064
CEM Catalogue
S9064 Controller
06/12
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:28 Page 27
Cards and Readers Which readers to use? CEM readers are the most advanced readers in the industry, featuring a Keypad for PIN security, an LCD display for reader messages and an internal database for offline operation at the secure door. Some customers may choose to install S610e readers at the building entry and exit, with S610f fingerprint readers then installed at high security areas in the building such as server rooms.
CEM Reader range
“CEM readers are the most advanced readers in the industry.”
S610f Fingerprint Reader For security critical areas such as server rooms.
DCM (Door Control Module) Intelligent two door controller To interface two ADT iCLASS readers to either AC2000 Lite or SE.
S610 Reader For external doors
06/12
S3020 Portable Reader range For roaming checks inside and outside the premises
CEM Catalogue
Chapter 1 Page 27
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:28 Page 28
Cards and Readers - Door Hardware Features • • • • • • • • • • •
Support for two doors On-board 10/100 Mbps Ethernet Communicates directly with the central system Structured database allows storage of large amounts of cardholder records for off-line card validation Reader communications via standard Wiegand or Mag Stripe interfaces Eight supervised inputs (four available per door) Two relays (normally opened or closed) and open collector outputs Self resetting fuses – saves maintenance time Onboard LED - provides visual status Dedicated tamper input Suitable for use with AC2000 family: AC2000 Lite AC2000 SE (Standard Edition) AC2000 AE (Airport Edition)
eDCM 300 Intelligent Two Door IP Controller The eDCM 300 (Door Control Module) is a low cost, two-door controller designed to interface third-party read heads with the CEM range of access control systems.
The eDCM 300 supports most third-party access control read heads conforming to the physical Wiegand/Mag Stripe (data/data, clock/data) interfaces, covering a range of technologies from RF Proximity to Biometric devices.
The eDCM 300 has an on-board 10/100 Ethernet connection and communicates directly with the AC2000 central system. Using a powerful 32bit processor, the eDCM 300 gives full off-line validation and decision making capability at the point of entry, when host communication is not available.
The eDCM 300 supports two door configurations. It can either be configured for two read heads on two separate doors, with optional Exit push buttons, or can be configured to support two reader heads (an Entry/Exit configuration) for bi-directional control on a single door.
Technical Specification Physical Size - Board Only - Enclosure Weight - Board Only - Enclosure Housing Colour Power Board Only: - Voltage - Current Consumption Enclosure: - Voltage - Current Consumption Backup Battery
Environmental - Temperature LED Indicators
192 x 145 x 20mm 460 x 250 x 90mm 0.1Kg 5.00kg Wall mount 1.2mm steel enclosure Grey
Functionality Inputs
9 – 14Vdc 170mA (excluding locks and heads)
Outputs
220-230 VAC 50/60Hz Reader capacity 200mA (excluding locks and heads) Integral charging circuit provided with enclosure and space battery (Battery not supplied) -10° to 55°C Power, Link to host, Comms Tx/Rx, Fault /Tamper, Lock and Relay Status
Configuration Database memory Cardholders Transactions RTC Battery Backup Configuration
* Door Position * Lock Status * Exit Push Button * General Purpose Power Fail Tamper Battery Low (reported internally) Dedicated Power Fail Input * = 4 state tamper protected inputs Two Relays rated at 30V@5A Two 12V open collector outputs limited to 1.5A (Door Lock and External Sounder) 2 Weigand/Mag Stripe interfaces (data/data, clock/data) Operational parameters are down loaded from host computer 1GB SD Card Storage up to 200,000 cardholders at the door Up to 8,000 transactions in offline operation 3.0V rechargeable LithiumOperational parameters are down loaded from host computer
Product Codes DCM/300/004 DCM/300/101
Chapter 1 Page 28
CEM Catalogue
eDCM 300 (Board Only) eDCM 300 (Includes enclosure, board & power supply/battery charger)
06/12
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:28 Page 29
Cards and Readers - Door Hardware Features • Intelligent two door controller supporting 3rd party read heads • Support for two doors • On-board 10/100 Mbps PoE+ Ethernet connectivity to power the reader and doors via a single CAT5e/6 cable– no local mains power required • Communicates directly with the central AC2000 access control system • Database supports 200,000 cardholder records for offline card validation • Reader communications via standard Wiegand interfaces • Eight supervised inputs (four available per door • Four outputs (2 per door) • Self resetting fuses – saves maintenance time • Onboard LED provides visual status information • Dedicated tamper input • Suitable for use with AC2000 System family: AC2000 Lite AC2000 SE (Standard Edition) AC2000 AE (Airport Edition)
eDCM 330 Intelligent two door PoE+ Controller The eDCM 330 (Door Control Module) is a low cost, twodoor controller designed to interface third-party read heads with the CEM range of access control systems. The eDCM 330 also combines Power over Ethernet Plus (PoE+) connectivity, which powers all door furniture and two heavy duty maglocks via a single CAT 5e/6 network cable. Featuring PoE+ connectivity, the eDCM 330 has the benefit of eliminating the need for an external local mains power supply at the door. This is particularly beneficial where local power is not readily available or where cabling must be kept to a minimum. Using just a single Cat 5e/6 cable to power the door(s), the eDCM 330 unit can offer significant cost savings.
Using a powerful 32bit processor, the eDCM 330 has a large internal database that can store up to 200,000 cardholder records. This gives full off-line card validation and decision making capability at the point of entry, when host communication is not available. The eDCM 330 supports most third-party access control read heads conforming to the physical Wiegand (data/data) interfaces, covering a range of technologies from RF Proximity to Biometric devices. The eDCM 330 supports two door configurations. It can either be configured for one read head on each separate door, with optional Exit push buttons, or can be configured to support two reader heads (an Entry/Exit configuration)
Technical Specification
Product Codes
Physical Size: Weight: Housing: Power - Power requirement:
DCM/330/101 460x250x90mm 3.75kg steel enclosure / Colour Beige
CEQ/576/001 CEQ/576/004
Voltage PoE+ dependant 802.3at compliant 45 to 56 Volts dc - PoE Output voltage: 12Vdc @ 2.0A - Current Consumption 200mA (excluding locks and heads) - Backup Battery: Integral charging circuit provided with enclosure and space battery (Battery not supplied)
06/12
CEQ/576/008 CEQ/576/016
CEM Catalogue
eDCM 330 components mounted in enclosure. Phihong PoE MidSpan device – 1 Port (PoE36u-1AT) Phihong PoE MidSpan device – 4 Port (PoE125u-4AT) Phihong PoE MidSpan device - 8 Port (POE576U-8AT) Phihong PoE MidSpan device - 16 Port (POE576U-16AT)
Chapter 1 Page 29
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:28 Page 30
Cards and Readers - Door Hardware Features • Support for two doors • RS485 host connection • Structured database allows storage of large amounts of cardholder records for off-line card validation • Reader communications via standard Wiegand or Mag Stripe interfaces • Eight Supervised inputs (four available per door) • Two Relays (normally opened or normally closed) • Self resetting fuses – saves maintenance time • Onboard LED - provides visual status • Dedicated Tamper input • Suitable for use with AC2000 SE (Standard Edition), AE (Airport Edition) and Lite (using an Ethernet Communication Module (ECM
sDCM 300 Two Door Intelligent Serial Controller The sDCM 300 (Door Control Module) is a low cost, two-door controller designed to interface third-party read heads with the CEM range of access control systems. The sDCM 300 communicates with the AC2000 host system via RS485 communications to an S9032/64 serial controller or by TCP/IP using the Ethernet Communications Module (ECM). Using a powerful 32bit processor, the sDCM 300 gives full off-line validation and decision making at the point of entry, even when host communication is not available.
The sDCM 300 supports most third-party access control read heads conforming to the physical Wiegand/Mag Stripe (data/data, clock/data) interfaces covering a range of technologies, for example RF Proximity. Customised solutions are also available using two high speed serial RS485/RS232 interfaces to support non-standard devices such as, read/write smartcards and crypto modules. The sDCM 300 supports two door configurations. It can either be configured for two read heads on two separate doors, with optional Exit push buttons, or can be configured to support an Entry/Exit configuration for bi-directional control on a single door.
Technical Specification
Product Codes
Physical Size - Board Only - Enclosure Weight - Board Only - Enclosure Housing Wall mount Colour Power - Voltage - Current Consumption
DCM/310/004 DCM/310/101
- Voltage Backup Battery
Environmental - Temperature LED Indicators
Chapter 1 Page 30
180 x 120 x 20mm 460 x 250 x 90mm 0.1Kg 5.00kg 1.2mm steel enclosure Grey Board Only: 11 – 15Vdc
sDCM 300 (Board Only) sDCM 300 (Includes enclosure, board & power supply/battery charger)
170mA (excluding locks and heads) Enclosure: 220-230 VAC 50/60Hz. Integral charging circuit provided with enclosure and space battery (Battery not supplied).
-10° to 55°C Power, Link to host, Comms Tx/Rx, Fault / Tamper, Lock and Relay Status
CEM Catalogue
06/12
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:28 Page 31
Cards and Readers - Door Hardware Features • Low cost serial to ethernet converter • RS485 connection for multidropping up to 16 CEM serial devices on one chain • 10/100Mbps Ethernet through an RJ45 connection • Configuration connection with Tibbo Device Server Toolkit • Transparent connection between the CEM serial devices and the AC2000 Lite controller or the AC2000 SE Ethernet reader controller (RTC)
ECM Ethernet Communication Module The ECM (Ethernet Communication Module) is a serial to ethernet converter that enables CEM serial communication devices (such as the S610s reader range, InfoProx reader and the DCM 300), to connect to the AC2000 central system via an Ethernet LAN.
This provides a cost effective means of connecting groups of serial readers to the AC2000 system from a single Ethernet point. Simply load the software & configuration file supplied on the CD, and enter the network details.
A chain of up to 16 RS485 CEM devices can be connected to a single ECM (up to a maximum distance of 1.2 KM).
Technical Specifications
Product Code
Physical Size Weight Housing Housing colour Power - Voltage - Current Consumption Environmental Temperature LED Indicators
ECM/200/000
Tibbo LED Indicators
140 x 110 x 35mm 0.2Kg Plastic enclosure or PCB only Beige
ECM (Complete with PSU and Enclosure)
12Vdc 250mA (excluding reader)
-10°C to 55°C +12 Volts Power RS485 Rx and Tx Ethernet 100BaseT Ethernet Link Status Red Status Green
Functionality Inputs
10/100MB Ethernet via RJ45 connector RS232 via DB9 connector Outputs RS485 via 2 part screw terminal Reader Power Output 12V, limited to 750mA (MAX) to power a single CEM reader. Excludes lock power Configuration Configurable via Device Server Toolkit, telnet or serial connection Communication Interface To Host 10/100 Base-T TCP/IP using CAT5/6 Unshielded twisted pair Cable Connection RJ45 To RS485 Card Reader RS485 multidrop cable runs using using Belden 8723 with maximum length of 1.2km without repeater Connection 2 part screw terminal
06/12
CEM Catalogue
Chapter 1 Page 31
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:28 Page 32
Cards and Readers - HID iCLASS HID 13.56MHz Proximity iCLASS Features • Encrypted communications - advanced security between card and reader • Technology that meets a wide range of industry standards - multiple applications from one card • Choice of credential and reader styles - designs to meet most smart card requirements • Third party partners - a large number of HID approved companies to choose from for non physical access control applications • Secure formats - available in open or closed Wiegand formats to suite the application (including ADT EMEAs own tracked format)*
*A tracked format ensures that no card duplication can take place
iCLASS HID Global provides a wide variety of 13.56 MHz credentials including cards, tags and keyfobs. Some credentials also include combination technology, used in upgrading endusers from 125 kHz proximity to the benefits of 13.56 MHz smart card technology. These multiple technology credentials are ideal for companies preparing to transition from proximity technology to the additional speed and applications of high frequency smart card solutions. Optimised to make physical access control more powerful, iCLASS® 13.56 MHz read/write contactless smart card technology provides versatile interoperability and is used in a wide range of applications including access control, network log-on security, automotive vehicle identification, cashless vending, time and attendance, event management and biometric verification. Multiple securely separated files enable numerous applications and can support future capabilities. iCLASS smart cards and readers make access control more powerful, more versatile, and most important of all, offers enhanced security through encryption and mutual authentication. At the same time, iCLASS is user-friendly, delivering the convenience, affordability and reliability of proximity technology for which HID is known worldwide.
Encrypted Communication The communication between an iCLASS reader and card is encrypted using a secure algorithm so the transaction between the card and reader cannot be "sniffed" and replayed to a reader. The encryption protocol uses a combination of diversified keys, unique 64-bit card serial numbers and mutual card and reader authentication. Capability to Add Other Applications The iCLASS chip not only stores HID access control information, it also has memory space available for other applications. iCLASS cards are currently available with 2k bit, 16k, and 32k bit memory capacities, and depending on the amount of memory available and the number of memory areas, iCLASS cards can serve as multi-application credentials that can be used for many purposes. Since the memory can securely store any kind of information, applications for iCLASS include biometrics, secure computer/network authentication, health record management, time and attendance, digital cash (cafeteria & vending) and many, many more. Imagine an affordable, single-card, contactless solution that allows you to not only read data securely and quickly, but also to securely write data to the card for many applications.
ADT EU Tracked Format At this time three Wiegand Formats have been set up in JDE for the selected stock coded range of cards and tags. This includes 26bit Wiegand, a 34bit tracked format generally available to all companies and used for all of our standard products including the Galaxy Dimension range PLUS an ADT Europe 39bit tracked format. This is exclusive to ADT and is tracked by HID to ensure that there is no duplication of card ID AND secures future card business to your group.
Chapter 1 Page 32
CEM Catalogue
06/12
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:28 Page 33
Cards and Readers - HID iCLASS Features • 13.56 MHz read/write contactless smart card technology provides high-speed, reliable communications with high data integrity. • iCLASS technology ensures high security with mutual authentication, encrypted data transfer, and 64-bit diversified keys for read/write capabilities. • Any existing HID format can be factory or field programmed into the secure HID access control application area. • Available in 2k bit (256 Byte), 16k bit (2K Byte) or 32k bit (4K Byte) configurations. • Meets ISO standards for thickness for use with all direct image and thermal transfer printers • Add a magnetic stripe, barcode, anti-counterfeiting, or photo ID.
iCLASS Cards The iCLASS Card offers iCLASS 13.56 MHz contactless read/write smart card technology along the ability to add a magnetic stripe, barcode, and anti-counterfeiting features including custom artwork or a photo identification directly on the credential. The iCLASS Card meets strict ISO thickness standards for use with direct image and thermal transfer printers. Offers extremely consistent read range. Unaffected by body shielding or variable environmental conditions. Can be carried with credit cards in a wallet or purse. Use with a strap and clip as a photo ID badge. Print directly to the card with a direct image or thermal transfer printer. Slot punch vertically for easy use. This is a passive card technology, the no-battery design allows for an estimated minimum 100,000 reads.
All 16k bit (2k Byte) and 32k bit (4k Byte) iCLASS credentials have the following features: • Sufficient read/write memory to store multiple biometric templates. • 16k available in a two or sixteen application area configuration. 32k available with 16k memory configured in either 2 or 16 application areas, plus an additional 16k user configurable memory. • Multiple securely separated files enable numerous applications, including the HID standard access control application, and support future growth. • Meets ISO 15693 and 14443B for contactless communications.
All 2k bit (256 Byte) iCLASS credentials have the following features: • Available in two application area configuration only. • Provides the HID standard access control application area and one other application area for user customization. • Meets ISO 15693 standard for contactless communications. • Provides a cost effective way to improve the security of your access control installation.
06/12
CEM Catalogue
Chapter 1 Page 33
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:28 Page 34
Cards and Readers - HID iCLASS Technical Specifications Typical Maximum Read Range* R10 2.0-3.0" (5.0-7.6cm) R30/RW300 2.0-3.5" (5.0-8.9cm) R40/RW400 2.5-4.5" (6.3-11.4cm) RK40/RWK400 3.0-4.0" (7.6-10.1 cm) *Subject to environmental conditions.
RF Interface As suggested by ISO/IEC: 15693 read/write 14443B mode - 106 kbps Transaction Time <100 ms typical
Dimensions 5.40 x 8.57 x 0.084 cm max. Weight 5.7 g
Baud Rate 14443 B2 mode - 212 kbps 15693 mode - 26 kbps
Card Construction Thin, flexible polyvinyl chloride (PVC) laminate.
Memory Type EEPROM, read/write
Operating Temperature -40° to 70° C Operating Humidity 5-95% non-condensing
Multi-application Memory 2k bit (256 Byte) card - 2 application areas 16k bit (2k Byte) card - 2 or 16 application areas 32k bit (4k Byte) card - 16k bits in 2 or 16 application areas plus 16k bits user configurable.
Operating Frequency 13.56 MHz
Write Endurance Min. 100,000 cycles Data Retention 10 years
Product Codes 26bit Weigand Format - H10301 2000PGGMN-H10301 iCLASS ISO card - 2k bits with 2 application areas. Supplied plain white on both sides - encoded for 26bit Wiegand. Order must state site code and ID range order in multiples of 50 2002PGGMN-H10301 iCLASS ISO card - 16k bits with 16 application areas. Supplied plain white on both sides - encoded for 26bit Wiegand. Order must state site code and ID range order in multiples of 50 Tracked 37bit Weigand Format - H10302 2000PGGMN-H10302 iCLASS ISO card - 2k bits with 2 application areas. Supplied plain white on both sides - encoded for tracked 37bit Wiegand. Order in multiples of 50. The next available number range will be supplied. 2002PGGMN-H10302 iCLASS ISO card - 16k bits with 16 application areas. Supplied plain white on both sides - encoded for tracked 37bit Wiegand. Order in multiples of 50. The next available number range will be supplied.
Chapter 1 Page 34
CEM Catalogue
06/12
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:28 Page 35
Cards and Readers - HID iCLASS Features • The iCLASS 13.56 MHz read/write contactless smart key technology provides high-speed, reliable communications with high data integrity. • iCLASS technology ensures high security with mutual authentication, encrypted data transfer, and 64-bit diversified keys for read/write capabilities. • Any existing HID format can be factory or field programmed into the secure HID access control application area. • Available in 2k bit (256 Byte), 16k bit (2k Byte) or 32k bit (4k Byte) configurations. • Molded plastic enclosure provides durability in harsh environments. • Can be placed on a key ring or clipped to a lanyard for convenient entry.
iCLASS Smart Key The iCLASS Key provides the convenience of iCLASS 13.56 MHz contactless read/write smart card in a molded plastic key fob enclosure that is durable in a harsh environment. This key fob is the size of a typical automotive key and offers custom artwork printing capabilities directly on the key fob credential. You now can offer a credential that can be placed on a key ring or lanyard for such diverse applications including access control, network log-on security, automotive vehicle identification, cashless vending, time and attendance, and biometric verification. iCLASS® was specifically designed to make access control more powerful, more versatile, and more secure. All radio frequency data transmission between the key and reader is encrypted using a secure algorithm. By using industry standard encryption techniques, iCLASS reduces the risk of compromised data or duplicated keys. For even higher security, the key data may also be protected with DES or triple DES encryption. Multiple securely separated application areas are each protected by 64-bit diversified read/write keys which allow complex applications and provide for future expansion. Security mechanisms such as mutual authentication and encryption are efficiently combined with fast processing and data communication, resulting in transaction times of less than 100 milliseconds for a typical secure e-purse transaction.
06/12
CEM Catalogue
Additional Benfits All 2k bit (256 Byte) iCLASS credentials have the following features: • Available in two application area configuration only. • Provides the HID standard access control application area and one other application area for user customization. • Meets ISO 15693 standard for contactless communications. • Provides a cost effective way to improve the security of your access control installation. All 16k bit (2k Byte) and 32k bit (4k Byte) iCLASS credentials have the following features: • Sufficient read/write memory to store multiple biometric templates. • 16k available in a two or sixteen application area configuration. 32k available with 16k memory configured in either 2 or 16 application areas, plus an additional 16k user configurable memory. • Multiple securely separated files enable numerous applications, including the HID standard access control application, and support future growth. • Meets ISO 15693 and14443B for contactless communications.
Chapter 1 Page 35
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:28 Page 36
Cards and Readers - HID iCLASS Technical Specifications RF Interface As suggested by ISO/IEC: 14443B read/write (16k only) 15693 read/write
Typical Maximum Read Range* R10 1.0” (2.5 cm) R30/RW300 1.0” (2.5 cm) R40/RW400 1.0” (2.5 cm) RK40/RWK400 1.0” - 1.5” (2.5 cm - 3.8 cm) *Dependent upon installation conditions.
Transaction Time <100 ms typical
Dimensions 3.43 x 3.18 x 3.84 cm
Baud Rate 14443B mode - 106 kbps 15693 read/write - 26 kbps
Weight 4.9g
Memory Type EEPROM, read/write Multi-application Memory 2k bit (256 Byte) key – 2 application areas 16k bit (2k Byte) key – 2 or 16 application areas 32k bit (4k Byte) card – 16k bits in 2 or 16 application areas plus 16k bit user configurable.
Keyfob Construction Ultrasonically welded polycarbonate shell. Operating Temperature -40° to 70° C Operating Humidity 5-95% non-condensing
Write Endurance Min. 100,000 cycles
Operating Frequency 13.56 MHz
Data Retention 10 years
Product Codes 26bit Weigand Format - H10301 2050PKNMN-H10301 iCLASS contactless smart Key - 2k bits with 2 application areas. Supplied plain white on both sides - encoded for 26bit Wiegand. Order must state site code and ID range - order in multiples of 100 2052PKNMN-H10301 iCLASS Contactless Smart Key - 16k bits with 16 application areas. Supplied plain white on both sides - encoded for 26bit Wiegand. Order must state site code and ID range - order in multiples of 100 Tracked 34bit Weigand Format - H10302 2050PKNMN-H10302 iCLASS Contactless Smart Key - 2k bits with 2 application areas. Supplied plain white on both sides - encoded for tracked 34bit Wiegand. Order in multiples of 100 The next available number range will be supplied. 2052PKNMN-H10302 iCLASS Contactless Smart Key - 16k bits with 16 application areas. Supplied plain white on both sides - encoded for tracked 34bit Wiegand. Order in multiples of 100 The next available number range will be supplied.
Chapter 1 Page 36
CEM Catalogue
06/12
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:28 Page 37
Cards and Readers - HID iCLASS Features • 13.56 MHz read/write contactless smart card technology provides high-speed, reliable communications with high data integrity. • iCLASS technology ensures high security with mutual authentication, encrypted data transfer, and 64-bit diversified keys for read/write capabilities. • Any existing HID format can be factory or field programmed into the secure HID access control application area. • Available in 2k bit (256 Byte), 16k bit (2K Byte) or 32k bit (4K Byte) configurations.
iCLASS Tag The iCLASS Tag provides the convenience of iCLASS technology in a coin-sized, disk-shaped transponder that can be simply attached to any nonmetallic card or device to instantly have 13.56 MHz read/write contactless smart card technology to utilize as a transition device during the rebadging process. You can seamlessly upgrade from Wiegand, magnetic stripe or barium ferrite technologies and can easily and costeffectively turn an existing plastic ID badge or contact smart card into a contactless proximity credential. iCLASS® was specifically designed to make access control more powerful, more versatile, and more secure. All radio frequency data transmission between the tag and reader is encrypted using a secure algorithm. By using industry standard encryption techniques, iCLASS reduces the risk of compromised data or duplicated tags. For even higher security, the tag data may also be protected with DES or triple-DES encryption. Multiple securely separated application areas are each protected by 64-bit diversified read/write keys which allow complex applications and provide for future expansion. Security mechanisms such as mutual authentication and encryption are efficiently combined with fast processing and data communication, resulting in transaction times of less than 100 milliseconds for a typical secure e-purse transaction.
06/12
CEM Catalogue
Additional Benefits All 2k bit (256 Byte) iCLASS credentials have the following features: • Available in two application area configuration only. • Provides the HID standard access control application area and one other application area for user customization. • Meets ISO 15693 standard for contactless communications. • Provides a cost effective way to improve the security of your access control installation. All 16k bit (2k Byte) and 32k bit (4k Byte) iCLASS credentials have the following features: • Sufficient read/write memory to store multiple biometric templates. • 16k available in a two or sixteen application area configuration. 32k available with 16k memory configured in either 2 or 16 application areas, plus an additional 16k user configurable memory. • Multiple securely separated files enable numerous applications, including the HID standard access control application, and support future growth. • Meets ISO 15693 and 14443B for contactless communications.
Chapter 1 Page 37
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:28 Page 38
Cards and Readers - HID iCLASS Technical Specifications Typical Maximum Read Range* R10 1.0” (2.5 cm) R30/RW300 1.0” (2.5 cm) R40/RW400 1.0” (2.5 cm) RK40/RWK400 1.0” - 1.5” (2.5 cm - 3.8 cm) *Dependent upon installation conditions.
RF Interface As suggested by ISO/IEC: 14443B read/write (16k only) 15693 read/write Transaction Time <100 ms typical
Dimensions Diameter: 1.285” (3.264 cm) Thickness: 0.070” (0.178 cm)
Baud Rate 14443B mode - 106 kbps 15693 mode - 26 kbps
Weight 1.18 g Outer Shell Material Lexan
Memory Type EEPROM, read/write
Operating Humidity 5-95% non-condensing
Multi-application Memory 2k bit (256 Byte) tag – 2 application areas 16k bit (2k Byte) tag – 2 or 16 application areas 32k bit (4k Byte) card – 16k bits in 2 or 16 application areas plus 16k bits user configurable.
Operating Frequency 13.56 MHz
Write Endurance Min. 100,000 cycles
Operating Temperature -40° to 70° C
Data Retention 10 years
Product Codes 26bit Weigand Format - H10301 2060PSSMU-H10301 iCLASS Contactless Smart Key - 2k bits with 2 application areas. Supplied in grey with internal number injetted on the tag. Encoded for 26bit Wiegand Format. Order must state site code and ID range - order in multiples of 100 2062PSSMU-H10301 iCLASS Contactless Smart Key - 16k bits with 16 application areas. Supplied in grey with internal number injetted on the tag. Encoded for 26bit Wiegand Format. Order must state site code and ID range - order in multiples of 100 Tracked 34bit Weigand Format - H10302 2060PSSMU-H10302 iCLASS Contactless Smart Key - 2k bits with 2 application areas. Supplied in grey with internal number injetted on the tag. Encoded for 34bit Tracked Wiegand Format. The next number range will be supplied. Order in multiples of 100 2062PSSMU-H10302 iCLASS Contactless Smart Key - 16k bits with 16 application areas. Supplied in grey with internal number injetted on the tag. Encoded for 34bit Tracked Wiegand Format. The next number range will be supplied. Order in multiples of 100
Chapter 1 Page 38
CEM Catalogue
06/12
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:28 Page 39
Cards and Readers - HID iCLASS Features • 13.56 MHz read/write contactless smart card and 125 kHz technology provides high-speed, reliable communications with high data integrity. • iCLASS technology ensures high security with mutual authentication, encrypted data transfer, and 64-bit diversified keys for read/write capabilities. • Any existing HID format can be factory or field programmed into the secure HID access control application area. • Available in 2k bit (256 Byte), 16k bit (2K Byte) or 32k bit (4K Byte) configurations. • Meets ISO standards for thickness for use with all direct image and thermal transfer printers. • Add a magnetic stripe, barcode, anti-counterfeiting, or photo ID.
iCLASS Prox Card The iCLASS Prox Card combines iCLASS 13.56 MHz contactless read/write smart card and Prox 125 kHz proximity technology on a single card with the ability to add magnetic stripe, barcode, and anti-counterfeiting features including custom artwork or a photo identification directly on the credential. Your iCLASS Prox Card can now be utilized for such diverse applications including access control, network log-on security, automotive vehicle identification, cashless vending, time and attendance, and biometric verification. As you integrate and/or migrate to an iCLASS platform from proximity technology readers. And, you have the option of assigning various security levels to the cards depending on the credential holder. The iCLASS Prox Card meets strict ISO thickness standards for use with direct image and thermal transfer printers. iCLASS® was specifically designed to make access control more powerful, more versatile, and more secure. All radio frequency data transmission between the card and reader is encrypted using a secure algorithm. By using industry standard encryption techniques, iCLASS reduces the risk of compromised data or duplicated cards. For even higher security, the card data may also be protected with DES or triple DES encryption. Multiple securely separated application areas are each protected by 64-bit diversified read/write keys which allow complex applications and provide for future expansion.
Additional Benefits All 2k bit (256 Byte) iCLASS credentials have the following features: • Available in two application area configuration only. • Provides the HID standard access control application area and one other application area for user customization. • Meets ISO 15693 standard for contactless communications. • Provides a cost effective way to improve the security of your access control installation. All 16k bit (2k Byte) and 32k bit (4k Byte) iCLASS credentials have the following features: • Sufficient read/write memory to store multiple biometric templates. • 16k available in a two or sixteen application area configuration. 32k available with 16k memory configured in either 2 or 16 application areas, plus an additional 16k user configurable memory. • Multiple securely separated files enable numerous applications, including the HID standard access control application, and support future growth. • Meets ISO 15693 and 14443B for contactless communications. • Meets ISO 15693 and 14443B for contactless communications.
Security mechanisms such as mutual authentication and encryption are efficiently combined with fast processing and data communication, resulting in transaction times of less than 100 milliseconds for a typical secure e-purse transaction.
06/12
CEM Catalogue
Chapter 1 Page 39
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:28 Page 40
Cards and Readers - HID iCLASS Technical Specifications Typical Maximum Read Range* R10 2.0-3.0" (5.0-7.6cm) R30/RW300 2.0-3.5" (5.0-8.9cm) R40/RW400 2.5-4.5" (6.3-11.4cm) RK40/RWK400 3.0-4.0” (7.6-10.1 cm) *Dependent upon installation conditions. Dimensions 5.40 x 8.57 x 0.084 cm Weight 6.8 g Card Construction Thin, flexible polyvinyl chloride (PVC) laminate. Operating Temperature -40° to 70° C) Operating Humidity 5-95% non-condensing Operating Frequency 13.56 MHz 125 kHz
RF Interface As suggested by ISO/IEC: 14443B read/write (16k only) 15693 read/write Transaction Time <100 ms typical Baud Rate 14443 B mode - 106 kbps 15693 mode - 26 kbps Memory Type EEPROM, read/write Multi-application Memory 2k bit (256 Byte) card – 2 application areas 16k bit (2k Byte) – 2 or 16 application areas 32k bit (4k Byte) card – 16k bit in 2 or 16 application areas plus 16k bit user configurable. Write Endurance Min. 100,000 cycles Data Retention 10 years
This multi technology card allows easy changeover from 125kHz to 13.56M Hz Smart Cards on a site. This format can be the same or different in the technologies. Due to the numerous options for open & tarcked formats to be applied to either the low or high rgequency technology in this card, we have not stock coded these items. An HID card order form must be supplied with your NSL (Non Stock Listed) order directly stating the format and site code/ID range etc..
Chapter 1 Page 40
CEM Catalogue
06/12
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:28 Page 41
Cards and Readers - HID iCLASS Features • Format Portability - Upgrading is completely transparent since the same Prox format and user identification numbers are brought across to your iCLASS credentials, including HID Corporate 1000 formats. Also, Elite custom key program is available for a higher level of security. • Secure - All RF data transmission between the card and reader is encrypted using a secure algorithm. By using industry-standard encryption techniques and advanced key management systems, iCLASS reduces the risk of compromised data or duplicated cards. • Interoperability - iCLASS is based on ISO interoperability standards providing compatibility with many popular card technologies (ISO 15693, ISO 14443A and ISO 14443B). • Optimal Read Range Performance - An auto-tuning feature automatically adjusts the reader for optimal read range performance on any mounting surface.
iCLASS Readers iCLASS readers are user-friendly, delivering the same convenience and reliability of HID's world-renowned Prox technology, with state-of-the-art features, driven by evolving industry requirements. Upgrading from Prox to iCLASS technology has never been so simple. All iCLASS readers provide the same wiring connections, low-current consumption and 5 to 16 volt operation as our Prox readers. Additionally, you can transfer your Prox format and user identification numbers to iCLASS credentials, making the change completely transparent to your access control system.
Additional Benefits Security 64-bit authentication keys are extremely secure. Readers and cards require matching keys to function. All RF data transmission between the card and reader is encrypted using a secure algorithm. The key management system reduces the risk of compromised data or duplicated cards. Elite Custom Keys Custom keys provide the highest level of security, where cards and readers are uniquely matched to individual sites or customers, and are non-interchangeable. Combining Elite custom keys with our Corporate 1000 can offer companies a scalable solution that can be implemented in facilities worldwide. Audiovisual Indication Audio sounder provides various tone sequences to signify access granted, access denied, power up and diagnostics. Visually impaired cardholders can easily distinguish between access granted and access denied. A highintensity light bar provides a clear visual status indication in red, green or amber, even in bright sunlight. Note: Light bar will illuminate amber when a FIPS 201/PIV card is read. Easily Interfaced The reader's Wiegand output easily interfaces with most existing Wiegand and Clock-and-Data protocol access control panels. The reader reads standard proximity format data from HID iCLASS® cards and will output data as encoded. When reading ISO 14443A cards (MIFARE®/ DESFire®), the reader can be configured to output 26-bit, 32-bit (MSB), 32-bit (LSB), 34-bit, 40-bit or 56-bit Wiegand formats based on the CSN (card serial number).
06/12
CEM Catalogue
Chapter 1 Page 41
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:28 Page 42
Cards and Readers - HID iCLASS Indoor/Outdoor Design Rugged, weatherised polycarbonate enclosure, designed to withstand harsh environments, provides reliable performance and is suitable for both internal and external applications
R40 R10 6100C 6120C iCLASS Card : Up to 3.25" (8.9 cm) iCLASS Card : Up to 4.75" (12.1 cm) iCLASS Key/Tag : Up to 1.5" (3.8 cm) iCLASS Key/Tag : Up to 2.0" (5.1 cm) MIFARE / DESFire Card MIFARE / DESFire Card (CSN) (CSN) : Up to 2.0" (5.1 cm) Up to 2.5" (6.4 cm) Mounting The R10 are physically the smallest The R40 is designed to mount and cover readers and are ideally suited for single gang switch boxes primarily used in the mullion-mounted door installations, United States and includes a slotted mounting U.S. single-gang J-box or any flat surface plate for European and Asian back box spacing. (Reader will not cover junction box). Dimensions 4.8 cm x 10.3 cm x 2.3 cm 8.4 cm x 12.2 cm x 2.4 cm Power Supply 5-16 VDC, Linear supply recommended Current Requirements 55mA AVG, 116mA PEAK 55mA AVG, 121mA PEAK Operating Temperature -35º to 65º C Operating Humidity 5% to 95% relative humidity non-condensing Transmit Frequency 13.56 MHz Cable Distance Wiegand Interface 500ft (150m) 22 AWG Card Compatibility · 15693 - read only; 2k bit (256 Byte), 16k bit (2k Byte), 32k bit (4k Byte) iCLASS credentials, serial number · 14443B - read only; 2k bit (256 Byte), 16k bit (2k Byte), 32k bit (4k Byte) iCLASS credentials serial number · 14443A - read only; MIFARE® and DESFire (serial number) · US Government PIV · FeliCa IDm (Transit Readers Only) · CEPAS CAN/CSN (Transit Readers Only) Environmental IP55 Certifications UL294/cUL (US), FCC Certification (US), IC (Canada), CE (EU), C-tick (Australia, New Zealand), SRRC (China), MIC (Korea), NCC (Taiwan), iDA (Singapore), RoHS Housing Material UL94 Polycarbonate Warranty Warrantied against defects in materials and workmanship for life. (See HID complete warranty policy for details - www.hidglobal.com.) * Model Numbers ** Read Range
Product Codes ADT branded readers 6100CKN0000ADT1 6120CKN0000ADT1 6130CKN0000ADT1 Unbranded readers 6100CKN0000 6100CKT0000 6120CKN0000 6120CKT0000 6130CKN000000
6130CKT000000
Chapter 1 Page 42
ADT branded HID R10 iCLASS reader with 45.7cm pigtail ADT branded HID iCLASS R30 READER - 32 BIT with 45.7cm pigtail ADT branded HID RK40 iCLASS red + PIN with 45.7cm pigtail
iCLASS R10 contactless smart card reader - mullion mounted - black. Supplied with 18" (0.5m) pigtail. Provides a Wiegand output to the access control system. iCLASS R10 contactless smart card reader - mullion mounted - black. Supplied with terminal block. Provides a Wiegand output to the access control system. iCLASS R40 contactless smart card reader - EU back Box mount - black. Supplied with 18" (0.5m) pigtail. Provides a Wiegand output to the access control system. iCLASS R40 contactless smart card reader - EU Back Box mount - black. Supplied with terminal block. Provides a Wiegand output to the access control system. iCLASS RK40 contactless smart card reader with keypad - EU back Box mount - black. Supplied with 18" (0.5m) pigtail. Provides a Wiegand output for card and Wiegand bust for keypad to the access control system. iCLASS RK40 contactless smart card reader with keypad - EU Back Box mount - black. Supplied with terminal block. Provides a Wiegand output for card and Wiegand bust for keypad to the access control system.
CEM Catalogue
06/12
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:28 Page 43
Cards and Readers - HID iCLASS Features • Simple Migration from the most popular proximity technologies to iCLASS® • Open Architecture Design allows project specific formats and keys • Provides flexible options for processing multi-technology cards and configuring the reader's audio/visual characteristics • All HID card formats carryover • Reads: 125 kHz - HID, (Indala - special order) or AWID proximity, 13.56 MHz - iCLASS, DESFire® - ISO 15693 CSN (MyD, I Code, Tag It), ISO 14443A CSN (MIFARE®)
iCLASS RP15 The RP15 is a multi-technology card reader designed for customers upgrading their current card system from some of the most popular proximity formats to iCLASS® credentials. With the RP15 reader, the customer has the ability to transition to smart cards over time while incorporating the use of multiple card technologies within a single building or across multiple facilities. The RP15 multiCLASS reader is specifically designed to assist customers with the transition from the popular HID MiniProx® and other mullion mounted reader form factors. The RP15 features the same mounting dimensions as the MiniProx to allow for an easy direct replacement. Only the multiCLASS family of products provides true iCLASS security, the ease of Prox, the power of smart cards and the confidence of choosing HID, the worldwide leader in access control.
13.56 MHz contactless smart cards • ISO 15693 - read only; 2k bit (256 Byte), 16k bit (2k Byte) and 32k bit (4k Byte); serial number • ISO 14443A - read only; MIFARE (serial number) • ISO 14443B - read only; 2k bit (256 Byte) and 16k bit (2k Byte) • Sony FeliCa™ IDm (requires Transit p/n 6144) • CEPAS CAN or CSN (requires Transit p/n 6144)
Technical Specifications
Product Code
Typical Read Range iCLASS Card 7.5 - 9.0 cm iCLASS Key/Tag 2.5 - 4.0 cm HID Prox ISO Card 6.5 - 9.0 cm HID Prox Clamshell Card 9.0 - 10.0 cm HID Prox Keyfob/Tag 3.2 - 4.5 cm Indala Proximity ISO Card 4.0 - 5.0 cm Indala Proximity Clamshell Card 4.5 - 5.5 cm Indala Proximity Keyfob/Tag 2.5 - 3.2 cm
6145CGN000
HID multiCLASS mullion reader - grey cover. Supplied with 18" pigtail. This reader will provide a Wiegand output from HID 125kHz prox and iCLASS credentials.
Dimensions 15.6 cm x 4.8 cm x 2.3 cm Card Compatibility 125 kHz Proximity • HID or Indala proximity cards, key fobs, and tags. • AWID Credentials
06/12
CEM Catalogue
Chapter 1 Page 43
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:28 Page 44
Cards and Readers - CEM Features • Utilises existing Ethernet connectivity – reduced cabling • Internal database brings intelligence to the door – ensuring 24/7 card validation • Suitable for indoor or outdoor installation • Keypad for added PIN security
EtherProx Reader The EtherProx reader is the industry’s smallest Ethernet card reader with integrated keypad, LCD display and internal database giving off-line validation and intelligent decision-making at the point of entry, even when host communications are not available. The reader also stores transaction details to be transferred to the host computer when communications are restored.
Available in both traditional 125 kHz Proximity (EPO200) and MiFare smart card (EPO210) options, the EtherProx communicates directly with the central server via Ethernet removing the need for a door control panel in the system design.
Product Codes SPASS-EPO-200-B EtherProx Reader (125 kHz Proximity) EMEA SPASS-EPO-210-B EtherProx Reader (Mifare CSN) EMEA)
Features • Internal database ensures 24/7 Intelligence at the door for continuous operations • IP rated 65 - Suitable for indoor or out door use • Keypad for added PIN security, LCD display to show meaningful card outcomes such as ‘Wrong Time Zone’
InfoProx Reader The InfoProx offers all the same features available in the EtherProx (such as LCD display and off line validation) but it connects to the central server via RS485 and requires an S9032 or S9064 controller in the system design.
Product Codes SPASS-IPO-200-B SPASS-IPO-210-B
InfoProx Reader (125 kHz Proximity) EMEA InfoProx Reader (Mifare CSN) EMEA
InfoProx Exit Reader The InfoProx Exit is designed for any area where exit door control is required in addition to entry control. InfoProx Exit readers can be used in conjunction with the InfoProx and EtherProx card readers for exit access..
Product Codes SPASS-IPX-200-B InfoProx Exit (125 kHz Proximity) EMEA SPASS-IPX-210-B InfoProx Exit (Mifare CSN) EMEA
Chapter 1 Page 44
CEM Catalogue
06/12
New_CEM_Covers 3:Layout 1 06/03/2012 10:18 Page 16
For more information on CEM products please call: +44(0)2890 45 6767 Email
[email protected] or contact your CEM account representative. Please visit us at www.cemsys.com UK Distribution Centre (Warehousing/Distribution/Purchasing) Dunhams Lane Letchworth Hertfordshire SG6 1BE United Kingdom Tel: +44 (0) 1462 667 700 Fax: +44 (0) 1462 667 777 E-mail:
[email protected]
For more detailed product information, please visit us at www.tycoemea.com Head Office: ADT Fire and Security plc, Security House, The Summit, Hanworth Road, Sunbury-on-Thames, Middlesex TW16 5DB. ADT and the ADT logo are registered trademarks of ADT Services AG and are used under license. ADT reserves the right to modify or withdraw any product or service without notice.
World leader in fire and security solutions PMC0016B Is. 1.2 06.12
© 2012 Tyco International
