Transcript
PRICE LIST 2012
TECHNOLOGIES
OYSTER The new clean technology for the houses of the future.
ACQUAPLUS An easy and inexpensive system for recovering all the heat in your fireplace.
ACTIVE Smart technology where the stove or fireplace decide for themselves the best way to run.
COMFORT AIR A wood and pellet burning heating system that stands out from the rest. 4
5
COMFORT AIR SLIM/BASIC
ALUTEC
Pat. Pend. n. PN2008U000004
HOT AIR OUTLETS CAN BE POSITIONED UP TO 8 METRES AWAY, AS YOU WISH.
EASY INSTALLATION AND MAINTENANCE.
Comfort Air® can effectively carry the warm air into other rooms up to a maximum distance of 8 real metres with an output temperature of up to 80 °C. Unlike traditional systems in which the hot air outlets must be positioned at the top, the Comfort Air® outlets can be positioned as you wish, with obvious architectural and aesthetic advantages.
Thanks to the use of significantly lower diameters (60 mm and 100 mm) compared to the market standard, Comfort Air® provides easier insertion of the ducting into the wall, limiting the necessary masonry work, which often takes time and can be very invasive. Moreover, the maintenance of fans is easy, since they are located in the hot air outlets (Basic) or between the glass-fronted fireplace and the hot air outlets (Slim).
GREATER EFFICIENCY WITH LOWER CONSUMPTION LEVELS.
CLEAN AND SCENTED WARM AIR.
MORE AIR, LESS NOISE.
(In this glass-fronted fireplace application) The Comfort Air® system filters the entering air drastically limiting the entry of dust into the room. The filter is easy to extract and clean. The hot air outlets can be positioned as desired for rational air distribution, choosing among the various Slim and Basic models. (When applied to a fireplace) a tank located inside the Flip, Float, Ghost and Mono 20 hot air outlets contains water that vaporises when the hot air exits the system. This ensures correct humidification of the room. Fragrances and essences can be added to the tank for a pleasant aromatherapy effect .
Greater efficiency than traditional systems in terms of air released into the room and a significantly lower noise level.
Comfort Air® from MCZ extracts the heat produced by the glass-fronted fireplaces with greater efficiency by means of an extractor located in the glass-fronted fireplace outlet. Compared to traditional systems, Comfort Air® allows you to increase the heat introduced into the room by 30%. This provides rapid, uniform distribution and allows you to save fuel.
TOTAL CONTROL OF AIR CIRCULATION. Thanks to the two independent electrically adjustable fans (in stoves) and the electronic control unit that can control up to two ducts (in glass-fronted fireplaces), Comfort Air® allows precise control of heat distribution between the different rooms where the air is ducted.
MORE LIGHT FOR THE FLAME. ®
Alutec is an MCZ patented material widely used in the fire boxes of stoves and glass-fronted fireplaces. The light-coloured mixture with a high aluminium oxide content gives great luminosity to the flame and increases the power of the reflected heat. What’s more, by storing up heat, it also makes for excellent combustion.
REMOTE CONTROL. Many of MCZ's pellet products are GSM READY, in other words designed for activation via remote connection to the modem on your GSM mobile phone.
RELAX > This is the solution which foresees a remote control with few keys and a host of preset programmes (switch on and switch off). In addition, a room thermostat has been incorporated into the remote control to allow greater temperature control. EASY > A simplified solution featuring a control panel located on the stove, with easy and intuitive functions.
SYMBOLS USED Nominal heat output
Right corner Left corner
Efficiency
Right corner with bench Diameter of smoke outlet pipe Left corner with bench Weight Wall with right-hand bench
ACTIVE PELLET TYPE IS NO LONGER A PROBLEM. Because the stoves equipped with the Active system adapt automatically to any pellet length and with a diameter of 6-8 mm.
BURNING THE BEST, ALWAYS.
FACILITATED INSTALLATION.
Thanks to the extremely reliable and accurate sensor inside the stove, the combustion air is constantly adjusted according to the quantity of pellets present in the grate, thus ensuring effective and efficient combustion, which translates into lower consumption, lower emissions and much less frequent cleaning .
The combustion is effective and efficient regardless of the type of flue pipe connection which with conventional systems can be a problem during installation.
Dimensions - width x depth x height
Wall with left-hand bench
Fluid heat output
Wall Semi-recessed wall
Minimum room volume 45° corner Hourly consumption
11 12 1 10 9
2
8
4
3 7
OYSTER
V`Z[LY
FULLY WATERTIGHT STRUCTURE.
SAFE AND SECURE ENVIRONMENT.
Products built with Oyster technology, due to their fully watertight structure, do not draw on the oxygen inside the room. Instead, they draw air from the outside and can therefore be fitted in any properly insulated homes and in passive houses.
This technology eliminates all risk of smoke being released into the room.
6
45° corner with right-hand bench
6 5
Fire box dimensions
45° corner with left-hand bench
VENTILATION GRILLES NO LONGER REQUIRED. Forget the annoying flow of cold air that makes the room less comfortable, compromising the overall efficiency of the system and, in some cases, ruining the aesthetic "cleanliness" of the walls.
7
PELLET > STOVES
PELLET > STOVES €
DESCRIPTION/CODE
€
STRUCTURE Comfort Air®
7112003
2.180,00
White ceramic_102
6912009
280,00
Bordeaux ceramic_105
6912011
280,00
Black ceramic_107
6912010
280,00
40160428
480,00
4011051 4011050
85,00 120,00
Comfort Air®
7112006
2.180,00
Serpentino_240
6912015
370,00
40160428
480,00
4011051 4011050
85,00 120,00
CLADDINGS
SUPPLIED AS STANDARD WITH MAX remote control
DEDICATED ACCESSORIES Modem
FLAT Comfort Air
GSM modem for Active. Allows remote connection with GSM mobile phone.
PRODUCT TYPE: Pellet stove for hot air production with forced convection; the air is released through the front diffuser. Possibility of ducting the air into other rooms - up to 8 metres - with the help of MCZ Comfort Air® technology. Reduced depth to facilitate installation in confined spaces; can be installed back to wall. Rear or top smoke outlet pipe. MATERIALS: Steel: structure Cast iron: grate, door Alutec®: combustion chamber Ceramic: top and right side (left version not available) Painted metal: front panels
kW 8
87,7 %
Ø cm 8
kg 125
7111031
Comfort Air
>>>
2.530,00
White metal_302
6911029
140,00
Black metal_303
6911030
140,00
Aluminium metal_315
6911031
140,00
Bordeaux metal_304
6911032
140,00
Bronze metal_305
6911033
140,00
SUPPLIED AS STANDARD WITH MAX remote control
DEDICATED ACCESSORIES
SUPPLIED AS STANDARD WITH
Modem
Remote control MAX kW 9
87,7 %
Ø cm 8
kg 135
Comfort Air®
To build a Comfort Air® channelling system > p. 45
CLADDINGS
CLADDINGS
MATERIALS: Steel: structure Cast iron: grate, door Alutec®: combustion chamber Aluminium: top Painted metal: front panels
Comfort Air® accessories
STRUCTURE ®
PRODUCT TYPE: Pellet stove for hot air production with forced convection. Possibility of ducting the air into other rooms - up to 8 metres with the help of MCZ Comfort Air® technology. Fans adjustable to 3 settings. Reduced depth to facilitate installation in confined spaces.
Anthracite painted metal Tempered glass
cm 79 x 29,1 x 107
STRUCTURE
PHILO Comfort Air
For “slim” stoves.
Floor protection
GSM modem for Active. Allows remote connection with GSM mobile phone.
cm 90 x 27 x 116
DEDICATED ACCESSORIES 40160428
Modem
480,00
GSM modem for Active. Allows remote connection with GSM mobile phone.
For “slim” stoves.
Anthracite painted metal Tempered glass
Comfort Air® accessories
Comfort Air®
Floor protection
>>>
To build a Comfort Air® channelling system > p. 45
4011051 4011050
85,00 120,00
FLAIR Comfort Air
Floor protection For “slim” stoves.
Anthracite painted metal Tempered glass
PRODUCT TYPE: Pellet stove for hot air production with forced convection; the air is released through the front diffuser. Possibility of ducting the air into other rooms - up to 8 metres - with the help of MCZ Comfort Air® technology. Reduced depth to facilitate installation in confined spaces; can be installed back to wall. Rear or top smoke outlet pipe.
Comfort Air® accessories
Comfort Air®
MATERIALS: Steel: structure Cast iron: grate, door Alutec®: combustion chamber Serpentine: top and right side (left version not available) Painted metal: front panels
kW 8
14
>>>
To build a Comfort Air® channelling system > p. 45
87,7 %
Ø cm 8
kg 130
cm 79 x 29,5 x 107
15
PELLET
DESCRIPTION/CODE
PELLET > STOVES DESCRIPTION/CODE
€
DESCRIPTION/CODE
€
STRUCTURE
STRUCTURE Air
7111018
1.525,00
Air
7109001
1.770,00
Oyster
7110008
2.425,00
Comfort Air®
7111008
2.050,00
Hydro
7109006
2.690,00
Hydro - High efficiency pump
7110015
2.795,00
CLADDINGS White metal_302
6910006
155,00
Black metal_303
6910007
155,00
Red metal_314
6910008
155,00
White metal_302
6909001
160,00
Aluminium metal_315
6910009
155,00
Dark metal_308
6909002
160,00
Bordeaux metal_304
6910010
155,00
Silver metal_313
6909003
160,00
Bordeaux metal_304
6909004
160,00
Inox no touch metal_311
6909005
340,00
4009001
40,00
40160428
480,00
Air - Comfort Air
4009016
13,00
Conduit for additional hopper
Hydro
4009019
20,00
EGO Comfort Air
Terminal check valve + pressure gauge
Hydro
4009020
20,00
PRODUCT TYPE: Pellet stove for hot air production with forced convection. Possibility of ducting the air into other rooms - up to 8 metres with the help of MCZ Comfort Air® technology.
Pellet auger for remote hopper
Hydro
40A11012
515,00
MATERIALS: Steel: structure, stainless steel side Metal: painted sides Cast iron: grate, door, front elements, top Alutec®: combustion chamber
Electronic control - pellet level sensors for remote hopper
Hydro
40A11013
220,00
CLADDINGS
DEDICATED ACCESSORIES Remote control
4009001
40,00
Optional.
KAIKA Air/Oyster
EGO Air
PRODUCT TYPE: Pellet stove for hot air production with forced convection. Available in OYSTER for passive houses.
PRODUCT TYPE: Pellet stove for hot air production with forced convection.
DEDICATED ACCESSORIES Remote control
Modem
4010003
550,00
Optional. Allows remote connection with GSM mobile phone.
MATERIALS: Steel: structure Aluminium: front Cast iron: grate, door Alutec®: combustion chamber
Optional.
MATERIALS: Steel: structure, stainless steel side Metal: painted sides Cast iron: grate, door, front elements, top Alutec®: combustion chamber
Modem GSM modem for Active. Allows remote connection with GSM mobile phone.
External thermostat interface kW 8 kW 6/5,4
92,8 %
Ø cm 8
kg 120
91,7 %
Ø cm 8
kg 140
Power board to be inserted into the mother board. Makes it possible to use a remote thermostat.
cm 52 x 53 x 105,7
cm 45 x 48 x 90
STRUCTURE 7111017
Air
1.505,00
CLADDINGS Dark metal_308
6910002
135,00
Silver metal_313
6910003
135,00
Bordeaux metal_304
6910001
135,00
4009001
40,00
4010003
550,00
To feed the pellet stove from a remote hopper. Length 2 m
Control unit complete with brackets for remote hoppers.
DEDICATED ACCESSORIES Remote control
kW 8
91,7 %
Ø cm 8
kg 140
cm 52 x 53 x 105,7
Optional.
Modem Optional. Allows remote connection with GSM mobile phone.
FACE Air
PRODUCT TYPE: Pellet stove for the production of hot air/convective heat and hot water for central heating.
MATERIALS: Steel: structure, stainless steel side Metal: painted sides Cast iron: grate, door, front elements, top Alutec®: combustion chamber
MATERIALS: Steel: structure, stainless steel side Metal: painted sides Cast iron: grate, door, front elements, top
92,8%
Ø cm 8
kg 120
kW 11,6
cm 51 x 48 x 91
Comfort Air® accessories
>>>
To build a Comfort Air® channelling system > p. 45
EGO Hydro
PRODUCT TYPE: Pellet stove for hot air production with forced convection.
kW 6
Air - Comfort Air®
91,5 %
Ø cm 8
kg 175
cm 52 x 53 x 105,7
kW 10
16
17
Comfort Air®
PELLET
PELLET > STOVES
PELLET > STOVES
PELLET > STOVES €
DESCRIPTION/CODE
€
PELLET
DESCRIPTION/CODE STRUCTURE Air
7109001
1.770,00
Comfort Air®
7111008
2.050,00
Hydro
7109006
2.690,00
Hydro - High efficiency pump
7110015
2.795,00
Salt and pepper ceramic_110
6909006
340,00
Bordeaux ceramic_105
6909007
340,00
Old amber ceramic_111
6909008
340,00
Soapstone_202
6909025
650,00
Serpentino_240
6909009
450,00
4009001
40,00
40160428
480,00
Air - Comfort Air
4009016
13,00
Conduit for additional hopper
Hydro
4009019
20,00
Terminal check valve + pressure gauge
Hydro
4009020
20,00
CLADDINGS
STAR Air
DEDICATED ACCESSORIES Remote control
PRODUCT TYPE: Pellet stove for hot air production with forced convection.
Optional.
MATERIALS: Steel: structure Cast iron: grate, door, front elements, top Alutec®: combustion chamber Ceramic: sides
Modem GSM modem for Active. Allows remote connection with GSM mobile phone.
External thermostat interface kW 8
91,7 %
Ø cm 8
kg 140
Air - Comfort Air®
Power board to be inserted into the mother board. Makes it possible to use a remote thermostat.
cm 52 x 53 x 105,7
STAR Comfort Air PRODUCT TYPE: Pellet stove for hot air production with forced convection. Possibility of ducting the air into other rooms - up to 8 metres with the help of MCZ Comfort Air® technology.
Pellet auger for remote hopper To feed the pellet stove from a remote hopper. Length 2 m
MATERIALS: Steel: structure Cast iron: grate, door, front elements, top Alutec®: combustion chamber Ceramic: sides
Electronic control - pellet level sensors for remote hopper
Hydro
Hydro
Control unit complete with brackets for remote hoppers.
Comfort Air® accessories kW 8
91,7 %
Ø cm 8
kg 140
cm 52 x 53 x 105,7
CLADDINGS
TUBE Comfort Air
>>>
To build a Comfort Air® channelling system > p. 45
Comfort Air®
40A11012
40A11013
515,00
220,00
PRODUCT TYPE: Pellet stove for hot air production with forced convection. Possibility of ducting the air into other rooms - up to 8 metres - with the help of MCZ Comfort Air® technology. Separately controlled dual fan, top air outlet. MATERIALS: Steel: structure, side Metal: painted metal cladding Cast iron: grate Aluminium: top Alutec®: combustion chamber
Structure + Black metal_303
7112001
3.120,00
Structure + Bronze metal_305
7112005
3.120,00
SUPPLIED AS STANDARD WITH MAX remote control
DEDICATED ACCESSORIES 40160428
Modem GSM modem for Active. Allows remote connection with GSM mobile phone.
kW 8
91,7 %
Ø cm 8
kg 130
cm 52 x 61 x 119 Comfort Air® accessories
STAR Hydro
>>>
To build a Comfort Air® channelling system > p. 45
PRODUCT TYPE: Pellet stove for the production of hot air/convective heat and hot water for central heating. MATERIALS: Steel: structure Cast iron: grate, door, front elements, top Ceramic: sides
kW 11,6
91,5 %
Ø cm 8
kg 175
cm 52 x 53 x 105,7
kW 10
18
19
Comfort Air®
480,00
PELLET > STOVES
PELLET > STOVES €
DESCRIPTION/CODE
€
PELLET
DESCRIPTION/CODE CLADDINGS Black metal_303
7108215
2.650,00
Bordeaux metal_304
7108216
2.650,00
Silver metal_313
7108217
2.650,00
SUPPLIED AS STANDARD WITH Remote control
DEDICATED ACCESSORIES Modem
40160428
480,00
GSM modem for Active. Allows remote connection with GSM mobile phone.
GEA Air PRODUCT TYPE: Pellet stove for hot air production with forced convection. MATERIALS: Steel: structure Metal: painted sides Cast iron: grate, door, front elements Ceramic: top Alutec®: combustion chamber
WHILE STOCKS LAST kW 8,7
91 %
Ø cm 8
kg 120
cm 49 x 50 x 103
STRUCTURE 7108068
Air
2.430,00
STRUCTURE
SAGAR Air PRODUCT TYPE: Pellet stove for hot air production with forced convection.
CLADDINGS Bordeaux ceramic_105
367131
540,00
Red ceramic_108
367132
580,00
Salt and pepper ceramic_110
367133
540,00
Sand ceramic_109
367134
540,00
MATERIALS: Steel: structure Cast iron: grate, door, front diffuser Ceramic/Soapstone: top Alutec®: combustion chamber
Air
7111025
1.770,00
White ceramic_102
6909036
290,00
White leaves ceramic_103
6909037
360,00
Soapstone_202
6909038
520,00
40160428
480,00
CLADDINGS
SUPPLIED AS STANDARD WITH Remote control MAX
SUPPLIED AS STANDARD WITH kW 8
Remote control
91,7 %
Ø cm 8
kg 140
cm 52,2 x 50,8 x 108
DEDICATED ACCESSORIES Modem
DEDICATED ACCESSORIES
SOLAR Air
Modem
PRODUCT TYPE: Pellet stove for hot air production with forced convection.
40160428
480,00
GSM modem for Active. Allows remote connection with GSM mobile phone.
GSM modem for Active. Allows remote connection with GSM mobile phone.
MATERIALS: Steel: structure Cast iron: grate, door, front elements Ceramic: top, sides Alutec®: combustion chamber
WHILE STOCKS LAST kW 8,7
91 %
Ø cm 8
kg 120
cm 49,8 x 50 x 103
20
21
PELLET > STOVES
PELLET > STOVES €
DESCRIPTION/CODE
€
PELLET
DESCRIPTION/CODE
STRUCTURE
TOBA Air MATERIALS: Steel: structure Cast iron: grate, door Ceramic/Soapstone: front frame Alutec®: combustion chamber
kW 8
91,7 %
7111026
Air
PRODUCT TYPE: Pellet stove for hot air production with forced convection.
Ø cm 8
®
7111030
Comfort Air
2.160,00 2.380,00
CLADDINGS
kg 140
cm 52,3 x 51,2 x 111
White ceramic_102
6909040
340,00
Soapstone_202
6909042
650,00
Bordeaux ceramic_105
6909048
340,00
Black ceramic_107
6909049
340,00
Sandstone_248
6911048
780,00
SUPPLIED AS STANDARD WITH
STRUCTURE
NIMA Comfort Air PRODUCT TYPE: Pellet stove for hot air production with forced convection. Possibility of ducting the air into other rooms - up to 8 metres - with the help of MCZ Comfort Air® technology. Separately controlled dual fan, top air outlet.
Comfort Air®
7111027
2.780,00
White ceramic_102
6909043
280,00
Warm grey ceramic_113
6909045
280,00
Bordeaux ceramic_105
6909044
280,00
Serpentino_240
6911044
385,00
Sandstone_248
6911046
400,00
40160428
480,00
CLADDINGS
MATERIALS: Steel: structure Cast iron: grate, door Alutec®: combustion chamber Ceramic: sides
SUPPLIED AS STANDARD WITH kW 11,5
90,2 %
Ø cm 8
kg 160
Remote control MAX
cm 51,5 x 50,8 x 115,2
Remote control MAX
TOBA Comfort Air
DEDICATED ACCESSORIES
PRODUCT TYPE: Pellet stove for hot air production with forced convection. Possibility of ducting the air into other rooms - up to 8 metres with the help of MCZ Comfort Air® technology.
91,7 %
Ø cm 8
40160428
Modem
GSM modem for Active. Allows remote connection with GSM mobile phone.
480,00
GSM modem for Active. Allows remote connection with GSM mobile phone.
Comfort Air® accessories
MATERIALS: Steel: structure Cast iron: grate, door Ceramic/Soapstone: front frame Alutec®: combustion chamber
kW 8
Modem
DEDICATED ACCESSORIES
Comfort Air® accessories
>>> kg 140
To build a Comfort Air® channelling system > p. 45
Comfort Air®
>>>
To build a Comfort Air® channelling system > p. 45
cm 52,3 x 51,2 x 111
22
23
Comfort Air®
PELLET > STOVES
PELLET > STOVES €
DESCRIPTION/CODE
STRUCTURE
STRUCTURE Air
7111023
2.230,00
Air
7111021
2.260,00
Comfort Air®
7111024
2.570,00
Comfort Air®
7111022
2.590,00
Hydro 15 (15 kW)
7110010
2.950,00
Hydro 15 (15 kW)
7110009
2.980,00
Hydro 15 - High efficiency pump
7110018
3.055,00
Hydro 15 - High efficiency pump
7110016
3.085,00
Hydro 22 (22 kW)
7110007
3.430,00
Hydro 22 (22 kW)
7110006
3.460,00
Hydro 22 - High efficiency pump
7110019
3.535,00
Hydro 22 - High efficiency pump
7110017
3.565,00
Hydro 22 with exchanger
7110014
3.770,00
Hydro 22 with exchanger
7110013
3.800,00
White metal_302
6909016
125,00
Salt and pepper ceramic_110
6909010
360,00
Dark metal_308
6909017
125,00
Bordeaux ceramic_105
6909011
360,00
Silver metal_313
6909018
125,00
Old amber ceramic_111
6909012
360,00
Bordeaux metal_304
6909019
125,00
40160428
480,00
CLADDINGS
MUSA Air PRODUCT TYPE: Pellet stove for hot air production with forced convection.
CLADDINGS
Remote control MAX
SUITE Air PRODUCT TYPE: Pellet stove for hot air production with forced convection.
SUPPLIED AS STANDARD WITH
MATERIALS: Steel: structure Metal: painted sides Cast iron: grate, door, front elements, top Alutec®: combustion chamber
MATERIALS: Steel: structure Cast iron: grate, door, front diffuser Alutec®: combustion chamber Ceramic: sides, top, front panel
Air - Comfort Air®
SUPPLIED AS STANDARD WITH Remote control MAX
Modem 40160428
Modem 91,7 %
Ø cm 8
kg 160
GSM modem for Active. Allows remote connection with GSM mobile phone.
480,00
GSM modem for Active. Allows remote connection with GSM mobile phone.
cm 50,2 x 55,9 x 109,3
kW 9,5
91,7 %
Ø cm 8
kg 160
cm 57,8 x 55,9 x 115 Comfort Air® accessories
Comfort Air® accessories
>>> MUSA Comfort Air
To build a Comfort Air® channelling system > p. 45
Conduit for additional hopper
PRODUCT TYPE: Pellet stove for hot air production with forced convection. Possibility of ducting the air into other rooms - up to 8 metres with the help of MCZ Comfort Air® technology. MATERIALS: Steel: structure Metal: painted sides Cast iron: grate, door, front elements, top Alutec®: combustion chamber
Terminal check valve+ pressure gauge
ACS 110 storage boiler 110 l capacity Attention: ONLY FOR HYDRO 22 MODELS with exchanger
kW 11,5
90,2 %
Ø cm 8
kg 160
cm 50,2 x 55,9 x 109,3
2.5 kW thermostat-controlled electrical resistance kit for cylinder
Pellet auger for remote hopper To feed the pellet stove from a remote hopper. Length 2 m
MUSA Hydro 15/22 PRODUCT TYPE: Pellet stove for the production of hot air/convective heat and hot water for central heating. Hydro 22 comes with a front hot air vent which comes on automatically when the stove is hot. The version with an exchanger for DHW production is also available. Two versions with different power ratings (15/22 kW).
92,1% 92,5%
Ø cm 8
kg 190
>>>
Comfort Air®
Hydro
Hydro
Hydro
Hydro
Hydro
4009019
4009020
7311231
40A11226
40A11012
20,00
SUITE Comfort Air
20,00
PRODUCT TYPE: Pellet stove for hot air production with forced convection. Possibility of ducting the air into other rooms - up to 8 metres with the help of MCZ Comfort Air® technology.
1.475,00
170,00
Wireless timed thermostat
cm 50,2 x 55,9 x 109,3
MATERIALS: Steel: structure Cast iron: grate, door, front diffuser Alutec®: combustion chamber Ceramic: sides, top, front panel
kW 11,5
Ø cm 8
kg 160
cm 57,8 x 55,9 x 115
SUITE Hydro 15/22 Hydro
40A11013
220,00
Hydro
4011037
78,00
PRODUCT TYPE: Pellet stove for the production of hot air/convective heat and hot water for central heating. Hydro 22 comes with a front hot air vent which comes on automatically when the stove is hot. The version with an exchanger for DHW production is also available. Two versions with different power ratings (15/22 kW). MATERIALS: Steel: structure Cast iron: grate, door, front diffuser Ceramic: sides, top, front panel
92,1% 92,5%
Ø cm 8
kg 190
Hydro
4009019
20,00
Terminal check valve + pressure gauge
Hydro
4009020
20,00
ACS 110 storage boiler
Hydro
7311231
1.475,00
2.5 kW thermostat-controlled electrical resistance kit for cylinder
Hydro
40A11226
170,00
Pellet auger for remote hopper
Hydro
40A11012
515,00
Hydro
40A11013
220,00
Hydro
4011037
78,00
Electronic control - pellet level sensors for remote hopper Control unit complete with brackets for remote hoppers.
Wireless timed thermostat Designed for connection to MCZ timed thermostats. 4 time brackets per day. Attention: ONLY FOR HYDRO MODELS
cm 57,8 x 55,9 x 115
kW 13 kW 18 24
Comfort Air®
Conduit for additional hopper
To feed the pellet stove from a remote hopper. Length 2 m
kW 15,4 kW 22,3
kW 13 kW 18
90,2 %
To build a Comfort Air® channelling system > p. 45
110 l capacity Attention: ONLY FOR HYDRO 22 MODELS with exchanger
515,00
Control unit complete with brackets for remote hoppers.
Designed for connection to MCZ timed thermostats. 4 time brackets per day. Attention: ONLY FOR HYDRO MODELS
MATERIALS: Steel: structure Metal: painted sides Cast iron: grate, door, front elements, top
kW 15,4 kW 22,3
Electronic control - pellet level sensors for remote hopper
Air - Comfort Air®
DEDICATED ACCESSORIES
DEDICATED ACCESSORIES kW 9,5
€
25
PELLET
DESCRIPTION/CODE
PELLET > STOVES
PELLET > STOVES €
DESCRIPTION/CODE
€
CLADDINGS
STRUCTURE Air
7111021
2.260,00
Black metal_303
7109012
3.650,00
Comfort Air®
7111022
2.590,00
Silver metal_313
7109013
3.650,00
Hydro 15 (15 kW)
7110009
2.980,00
Bordeaux metal_304
7109014
3.650,00
Hydro 15 - High efficiency pump
7110016
3.085,00
Hydro 22 (22 kW)
7110006
3.460,00
Hydro 22 - High efficiency pump
7110017
3.565,00
Hydro 22 with exchanger
7110013
3.800,00
Black metal_303
With exchanger
7109009
3.990,00
Silver metal_313
With exchanger
7109010
3.990,00
Bordeaux metal_304
With exchanger
7109011
3.990,00
Hydro
7311231
1.475,00
2.5 kW thermostat-controlled electrical resistance kit for cylinder
Hydro
1451104200
170,00
Pellet auger for remote hopper
Hydro
40A11012
515,00
Hydro
40A11013
220,00
DEDICATED ACCESSORIES CLADDINGS
CLUB Air PRODUCT TYPE: Pellet stove for hot air production with forced convection. MATERIALS: Steel: structure Cast iron: grate, door, front diffuser Alutec®: combustion chamber Ceramic: sides, top, front panel
DHW 110 storage cylinder White ceramic_102
6909013
360,00
Bordeaux ceramic_105
6909014
360,00
Sand ceramic_109
6909015
360,00
Black ceramic_107
6909030
360,00
Serpentino_240
6911043
1.150,00
SUPPLIED AS STANDARD WITH Remote control MAX
Air - Comfort Air®
DEDICATED ACCESSORIES kW 9,5
91,7 %
Ø cm 8
kg 160
cm 57,8 x 55,9 x 115
40160428
Modem
110 litre capacity
ATHOS Hydro PRODUCT TYPE: Pellet stove for the production of hot air/convective heat and hot water for central heating. Featuring a fan for the distribution of the hot air within the room. HYDRO: production of heating hot water and hot air (not ductable) HYDRO W/HEAT EXCHANGER: production of heating hot water, hot air (not ductable) and domestic hot water. MATERIALS: Steel: structure Metal: painted sides Cast iron: door, front elements, grate Ceramic: top (Black ceramic_107)
To feed the pellet stove from a remote hopper. Length 2 m
Electronic control - pellet level sensors for remote hopper Control unit complete with brackets for remote hoppers.
480,00
GSM modem for Active. Allows remote connection with GSM mobile phone.
= WHILE STOCKS LAST ®
Comfort Air accessories
>>>
CLUB Comfort Air
To build a Comfort Air® channelling system > p. 45
MATERIALS: Steel: structure Cast iron: grate, door, front diffuser Alutec®: combustion chamber Ceramic: sides, top, front panel
Conduit for additional hopper
Terminal check valve+ pressure gauge
ACS 110 storage boiler
90,2 %
Ø cm 8
kW 23,7
kW 16,2
92 %
Ø cm 8
kg 200
®
cm 57,8 x 58,2 x 112
PelletBox
PRODUCT TYPE: Pellet stove for hot air production with forced convection. Possibility of ducting the air into other rooms - up to 8 metres with the help of MCZ Comfort Air® technology.
kW 11,5
Comfort Air®
kg 160
cm 57,8 x 55,9 x 115
110 l capacity Attention: ONLY FOR HYDRO 22 MODELS with exchanger
2.5 kW thermostat-controlled electrical resistance kit for cylinder
Hydro
Hydro
4009019
4009020
20,00
STRUCTURE Hydro
360051
3.650,00
Hydro with exchanger
360062
3.990,00
Black ceramic_107
367130
370,00
Bordeaux ceramic_105
367128
370,00
Desert ceramic_106
367129
370,00
Salt and pepper ceramic_110
367127
370,00
20,00
CLADDINGS
Hydro
Hydro
7311231
40A11226
1.475,00
170,00
DEDICATED ACCESSORIES Hydro
7311231
2.5 kW thermostat-controlled electrical resistance kit for cylinder
Hydro
1451104200
170,00
Pellet auger for remote hopper
Hydro
40A11012
515,00
Hydro
40A11013
220,00
DHW 110 storage cylinder 110 litre capacity
CLUB Hydro 15/22
Pellet auger for remote hopper
PRODUCT TYPE: Pellet stove for the production of hot air/convective heat and hot water for central heating. Hydro 22 comes with a front hot air vent which comes on automatically when the stove is hot. The version with an exchanger for DHW production is also available. Two versions with different power ratings (15/22 kW). MATERIALS: Steel: structure Cast iron: grate, door, front diffuser Ceramic: sides, top, front panel
kW 15,4 kW 22,3
92,1% 92,5%
Ø cm 8
To feed the pellet stove from a remote hopper. Length 2 m
Electronic control - pellet level sensors for remote hopper
40A11012
515,00
NOVA Hydro Hydro
40A11013
220,00
Control unit complete with brackets for remote hoppers.
Wireless timed thermostat Designed for connection to MCZ timed thermostats. 4 time brackets per day. Attention: ONLY FOR HYDRO MODELS
kg 190
Hydro
Hydro
4011037
78,00
PRODUCT TYPE: Pellet stove for the production of hot air/convective heat and hot water for central heating. Featuring a fan for the distribution of the hot air within the room. HYDRO: production of heating hot water and hot air (not ductable) HYDRO W/HEAT EXCHANGER: production of heating hot water, hot air (not ductable) and domestic hot water. MATERIALS: Steel: structure Cast iron: door, grate Ceramic: sides, top, front panels
To feed the pellet stove from a remote hopper. Length 2 m
Electronic control - pellet level sensors for remote hopper Control unit complete with brackets for remote hoppers.
cm 57,8 x 55,9 x 115 kW 23,7
kW 16,2 ®
92 %
Ø cm 8
kg 200
= WHILE STOCKS LAST
cm 55 x 55 x 113,5
PelletBox
kW 13 kW 18 26
1.475,00
27
PELLET
DESCRIPTION/CODE
PELLET > STOVES
PELLET > STOVES €
DESCRIPTION/CODE
€
PELLET
DESCRIPTION/CODE STRUCTURE Hydro
360051
3.650,00
Hydro with exchanger
360062
3.990,00
Bordeaux ceramic_105
367123
370,00
Desert ceramic_106
367124
370,00
Salt and pepper ceramic_110
367125
370,00
Sand ceramic_109
367126
370,00
CLADDINGS
DEDICATED ACCESSORIES Hydro
7311231
2.5 kW thermostat-controlled electrical resistance kit for cylinder
Hydro
1451104200
170,00
Pellet auger for remote hopper
Hydro
40A11012
515,00
Hydro
40A11013
220,00
DHW 110 storage cylinder 110 litre capacity
POLAR Hydro PRODUCT TYPE: Pellet stove for the production of hot air/convective heat and hot water for central heating. Featuring a fan for the distribution of the hot air within the room. HYDRO: production of heating hot water and hot air (not ductable) HYDRO W/HEAT EXCHANGER: production of heating hot water, hot air (not ductable) and domestic hot water. MATERIALS: Steel: structure Cast iron: door, grate Ceramic: sides, top, front panels
kW 23,7
kW 16,2
92 %
Ø cm 8
kg 200
®
To feed the pellet stove from a remote hopper. Length 2 m
Electronic control - pellet level sensors for remote hopper
1.475,00
Control unit complete with brackets for remote hoppers.
= WHILE STOCKS LAST
cm 55 x 55 x 113,5
PelletBox
VERSIONS Kama silver
Aluminium metal_315
7111028
2.900,00
STRUCTURE
NASIK Air
Air
PRODUCT TYPE: Pellet stove for hot air production with forced convection.
SUPPLIED AS STANDARD WITH
MATERIALS: Steel: structure Cast iron: grate Alutec®: combustion chamber White lacquered wood or solid oak: base
Remote control MAX
GSM modem for Active. Allows remote connection with GSM mobile phone.
2.850,00
BASE Lacquered white
Wood white_401
6909047
340,00
Oak
Wood oak_402
6909046
340,00
40160428
480,00
SUPPLIED AS STANDARD WITH
DEDICATED ACCESSORIES Modem
7111029
Remote control MAX 40160428
480,00 kW 6,6
88,9 %
Ø cm 8
kg 130
cm 74 x 48,5 x 89,1
DEDICATED ACCESSORIES Modem GSM modem for Active. Allows remote connection with GSM mobile phone.
KAMA Air PRODUCT TYPE: Pellet stove for hot air production with forced convection. MATERIALS: Steel: structure Cast iron: grate Alutec®: combustion chamber Silver coloured steel: top, legs
kW 6,6
88,9 %
Ø cm 8
kg 130
cm 74,5 x 49 x 93,5
28
29
PELLET > MODULO
PELLET > MODULO €
DESCRIPTION/CODE
CITY PELLET
€
REFLEX PELLET Modulo pellet structure City pellet cladding (as in photo)
Absolute Black granite_201
615004
3.120,00
Modulo pellet structure
615004
3.120,00
616016
1.600,00
Reflex stainless steel pellet cladding (as in photo) Inox metal_310
616008
710,00
Total
Total
4.720,00
SUPPLIED AS STANDARD WITH
Modulo pellet structure
Remote control MAX
Reflex rust colour pellet cladding
Copper metal_309
3.830,00 615004
3.120,00
616026
710,00
Total
3.830,00
SUPPLIED AS STANDARD WITH
DEDICATED ACCESSORIES 40160428
Modem
Remote control MAX
480,00
GSM modem for Active. Allows remote connection with GSM mobile phone.
MODULO CITY
MODULO REFLEX
PRODUCT TYPE: Fireplace-stove with steel structure for hot air production and heat convection/forced convection. Pellet- or wood-burning available.
PRODUCT TYPE: Fireplace-stove with steel structure for hot air production and heat convection/forced convection. Pellet- or wood-burning available.
MATERIALS: Steel: structure Absolute Black_201: front cladding Alutec®: combustion chamber
MATERIALS: Steel: structure Copper metal_309/Stainless steel metal_310: front cladding Alutec®: combustion chamber
DEDICATED ACCESSORIES 40160428
Modem
kW 8,7
85%
Ø cm 8
kg 270
kW 8,7
cm 90 x 51,5 x 150
85%
Ø cm 8
kg 210
cm 90 x 51,5 x 150
CLASS PELLET
SQUARE PELLET Modulo pellet structure Class white pellet cladding
Cream ceramic_104
615004
3.120,00
616028
975,00
Total
Modulo pellet structure Class bordeaux pellet cladding
Bordeaux ceramic_105
Modulo pellet structure Square soapstone cladding
615004
3.120,00
616029
975,00
Modem
MODULO SQUARE 40160428
480,00 PRODUCT TYPE: Fireplace-stove with steel structure for hot air production and heat convection/forced convection. Pellet- or wood-burning available. MATERIALS: Steel: structure Soapstone_202: front cladding Alutec®: combustion chamber
kW 8,7 kW 8,7
85%
Ø cm 8
kg 210
85%
Ø cm 8
kg 280
cm 90 x 51,5 x 150
cm 90 x 51,5 x 150
30
4.720,00
DEDICATED ACCESSORIES
DEDICATED ACCESSORIES
MATERIALS: Steel: structure Ceramic (Cream ceramic_104/ Bordeaux ceramic_105): front cladding Alutec®: combustion chamber
1.600,00
4.095,00
GSM modem for Active. Allows remote connection with GSM mobile phone.
GSM modem for Active. Allows remote connection with GSM mobile phone.
616011
Remote control MAX
Remote control MAX
PRODUCT TYPE: Fireplace-stove with steel structure for hot air production and forced convection. Only pellet-burning available.
3.120,00
SUPPLIED AS STANDARD WITH
SUPPLIED AS STANDARD WITH
Modem
Soapstone_202
615004
Total
4.095,00
Total
MODULO CLASS
480,00
GSM modem for Active. Allows remote connection with GSM mobile phone.
31
40160428
480,00
PELLET
DESCRIPTION/CODE
PELLET > MODULO
MODULO SQUARE €
PELLET
DESCRIPTION/CODE VERTIGO PELLET Modulo pellet structure
615004
3.120,00
Vertigo stripes metal pellet cladding (as in photo) Stripes metal_307
616027
950,00
Total
4.070,00
SUPPLIED AS STANDARD WITH Remote control MAX
DEDICATED ACCESSORIES 40160428
Modem
480,00
GSM modem for Active. Allows remote connection with GSM mobile phone.
MODULO VERTIGO PRODUCT TYPE: Fireplace-stove with steel structure for hot air production and heat convection/forced convection. Pellet- or wood-burning available. MATERIALS: Steel: structure Stripes metal_307: front cladding Alutec®: combustion chamber
kW 8,7
85%
Ø cm 8
kg 210
cm 90 x 51,5 x 150
CUSTOMISABLE MODULO PELLET Modulo pellet structure Customisable pellet frame
Black metal_303
615004
3.120,00
616014
270,00
Total
3.390,00
SUPPLIED AS STANDARD WITH Remote control MAX
DEDICATED ACCESSORIES Modem
40160428
480,00
GSM modem for Active. Allows remote connection with GSM mobile phone.
CUSTOMISABLE FRAME PRODUCT TYPE: Fireplace-stove with steel structure for hot air production and heat convection/forced convection. Pellet- or wood-burning available. The front cladding is customisable. MATERIALS: Black metal_303: structure Alutec®: combustion chamber
kW 8,7
85%
Ø cm 8
kg 200
cm 90 x 51,5 x 150
32
33
PELLET > PANORAMA
PELLET > PANORAMA €
DESCRIPTION/CODE
€
PELLET
DESCRIPTION/CODE STRUCTURE 615003
Box Panorama Air
616021
Finishing elements Total
2.630,00 190,00 2.820,00
SUPPLIED AS STANDARD WITH Remote control
DEDICATED ACCESSORIES 40160428
Modem
480,00
GSM modem for Active. Allows remote connection with GSM mobile phone.
PANORAMA PRODUCT TYPE: Pellet stand-alone glass-fronted fireplace with Active System technology. Hot air comes out of the wide upper grate. Maintenance is made easier by removable side panels. You can monitor operation from a control panel located near the tank. MATERIALS: Steel: structure Cast iron: grate Alutec®: combustion chamber
kW 8,5
91,7 %
Ø cm 8
WHILE STOCKS LAST
kg 140
cm 74 x 57,5 x 52,8
STRUCTURE/CLADDING Box Panorama Air Mono steel cladding
Black metal_303
615003
2.630,00
616023
580,00
Total
3.210,00
STRUCTURE/CLADDING
ZEN
Box Panorama Air
PRODUCT TYPE: Pellet stand-alone glass-fronted fireplace with Active System technology. The support consists of two twin elements with a different finish.
Remote control
Black metal_303 Inox metal_310
615003
2.630,00
616022
800,00
Total
MATERIALS: Steel: structure Cast iron: grate Alutec®: combustion chamber Brushed steel: part of the support
SUPPLIED AS STANDARD WITH
Zen steel cladding
3.430,00
SUPPLIED AS STANDARD WITH Remote control
DEDICATED ACCESSORIES Modem
40160428
GSM modem for Active. Allows remote connection with GSM mobile phone.
480,00
kW 8,5
91,7 %
Ø cm 8
kg 160
cm 90 x 58 x 90
DEDICATED ACCESSORIES Modem
40160428
GSM modem for Active. Allows remote connection with GSM mobile phone.
MONO PRODUCT TYPE: Pellet stand-alone glass-fronted fireplace with Active System technology. MATERIALS: Steel: structure Cast iron: grate Alutec®: combustion chamber
kW 8,5
91,7 %
Ø cm 8
WHILE STOCKS LAST
kg 160
WHILE STOCKS LAST
cm 75 x 58 x 104
34
35
480,00
PELLET > GLASS-FRONTED FIREPLACES > VIVO
PELLET > GLASS-FRONTED FIREPLACES > VIVO €
DESCRIPTION/CODE
VERSIONS
VERSIONS Black metal_303
5012004
2.480,00
SLIM Comfort Air® kit
4012008
500,00
Black metal_303
5012004
2.480,00
BASIC Comfort Air® kit
4012007
300,00
ø 6 cm
m
ø
c 10
Multi 12
m
0c ø1
-2 x Multi 12 outlets -2 x ø 10 cm - L=1.5 m pipes -2 x ø 6 cm pipes -Motor inspection hatches -2 fan units -2 x ø 60 mm clamps -2 x ø 100 mm clamps
Multi 20
-2 x Multi 20 outlets -2 x ø 10 cm - L=1.5 m pipes -2 fan units -4 clamps -2 brackets TOTAL
TOTAL
2.980,00
2.780,00
SUPPLIED AS STANDARD WITH MAX remote control
SUPPLIED AS STANDARD WITH MAX remote control "Blade" convection grille x2
VIVO 80 Pellet SLIM Comfort Air
VIVO 80 Pellet BASIC Comfort Air
"Blade" convection grille x2
PRODUCT TYPE: Pellet glass-fronted fireplace for hot air production and forced heat convection. Integrated Comfort Air® hood kit; possibility of ducting the air elsewhere with optional Comfort Air® accessories. MATERIALS: Steel: structure Cast iron: grate Alutec®: combustion chamber
PRODUCT TYPE: Pellet glass-fronted fireplace for hot air production and forced heat convection. Integrated Comfort Air® hood kit; possibility of ducting the air elsewhere with optional Comfort Air® accessories. MATERIALS: Steel: structure Cast iron: grate Alutec®: combustion chamber
Passe-partout frame 4 sides.
Passe-partout frame 4 sides.
DEDICATED ACCESSORIES
40160428
Modem 91 %
Ø cm 8
kg 150
kW 10,5 4012009
4012009
190,00
5012003
2.950,00
Hydro
4011037
78,00
Terminal check valve+ pressure gauge
Hydro
4009020
20,00
Pellet auger for remote hopper
480,00
cm 78,5 x 55 x 68 Support Optional.
480,00
GSM modem for Active. Allows remote connection with GSM mobile phone.
GSM modem for Active. Allows remote connection with GSM mobile phone.
kW 10,5
40160428
Modem
DEDICATED ACCESSORIES
91 %
Ø cm 8
kg 150
Support Optional.
cm 78,5 x 55 x 68
190,00 Comfort Air® accessories
>>> FLIP ventilation outlet Complete with two lamps and air humidifier.
White glass/1 pc.
FLOAT ventilation outlet Complete with two lamps and air humidifier.
White glass/white frame/1 pc. White glass/black frame/1 pc.
4012017
To build a Comfort Air® channelling system > p. 45
Comfort Air®
190,00
STRUCTURE 4012018 4012019
Black metal_303
210,00 210,00
SUPPLIED AS STANDARD WITH Passe-partout frame 4 sides.
White/1 pc. GHOST ventilation outlet Complete with 1 lamp and air humidifier. Black/1 pc.
4012020 4012021
210,00 210,00
DEDICATED ACCESSORIES Comfort Air® accessories
>>>
To build a Comfort Air® channelling system > p. 45
Comfort Air®
Wireless timed thermostat Designed for connection to MCZ timed thermostats. 4 time brackets per day.
VIVO 80 Pellet Hydro Hydro
40A11012
515,00
PRODUCT TYPE: Pellet glass-fronted fireplace for the production of hot water for central heating with expansion vessel, EC pump, safety valve, degasser, filler cock.
To feed the pellet stove from a remote hopper. Length 2m
MATERIALS: Steel: structure Alutec®: combustion chamber
Electronic control - pellet level sen- Hydro sors for remote hopper
40A11013
220,00
4012009
190,00
Control unit complete with brackets for remote hoppers.
Support Optional. kW 16,7
90,1%
Ø cm 8
kg 160
cm 78,5 x 60 x 64,9
kW 14
36
37
PELLET
€
DESCRIPTION/CODE
PELLET > INSERTS DESCRIPTION/CODE
€
DESCRIPTION/CODE
€
VERSION
VERSION FOR VIVO 80 PELLET C/AIR Slim Basic - HYDRO Wall
Bronze metal_305
6212001
850,00
Wall
Grey metal_306
6212002
850,00
5012005
Black metal_303
2.340,00
SUPPLIED AS STANDARD WITH MAX remote control
"Blade" convection grille
DEDICATED ACCESSORIES 52,00 54,00
Frame 4 sides black
4012012
125,00
Modem
40160428
480,00
Support Optional.
4012009
190,00
Black metal_303
5012002
2.490,00
25x10 cm
FRAME
BOXTHERM 60 Pellet
PRODUCT TYPE: Fireplace/wall mounted frame.
PRODUCT TYPE: Pellet insert for hot air production and forced heat convection with incorporated drawer tank. Front air outlet grille.
MATERIALS: Powder-coated steel Bronze metal_305/Gray metal_306
kg 19
MATERIALS: Steel: structure Alutec®: combustion chamber
Vivo 80 pellet - cm 120,4 x 6,2 x 90
White Brass covered
40160001 40160002
Adjustable hood ventilation outlet - with cap
GSM modem for Active. Allows remote connection with GSM mobile phone.
VERSION FOR VIVO 80 PELLET C/AIR Slim Basic - HYDRO Wall
6212003
1.250,00 kW 6
91,5 %
Ø cm 8
kg 80
cm 59 x 45 x 55
VERSION
SUPPLIED AS STANDARD WITH MAX remote control
MODUS PRODUCT TYPE: Fireplace/wall mounted frame. MATERIALS: Sandblasted grey stone_239
"Blade" convection grille kg 55
Vivo 80 pellet - cm 120 x 4 x 90
VERSION FOR VIVO 80 PELLET C/AIR Slim Basic - HYDRO Wall
6212004
DEDICATED ACCESSORIES
1.150,00
White Brass covered
40160001 40160002
52,00 54,00
Frame 4 sides black
4012004
110,00
Modem
40160428
480,00
4012009
190,00
Adjustable hood ventilation outlet - with cap 25x10 cm
BOXTHERM 70 Pellet PRODUCT TYPE: Pellet insert for hot air production and forced heat convection with incorporated drawer tank. Front air outlet grille. MATERIALS: Steel: structure Alutec®: combustion chamber
GSM modem for Active. Allows remote connection with GSM mobile phone.
Support Optional. kW 8,8
93,5 %
Ø cm 8
kg 120
cm 70 x 55 x 60
PRIME PRODUCT TYPE: Fireplace/wall mounted frame. MATERIALS: Slate marble_203
kg 33
Vivo 80 pellet - cm 120 x 4 x 90
38
39
PELLET
PELLET > VIVO > FIREPLACES
BOXTHERM
PELLET > INSERTS €
PELLET
DESCRIPTION/CODE VERSION 50511
Black metal_303
3.100,00
DEDICATED ACCESSORIES 4008040
21,00
40160001 40160002
52,00 54,00
Frame 4 sides black
4008007
125,00
Modem
40160428
480,00
Ventilation grille
Adjustable hood ventilation outlet - with cap 25x10 cm
POWERBOX Compact
GSM modem for Active. Allows remote connection with GSM mobile phone.
PRODUCT TYPE: Pellet insert for hot air production and heat convection with incorporated drawer tank.
SUPPLIED AS STANDARD WITH
MATERIALS: Steel: structure Alutec®: combustion chamber
kW 8,5
91,7 %
Ø cm 8
White Brass covered
Remote control
kg 120
cm 74,1 x 61,2 x 62,2
WHILE STOCKS LAST
VERSION 50512
Black metal_303
3.200,00
DEDICATED ACCESSORIES 4008040
21,00
40160001 40160002
52,00 54,00
Frame 4 sides black
4008007
125,00
Modem
40160428
480,00
Ventilation grille
Adjustable hood ventilation outlet - with cap 25x10 cm
POWERBOX Link
GSM modem for Active. Allows remote connection with GSM mobile phone.
PRODUCT TYPE: Pellet insert for hot air production and heat convection. The pellets are loaded through a top-loading door connected to a Powerbox by a flexible pipe.
91,7 %
Ø cm 8
SUPPLIED AS STANDARD WITH Remote control
MATERIALS: Steel: structure Alutec®: combustion chamber
kW 8,5
White Brass covered
kg 120
cm 74,1 x 61,2 x 62,2
WHILE STOCKS LAST
40
41
