Cereplas™ Esters: Pvc Formulation Performance Comparison

Transcript

CEREPLAS™ ESTERS: PVC FORMULATION PERFORMANCE COMPARISON www.ineosenterprises.com Z.I. Baleycourt, 55103 Verdun, France FORMULATION: LOW FORMULATION: HIGH K70 resin 100 phr Ca. Stearate 0.2 phr K70 resin 100 phr Ca. Stearate 0.2 phr Plasticiser 50 phr Zn. Stearate 0.2 phr Plasticiser 80 phr Zn. Stearate 0.2 phr ESBO 3 phr ESBO 3 phr DINP DOA 100XS OTM OTM STAB I L8TM DINP DOA 100XS OTM OTM STAB I L8TM 81 76 83 89 89 89 61 56 62 63 64 64 TENSILE STRENGTH [MPa] 18.75 15.09 20.11 19.57 18.60 17.51 12.61 9.72 13.32 12.67 12.93 12.22 100% MODULUS [MPa] 9.94 7.35 10.91 13.28 12.73 11.47 4.70 3.53 4.80 5.75 5.92 5.28 ELONGATION [%] 300 275 330 290 240 245 385 365 380 335 330 335 TEAR STRENGTH [kN/m] 77.90 49.46 75.33 81.90 83.80 70.19 40.50 24.16 39.85 44.28 47.46 40.08 COLD FLEX [˚C] -22.5 -47 -21.5 -12.5 -11.5 -22.5 -46 -69 -45.5 -37.5 -35.5 -46.5 FUSION TORQUE [Nm] 4.5 3.9 4.4 5.4 5.4 5.2 2.5 2.1 2.5 3.1 2.9 2.6 DYNAMIC STABILITY [MINS] 20.5 20.4 24.8 19.4 23.3 21 23.9 30 35.6 29.5 34.8 33.9 HARDNESS 7 DAY, 15 SEC [SHORE A] AGED PROPERTIES (AFTER 1 WEEK @ 60˚C) HARDNESS 7 DAY, 15 SEC [SHORE A] 80 75 82 88 88 88 58 54 60 62 63 62 TENSILE STRENGTH [%] +0.4 -7.3 -7.3 -5.0 -4.7 -5.5 -0.9 +8.9 -3.0 -3.2 0 -3.4 ELONGATION [%] -0.8 -4.1 -4.4 -5.7 -10.5 -8.5 -1.2 +1.8 -2.6 -6.2 0 -5.9 To the best of our knowledge information contained in this data sheet is accurate as of the date of publication. However we do not assume any liability whatsoever for the accuracy and completeness of such information. The customer is responsible for the appropriate, safe and legal use, processing and handling of our products. No liability can be accepted in respect of the use of INEOS products in conjunction with other materials. The information contained herein relates exclusively to our products when not used in conjunction with any third party materials. © INEOS 2016 all rights reserved. CEREPLAS™ is a trade mark, the property of INEOS Enterprises Group Limited LOW ADDITION LEVEL OF PLASTICISER -50 PHR 11 April 2016 LOW ADDITION LEVEL OF PLASTICISER -50 PHR