Transcript
Certificate Number: 06-076A3 Page 1 of 5
For: Computing Scale Pre-packaging Model: 4600 Series, 5600 Series nmax: 3 000 Capacity: 15 lb x 0.005 lb / 30 lb x 0.01 lb, 30 lb x 0.01 lb, 30 lb x 0.01 lb / 60 lb x 0.02 lb, 60 lb x 0.02 lb Multi-Interval: 15 kg x 5 g / 6 kg x 2 g Platform: (see page 4) Accuracy Class: III
Keyboard and Touch Screen Data Entry Automatic Zero Tracking (AZT) Initial Zero Setting Mechanism (IZSM) Semi-automatic (Push-Button) with PLU Tare Integrated and External Printer(s)
Submitted By: Teraoka Seiko, Co., Ltd. 5-13-12 Kugahara Otaku Tokyo, 146-8580 Japan Tel: 732-828-3633 Fax: 732-828-4884 Contact: Takashi Kawazoe Email:
[email protected] Web site: www.nbidigi.com
Standard Features and Options Semi-automatic (push-button) Zero Setting Mechanism DPS4600/5600 Series, External Remote Weighing Element AC Power: 100-120VAC for DPS-4600/5600 Series 208-240VAC for AW-4600/ AW-5600 Series
Communication: (all communication listed is Non-metrological information) PC Communication: 4-line/Ethernet/RS-232C/Flash Memory Card RS 232C – Data Back-up PC and Cash Drawer Connection RS 485-PC Connection Ethernet-Client/Server TCP/IP Protocol (optional) Options: lb/kg External Conversion Key RF Communication for Non-metrological Information Sub Labeler for AW-4600/5600 Type AT/N/CP/FX Bottom labeler for AW-4600/ 5600Type AT POP labeler (for supplementary information) for AW-4600 Type AT/N Load Cells Used: Non-NTEP, Shanghai Teraoka Electronic Co. Ltd. Type K, used in the DPS-4600 Series Non-NTEP, Shanghai Teraoka Electronic Co. Ltd. Type N, used in the AW-4600 Series Non-NTEP, Shanghai Teraoka Electronic Co. Ltd. Type K, used in the DPS-5600/ AW-5600 Series 4600/5600 Series: DPS-4600 /5600Type Single/Twin/Basic External remote weighing element DPS-4600/5600 Type Modular, Single/Twin External remote weighing element and external printer(s) AW-4600/5600 Type AT/N/CP/FX Single unit with internal weighing element and printer(s) Temperature Range: -10 ºC to 40 ºC (14 ºF to 104 ºF) This device was evaluated under the National Type Evaluation Program and was found to comply with the applicable technical requirements of "NIST Handbook 44: Specifications, Tolerances and Other Technical Requirements for Weighing and Measuring Devices." Evaluation results and device characteristics necessary for inspection and use in commerce are on the following pages.
John P. Gaccione Chairman, NCWM, Inc.
Stephen Benjamin Chairman, National Type Evaluation Program Committee Issued: July 31, 2013 1135 M Street, Suite 110 / Lincoln, Nebraska 68508
The National Conference on Weights and Measures (NCWM) does not approve, recommend or endorse any proprietary product or material, either as a single item or as a class or group. Results shall not be used in advertising or sales promotion to indicate explicit or implicit endorsement of the product or material by the NCWM.
Certificate Number: 06-076A3 Page 2 of 5
Teraoka Seiko, Co., Ltd. Computing Scale / 4600 and 5600 Series Application: General-purpose manual weighing of prepackaged commodities. Scales must be marked "For Prepacking Use Only" or similar statement. All scales are (static) manual weigh scales. DPS-4600 and DPS-5600 models are manually wrap and label scales. AW-4600/5600 Type AT and CP are automatic wrap and label scales. AW-4600/5600 Type N and Type FX are automatic wrap, but manual label scales. Identification: The DPS-4600 and DPS-5600 models Type Single, Type Twin and Type Basic, have a permanent ID labels which is located on the inside, left back area, of the label roll compartment drawer (it is necessary to roll out the label drawer to view the ID label), for convenience, a duplicate ID label is placed on the right outside of scale, the information on this duplicate label can be verified by comparing it with the information on the internal permanent ID label. Type modular has a permanent label of the left side of the display / keyboard unit. The remote weighing element has a permanent identification label on its left side. The weighing platter has a plastic view hole to view the level indicator and the sub-platter is labeled to insure proper placement of weighing platter. The ID information for the AW-4600/5600 Type AT, N, and CP, are located on the right side of the in-feed conveyor compartment, this compartment is located below the display/control panel. The ID information for the Type FX scale is located on the front right side of the scale below the printer. Sealing: DPS-4600, DPS-5600, models Type Single, Type Twin, Type Basic, Type Modular Single and Type Modular Twin require one wire security seal, which secures a bracket covering the span/calibration switch. This bracket is located on the underside of the remote weighing element, in the recessed area, near the connection cable. The remote weighing elements used with these systems have digital load cells which once calibrated with a system are electronically matched to that system. The weighing element may be disconnected, but cannot be replaced unless the new weighing element is recalibrated with the system; this requires the wire security seal to be broken. The AW-4600/5600 Type AT and Type N scales require one wire security seal which is placed over the metal cover of the span/calibration switch, going through the three sealing screws provided. This sealing area is accessed through an access hole which is located in the left front of the scale; the access area is cover by a clear plastic cover, which allows visibility of the seal when it is in place. The AW-4600/5600 Type CP scales require one wire security over the span/calibration switch which is located on the left front of the scale below the conveyor assembly. The AW-4600/5600 Type FX scale requires one wire security over the span/calibration switch which is located on the right side bottom of the unit. Operation: DPS-4600, DPS-5600 Scales, Type Single, Twin and Basic are manual weigh, wrap and label scales. AW-4600/5600 Scales, Type AT, CP, N and FX are all manual (static) weigh scales with variations of automatic wrapping and/or labeling. Communication: All communication listed below is for non-metrological information:
PC Communication: 4-line/Ethernet/RS-232C/Flash Memory card RS 232C – Data back-up, PC and cash drawer connection RS 485- PC connection Ethernet- Client/server TCP/IP protocol (Optional)
Test Conditions: The emphasis of this evaluation was on device design, performance, operation, marking requirements, and compliance with influence factor requirements. The purpose of this evaluation was to include a multi-interval 30 lb x 0.01 lb / 60 lb x 0.02 lb, and single interval 60 lb x 0.02 lb capacity options. A model DPS-5600 type modular single was submitted for evaluation. The device was tested over a temperature range of -10°C to 40°C (14°F to 104°F). A load of approximately one-half capacity was applied over 100,000 times and was tested periodically during this time. Several increasing, decreasing, motion detection and shift tests were performed. Voltage tests were conducted using 100 V AC and 130 V AC. In addition, mathematical price computations, tare capabilities, discrimination tests and labels from the printer were also evaluated for compliance. Previous test conditions are listed below for reference:
Certificate Number: 06-076A3 Page 3 of 5
Teraoka Seiko, Co., Ltd. Computing Scale / 4600 and 5600 Series
Certificate of Conformance Number 06-076A2: The emphasis of this evaluation was on device design, operation, marking requirements and printed receipt format. The purpose of this evaluation was to include a “Multi-Interval” option. A model DPS-4600 type modular single was evaluated for compliance with Publication 14 “Multi-Interval” criteria. The printing format, mathematical price computations, tare, discrimination and zero requirements were evaluated. No additional testing was required. Certificate of Conformance Number 06-076A1: The emphasis of this evaluation was on device design, operation, and performance. The purpose of this evaluation was to add two new models, DPS-4600 Type Modular Single and DPS-4600 Type Modular Twin to the 4600 Series. Both of these new models are the same with the only difference being the Single has one printer and the Twin has two printers. Model DPS-4600 Type Modular Twin was presented for examination. This model has the same metrological components as the devices previously evaluation for the DPS-4600 group. This modular design has the printing components separated from the display/keyboard unit. The remote weighing element and display/keyboard are the same as those preciously evaluated. Several series of weighments were conducted to evaluate the systems performance and the corresponding weight labels were printed and reviewed. Certificate of Conformance Number 06-076: The emphasis of this evaluation was on device design, operation, performance, compliance with influence factor requirements and print format of receipts and weight tickets. Model DPS-4600 Type Twin was selected for the evaluation in the lab. This device was tested over a temperature range of –10 C to 40 C (14 F to 104 F). A load of approximately one-half capacity was applied to the scale over 100 000 times. The scale was tested periodically during this time. Additional tests were conducted using 100 VAC and 130 VAC power supplies. Different options of the print format were evaluated. A sample of the AW-4600 series, Type AT was evaluated in the field at the manufacture’s site. This series of scales have an internal weighing element using the Shanghai Teraoka Electronic Co. Ltd, Type N load cell, which is smaller in size then the type K (which was evaluated in the lab), both load cells have the same design and electrical specifications. These (AW-4600) automatic wrap/label devices have an input voltage of 208/240 volts and the CSA international Certificate of Compliance for these devices was reviewed. The performance of this internal load cell was evaluated by performing several increasing/decreasing load tests, as well as, shift tests at half and full capacity. The sealing locations for the AW-4600 series of integrated scales were evaluated for accessibility and sealing procedures were documented. Evaluated By: B. Fishman (NY) 06-076, 06-076A1; E. A. Payne, Jr (MD) 06-076A2; E. A. Payne, Jr (MD), Z. Tripoulas (MD) 06076A3 Type Evaluation Criteria Used: NIST, Handbook 44: Specifications, Tolerances and Other Technical Requirements for Weighing and Measuring Devices, 2013 NCWM, Publication 14: Weighing Devices, 2013. Conclusion: The results of the evaluation and information provided by the manufacturer indicate the device complies with applicable requirements. Information Reviewed By: S. Patoray (NCWM); L. Bernetich (NCWM), 06-076, 06-076A1; J. Truex (NCWM) 06-076A2, 06076A3
Certificate Number: 06-076A3 Page 4 of 5
Teraoka Seiko, Co., Ltd. Computing Scale / 4600 and 5600 Series Examples of Device:
Model DPS-4600 /5600 Type Single Model DPS-4600 DPS-5600 DPS-4600 DPS-5600 DPS-4600 DPS-5600 DPS-4600 DPS-5600 DPS-4600 DPS-5600
Model DPS-4600 /5600 Type Twin
Type Single Twin Basic Modular Single Modular Twin
Platform Size 342 mm x 285 mm (13 ½ in x 11 ¼ in) 342 mm x 285 mm (13 ½ in x 11 ¼ in) 342 mm x 285 mm (13 ½ in x 11 ¼ in) 342 mm x 285 mm (13 ½ in x 11 ¼ in) 342 mm x 285 mm (13 ½ in x 11 ¼ in)
Model DPS-4600 /5600 Type Basic
Model DPS-4600 /5600 Type Modular Single
Printer(s) One
Weighing Element External
Two
External
One
External
One
External
Two
External
Model DPS-4600/5600 Type Modular Twin
Display / Operation Base Unit with Full Color LCD Display Manual Operation Base Unit with Full Color LCD Display Manual Operation Base Unit with Full Color LCD Display Manual Operation Base Unit with Full Color LCD Display Manual Operation Base Unit with Full Color LCD Display Manual Operation
Examples of Device Continued:
Model AW-4600/5600 Type AT Model AW-4600 AW-5600
Type AT
Model AW-4600/5600 Type N Platform Size 305 mm x 210 mm (12 in x 8 ¼ in)
Model AW-4600/5600
Printer(s) One
Type CP Weighing Element Internal
AW-4600 AW-5600
N
305 mm x 210 mm (12 in x 8 ¼ in)
One
Internal
AW-4600 AW-5600
CP
290 mm x 210 mm (11 ½ in x 8 ¼ in)
One
Internal
AW-4600
FX
350 mm x 200 mm
One
Internal
Model AW-4600/5600
Type FX Display / Operation Base Unit with Full Color LCD Display Package Placed on Scale, Weighed, Automatically Wrapped and Labeled Base Unit with Full Color LCD Display Package Placed on Scale, Weighed, Automatically Wrapped and Labeled Base Unit with Full Color LCD Display Package Placed on Scale, Weighed, Automatically Wrapped and Labeled Base Unit with Full Color LCD Display for
Certificate Number: 06-076A3 Page 5 of 5
Teraoka Seiko, Co., Ltd. Computing Scale / 4600 and 5600 Series AW-5600
(13 ¾ in x 7 7/8 in)
the Operator Package Placed on Scale, Weighed, Automatically Wrapped and Manually Labeled
