Transcript
CG2-600
2V 600Ah(10hr)
Gel battery shows some distinctive advantages over flooded battery or AGM battery, such as super thermal stability, high deep discharge capability, good recovery from deep discharge , even if the battery is left discharged for three days, it will recover to 100% of capacity. With the above-mentioned advantages, the gel battery has long service life, specially suitable for motive power applications, such as golf trailer, sruubber, folklift,etc.The deep discharge cycles increased 50% as compared with the AGM battery. Battery Construction Component
Positive plate
Negative plate
Container
Cover
Safety valve
Terminal
Raw material
Lead dioxide
Lead
ABS
ABS
Rubber
Copper
General Features ● Nanometer SiO 2 and H 2 SO 4 gelled electrolyte technology for efficiency gas recombination of up to 99% and freedom from electrolyte maintenance or water adding. ● Not restricted for air transport-complies with IATA/ICAO Special Provision A67. ● UL-recognized component. ● Can be mounted in any orientation. ● Computer designed lead, calcium tin alloy grid for high power density. ● Long service life, float or cyclic applications. ● Maintenance-free operation. ● Low self discharge. ● Case and cover avaiable in both standard and flame restardant ABS. Dimensions and Weight Length(mm / inch) Width(mm / inch) Height(mm / inch) Total Height(mm / inch) Approx. Weight(Kg / lbs)
302 / 11.9 175 / 6.89 330 / 13.0 367 / 14.5 40 / 88.2
* Weight deviation: ± 3%
Separator PVC
Electrolyte Gelled acid
Performance Characteristics Nominal Voltage 2V Number of cell 1 Design Life 20 years Nominal Capacity 77oF(25oC) 10 hour rate (60.0A, 1.80V) 600Ah 5 hour rate (106A, 1.75V) 530Ah 1 hour rate (372A, 1.60V) 372Ah Internal Resistance Fully Charged battery 77oF(25oC) ≤ 0.7mOhms Self-Discharge 2% of capacity declined per month at 20oC(average) Operating Temperature Range Discharge -20~60oC Charge -10~60oC Storage -20~60oC 2200A(5s) Max. Discharge Current 77oF(25oC) Charge Methods: Constant Voltage Charge 77oF(25oC) 2.40-2.45VPC Cycle use Charge Voltage: Maximum charging current 120A -5mV/ oC Temperature compensation 2.20-2.30VPC Standby use -3.3mV/ oC Temperature compensation Discharge Constant Current (Amperes at 77oF25oC) End point volts/cell 1.60V 1.65V 1.70V 1.75V 1.80V
10min 15min 30min 1260 1188 1116 1044 972
1032 960 912 840 768
600 588 576 564 540
1h
3h
5h
10h
20h
372 360 348 336 318
156 152 148 146 140
114 110 108 106 102
63.0 62.4 61.2 60.6 60.0
33.6 33.0 32.4 32.1 31.5
Discharge Constant Power (Watts at 77oF25oC) End point volts/cell 1.60V 1.65V 1.70V 1.75V 1.80V
Total height with removeable cover: 367
10min 15min 30min 2157 2053 2000 1904 1804
1750 1736 1663 1559 1475
1123 1073 1023 993 950
1h
3h
5h
10h
20h
696 662 635 613 585
292 277 263 250 235
219 207 197 193 180
122 111 109 105 97.9
66.1 62.3 59.6 57.5 55.4
(Note)The above characteristics data are average values obtained within three charge/discharge cycles not the mimimum values. All data shall be changed without notice,Vision reserves the right to explain and update the information contained hereinto.
page1 of 2
www.vision-batt.com
CG2-600 O
Charging characteristic for Cycle use 2.40
100
0.14
2.20
600A 372A
80 60 40
1.60
0.05
1.40 0
8
12
16
20
24
Self-discharge characteristic 110
(V/CELL)
100 Capacity(%)
(V/6V)
(V/4V)
4
Charging time (hours)
Relationship between charging voltage and temperature (V/8V)
100%(0.1CAx10H) ---- 50%(0.1CAx5H) Charge Charge Voltage(2.45V/Cell) Charge Current 0.1CA o Temperature25 C
1.80
0.08
Discharge time
(V/12V)
Discharge
2.00
0.11
0.02
20
)Ratio
Voltage(V)/PerCell
0.17
ChargeCurrent(CA)
146A 106A 60A 1260A
120
Charged Volume(%)
Battery voltage(V)
Discharge characteristic (25 C)
2V 600Ah
90
15.6
10.4
7.8
5.2
2.6
15.0
10.0
7.5
5.0
2.5
14.4
9.6
7.2
4.8
2.4
13.8
9.2
6.9
4.6
2.3
60
13.2
8.8
6.6
4.4
2.2
50
-10
0
10
20
30
40
50
80 70
40
60
Ambient temperature( oC)
0
3
6
9
12 15 18 21 Storage time: months
24
27
30
Cycle service life in relation to depth of discharge
Capacity(%)
Life characteristics of Standby use
50% Depth of discharge
Number of cycles(cycles)
Life(year)
Temperature effects on capacity
Capacity (%)
Life(years)
Temperature effects on float life
Temperature( oC)
THE INTERNATIONAL CERTIFICATION NETWORK
ISO9001:2008
MH25860
G4M19906-9202-E-16
www.vision-batt.com
Shenzhen Center Power Tech. Co., Ltd. Center Power Industrial Park, Tongfu Industrial District Dapeng Town, 518120 Shenzhen, China Tel: (+86-755) 8431 8088 Fax: (+86-755) 8431 8038 E-mail:
[email protected] Copy Right Shenzhen Center Power Technology Co., Ltd (Edition 2014-1)
Page 2 of 2
