Transcript
Splined one-touch controller enables Quick & Easy adjustment ▶Fine bevel adjustment by minimum 0.1mm increment ▶A spline controller prevents loosening of bevel adjustment ▶Ideal for beveling work required various and repetitive adjustment.
Internet Homepage_ http://www.daesunggt.co.kr / http://www.chamfo.com / http://www.chamfo.co.kr
02
Patent information ■ International Patent Pending - PCT/KR2007/000765 - PCT/KR2008/003600 - PCT/KR2011/000246 - PCT/KR2011/000260 ■ International Patent - China - Taiwan - Russia - USA - EU - Japan
ZL200710005742.3 TWI337576 RU2 388581 C1 US7,635,242 B2 EP 1 984 139 JP 4938034
※Int'l Patent Pending in 20 countries - Trade Mark: Chamfo (40-2006-0043030) - Beveller improved a guide roller's durability (10-0608293) - One-touch beveller (10-05752012) - Guide Bar for straight beveling ((10-064400) - Multi beveller (10-0784772) - Attachment for pipe beveling (10-0899957) - Insert for radius beveling - Multi beveller reducing friction against a work piece - Weld bead shaving machine - Pneumatic beveling machine which is easy to replace inserts - Weld bead shaving machine with an one-touch controller - One-touch type bevel adjustment controller - Beveling machine performing surface milling simultaneously for weld preparation - Weld bead shaving machine with a safe feeding guide - (pending) An insert available for chamfer and radius chamfer - (pending) Weld bead shaver with dual spindle shafts for stability improvement - (pending) Pneumatic beveller for smaller spaces - (pending) Weld bead shaver with improved stability - (Design) Beveller - (Design) Adaptor for beveller - (Design) Spline assembly for beveller (3 designes) - (Design) Corner beveling tool (2 designes) - (Design) Cutter for beveller (6 designes)
※Appearance and specifications of our products in this catalogue could be changed without any prior notice for quality improvement
03
Contents for WELD PREPARATION Pipe & plate beveling machine
Plate & round plate decladding, weld bead/coat/paint removing machine Plate & round plate decladding machine Spot weld preparation Internal/External pipe beveling machine In/External pipe & plate beveling machine
GTW-1500 GTW-1500W series GTW-2100 GTW-2700 GTW-1500K-DF GTW-2700DF GTW-2700IM GTI-1200 GTW-1500IW GTW-2100IW
5 6 7 7 8 8 9 9 10 10
for WELD BEAD SHAVING Weld bead shaving machine Weld bead inside pipe shaving machine Weld bead shaving machine (Guide type) Side weld bead shaving machine Side weld bead shaving machine (Guide type) Weld bead shaving machine (Dual cutters type)
GTB-1500K-S GTB-2100-S GTB-1500K-IS GTB-2100IS GTB-2100LS GTB-2100LSDF-H GTB-2100A GTB-2100LSA GTB-2400KW
11
GTR-3EC GTR-3AC series
15
GTL-38 series GT-38 series GT-50TS GT-50CR GT-100 series
16
11 12 12 13 13 14 14 15
for RADIUS BEVELING radius beveling mahcine (Electric) radius beveling machine (Pneumatic)
16
for DEBURRING (CHAMFERING) Smaller spcase deburring (chamfering) machine (Pneumatic) Deburring (chamfering)/corner chamfering machine (pneumatic) Deburring (chamfering) machine (Pneumatic) Radius deburring (chamfering) machine (Pneumatic) Deburring (chamfering)/radius chamfering (Electric)
04
17 18 18 19
GTW-1500
15。~ 75。/ 0 ~10C
For Pipe & Plate
Weld Preparation Beveller
Plate beveling
Patent - Weld prep bevellers by one-touch type bevel adjusment (Patent: 10-0955216) - One-touch type bevel adjusment (Patent: 10-0955217)
Features - Easy to bevel adjustment - Easy to bevel angle adjustment - Easy to replace insert - Easy to handle by low vibration design & light weight - Pipe and plate beveling machine - Precise adjustment: minimum 0.1mm step - Various materials beveling by one kind of inserts - Spline adjustment system - no loose adjusted bevel depth
external pipe beveling
GTW-1500
Specification Bevel Adjustment
One-touch spline controller
Adjustment increments
minimum 0.1mm of unit
Usages
Plate & Pipe's beveling for weld preparation 15° ~ 75°
Maximum bevel range per angle
pipe size Weight Power Inserts Applications
Max. Thickness, mm (inch)
Max. Width, mm (inch)
15°
23 mm (0.905)
24 mm (0.945)
30°
15 mm (0.591)
17 mm (0.669)
45°
10 mm (0.394)
15 mm (0.591)
75°
2.5 mm (0.098)
11 mm (0.433)
min. 65A (76.3 mm or 2.5") 3.8kgs 1050W (220V/60Hz, Domestic model) No. of inserts: 3 inserts / Parts no.: SPMT090408-GTW Steel (carbon & stainless steel, etc.), Non-ferrous metal, other materials
05
GTW-1500WD
0。~ 90。/ 0 ~ 10C
For Pipe & Plate
Weld Preparation Beveller
GTW-1500WB
0。~ 90。/ 0 ~ 10C
For Pipe & Plate
Weld Preparation Beveller
GTW-1500WM
0。~ 90。/ 0 ~ 10C
For Pipe & Plate
Weld Preparation Beveller
Specification Bevel Adjustment
GTW-1500WD/WB/WM One-touch spline controller
Adjustment increments
minimum 0.1mm of unit
Usages
Plate & Pipe's beveling for weld preparation 0° ~ 90° Thickness, mm (inch)
Maximum Bevel range per angle
Pipe Size
22 mm (0.866)
7.5 mm (0.295)
15°
22.5 mm (0.886)
23.5 mm (0.925)
30°
15 mm (0.591)
17 mm (0.669)
45°
10 mm (0.394)
15 mm (0.591)
75°
2.8 mm (0.110)
11 mm (0.433)
90°
7.5 mm (0.295)
11 mm (0.433)
min. 65A (76.3 mm or 2.5" diameter)
Weight
4.2kgs
Power
1080 ~1200W
Inserts Applications
06
Width, mm (inch)
0°
No. of inserts: 3 inserts / Parts no.: SPGT100408-GTW Steel (carbon & stainless steel, etc.), Non-ferrous metal, other materials
GTW-2100
0。~ 90。/ 0 ~ 15C
For Pipe & Plate
Weld Preparation Beveller
GTW-2100
Specification Bevel Adjustment
One-touch spline controller
Adjustment increments
minimum 0.1mm of unit
Usages
Pipe & Plate's beveling for weld preparation 0° ~ 90°
Maximum Bevel range per angle
Thickness, mm (inch)
Width, mm (inch)
0°
27 mm (1.063)
14.5 mm (0.453)
15°
28 mm (1.102)
29 mm (1.142)
30°
23 mm (0.905)
26.5 mm (1.043)
45°
15 mm (0.591)
22 mm (0.866)
75°
3.2 mm (0.126)
12.5 mm (0.492)
90°
14.5 mm (0.453)
12.5 mm (0.492)
Pipe Size
min. 100A (101.6 mm or 3.5" diameter)
Weight
6.5kgs
Power
1400W (1600W ~ 1700W)
Inserts
No. of inserts: 3 inserts / Parts no.:SPGT100408-GTW (or DSGT1305-GTW)
Applications
Steel (carbon & stainless steel, etc.), Non-ferrous metal, other materials
GTW-2700
15。~ 75。/ 0 ~ 19C
For Pipe & Plate
Weld Preparation Beveller
GTW-2700
Specification Bevel Adjustment
One-touch spline controller
Adjustment increments
minimum 0.1mm of unit
Usages
Pipe & Plate's beveling for weld preparation 15° ~ 75°
Maximum Bevel range per angle
Pipe Size
Thickness, mm (inch)
Width, mm (inch)
15°
33 mm (1.299)
34 mm (1.339)
30°
28 mm (1.102)
32 mm (1.260)
45°
19 mm (0.748)
27 mm (1.063)
75°
3.6 mm (0.142)
14.5 mm (0.571)
min. 300 (317 mm or 12.5" diameter)
Weight
11.5kgs
Power
2400W (2600W)
Inserts Applications
No. of inserts: 3 inserts / Parts no.: DSGT1305-GTW Steel (carbon & stainless steel, etc.), Non-ferrous metal, other material
07
GTW-1500K-DF
Width: max. 40mm / Depth: Max. 6mm 90。(Standard) Max.40mm(Width)
Standard type:
Decladding Machines for plate & round plate
75。(Upon request) Max.40mm(Width)
(Order production: Weld Bead Shaver, Coating Removal Machine)
6mm 75。
6mm 90。 max. 40mm (width)
max. 40mm (width)
Order production 40mm
Order production 30mm
40mm
30mm 30mm
GTW-1500K-DF
Specification Bevel Adjustment
One-touch spline controller
Adjustment Increments
min. 0.1mm of unit
Usage
Decladding or coating removal/weld bead shaving Width direction: max. 40mm
Decladding Range
Depth direction: max. 6mm Insert Angle
90。(75。available)
Weight
5.6 kgs (optional model: 6.2 kgs)
Power
1050W
Insert
No. of inserts: 3 inserts / Parts no.: SPGT100408-GTW
Applications
GTW-2700DF
Steel (carbon steel, stainless steel), Non-ferrous metal, other materials
Width: max. 50mm / Depth: Max. 13mm
Decladding Machines for plate & round plate
GTW-2700DF
Specification Bevel Adjustment
One-touch spline controller
Adjustment Increments Usage
min. 0.1mm of unit decladding and coating removal/weld bead shaving Width direction: max. 50mm
Decladding Range
Depth direction: max. 13m
Insert Angle
45° (90° available)
Weight
14.5kgs
Power
2400W (2600W)
Insert Applications
No. of inserts: 3 inserts / Parts no.: DSGT-1305 Steel (carbon steel, stainless steel), Non-ferrous metal, other materials
90。(Standard) Max.50mm(Wdith)
75。(Upon request) Max.50mm(Width)
5。 13mm 4
13mm 90。
max. 50mm (width)
08
max. 50mm (width)
GTW-2700IM
30。~ 60。/ Width: 51mm
Discontinuous (Skip) weld preparation
GTW-2700IM
Specification Bevel Adjustment
One-touch spline controller
Adjustment Increment
min. 0.1mm of unit
Usage
Discontiuous (Skip) weld preparation
Bevel Angle
30。~ 60。
Bevel Range
Width 51mm (fixed)
Weight
16 kg
Power
2300W (2600W)
Insert
No. of inserts: 3 inserts / Parts no.: DSGT1305-GTW
Application
GTI-1200
Steel (carbon steel, stainless steel), Non-ferrous metal, other materials
30。/ 45。
for Plate & in/external pipe beveling
Weld Preparation
GTI-1200
Specification Bevel Adjustment
One-touch spline controller
Adjustment Increment
min. 0.1mm of unit
Usage
Internal / external pipe & plate beveling
Bevel Angle
T type (20°- 30°- 45° )
F type (30°- 45°- 60° )
Thickness, mm (inch) Width, mm (inch)
Thickness, mm (inch)
Width, mm (inch)
Maximum bevel range
20。
5.5 mm (0.217)
5.8 mm (0.228)
30。
5.4 mm (0.213)
6.2 mm (0.244)
per angle
30。
9 mm (0.354)
10.4 mm (0.409)
45。
9.2 mm (0.362)
13.0 mm (0.512)
45。
9.3 mm (0.366)
13 mm (0.512)
60。
5.4 mm (0.213)
6.2 mm (0.244)
Weight Pipe size
6.0 kgs min. 36 mm diameter
Power
1400W (1600W~ 1700W)
Insert
No. of inserts: 3 inserts / parts no.: APMT-1604PDSR-MM
09
GTW-1500IW
30。~ 90。/ 0 ~ 10C
In / external pipe, plate beveling
Weld Preparation
GTW-1500IW
Specification Bevel Adjustment
One-touch spline controller
Adjustment increments
minimum 0.1mm step
Usages
In/external pipe, plate beveling for weld preparation 30。~ 90。
Maximum Bevel range per angle
Thickness, mm (inch)
Width, mm (inch)
30。
15mm (0.591)
17mm (0.669)
45。
10mm (0.394)
15mm (0.591)
75。
2.8mm (0.110)
11mm (0.433)
90。
7.5mm (0.295)
11mm (0.433)
Weight
4.6 kgs
Power
1080W ~ 1200W
Inserts Applications
GTW-2100IW
No. of inserts: 3 inserts / Parts no.: SPGT100408-GTW Steel (carbon & stainless steel, etc.), Non-ferrous metal, other materials
30。~ 90。/ 0 ~ 15C
In / external pipe, plate beveling
Weld Preparation
GTW-2100IW
Specification Bevel Adjustment
One-touch spline controller
Adjustment increments Usages
minimum 0.1mm step Inner & outer pipe or plate edge beveling for weld preparation 30。~ 90。
Maximum Bevel range per angle
Weight Power Inserts Applications
10
Thickness, mm (inch)
Width, mm (inch)
30。
23mm (0.905)
26.5mm (1.043)
45。
15mm (0.591)
22mm (0.866)
75。
3.2mm (0.126)
12.5mm (0.492)
90。
14.5mm (0.453)
12.5mm (0.492)
6.5kgs 1400W (1600W ~ 1700W) No. of inserts: 3 inserts / Parts no.: SPGT100408-GTW Steel (carbon & stainless steel, etc.), Non-ferrous metal, other materials
GTB-1500K-S
Width: 25mm / Height: max. 5mm
Weld Bead Shaver
Specification Height Adjustment Adjustment Increment Milling units Usage
25mm
5mm
Shaving range Weight Drive Motor
min. 0.1 mm step Single facemill cutter head Shaving of weld bead on plate (pipe model, available) Width: 25 mm, Height: -1.6 mm ~ +6 mm 3.2 kgs 220V / 60Hz only (Domestic model)
Power
1050 W
Insert
No. of inserts: 3 inserts / Parts no.: SPGT100408-GTW
Application
GTB-2100-S
GTB-1500K-S One-touch spline controller
Non-ferrous metal, Steel, other materials
Width: 30mm / Height: max. 6.5mm
Weld Bead Shaver
GTB-2100-S
Specification Height Adjustment Adjustment Increment Milling units Usage
30mm
6.5mm
Shaving range
One-touch spline controller min. 0.1 mm step Single facemill cutter head Shaving of weld bead on plate (pipe model, available) Width: 30 mm, Height: -2 mm ~ +6.5 mm
Weight
6.5 kgs
Power
1400W (1600W ~ 1700W)
Insert
No. of inserts: 3 inserts / Parts no.: SPGT100408-GTW
Application
Non-ferrous metal, Steel, other materials
11
GTB-1500K-IS
Width: min. 20mm / Height: max. 3mm
Removal of the internal weld bead of pipe
Specification Bevel Adjustment Adjustment Increment Milling units Usage Shaving range Pipe size
min. 0.1 mm step Single facemill cutter head Shaving of weld beads inside a pipe Width: max. 20 mm, Height: -5 mm ~ +3 mm min. 300mm inner diameter
Weight
3.2 kgs
Power
1050W (220V / 60Hz only, Domestic model)
Insert
No. of inserts: 3 inserts / Parts no.: SPGT100408-GTW
Application
GTB-2100-IS
GTB-1500K-IS One-touch spline controller
Non-ferrous metal, Steel, other materials
Width: min. 25mm / Height: max. 8mm
Removal of the internal weld bead of pipe
Specification Bevel Adjustment Adjustment Increment Milling units Usage Shaving range Pipe size
min. 0.1 mm step Single facemill cutter head Disposal of the internal weld bead of pipe Width: max. 25 mm, Height: -5 mm ~ +8 mm min. 350mm inner diameter
Weight
6.5 kgs
Power
1400W (1600W ~ 1700W)
Insert
No. of inserts: 3 inserts / Parts no.: SPGT100408-GTW
Application
12
GTB-2100-IS One-touch spline controller
Non-ferrous metal, Steel, other materials
GTB-2100LS
Width: 35mm / Height: max. 6mm
35mm
6mm
Weld Bead Shaver (Guide type)
GTB-2100LS
Specification Bevel Adjustment
One-touch spline controller
Adjustment increments
min. 0.1 mm of unit Milling Unit (Chamfo)
Guide unit Manual feeding speed control (spring type) 240mm long removal length 2 stong magnet guides
Single facemill cutter head Height range: +4 ~ -4mm ( or +6 ~ -2 mm) Width range: 35mm (fixed)
Components
Usage
Removal of the weld bead on a wall or a floor
Drive Motor
1400W (1600W ~ 1700W)
Weight
12kgs
Inserts
no. of inserts:4 inserts / parts no.: SPGT100408-GTW
Application
Steel, Stainless Steel, Non-ferrous metal, etc.
GTB-2100LSDF-H
Width: 40 ~ 70mm / Height: max. 13mm
40~70mm
13mm
Weld Bead Shaver (Guide type)
GTB-2100LSDF-H
Specification Bevel Adjustment
One-touch spline controller
Adjustment increments
min. 0.1 mm of unit Milling Unit (Chamfo)
Components
Dimension Usage Drive Motor
Guide unit
Single facemill cutter head (40mm diameter) Height range: +13 ~ -1.5mm ( or +6 ~ -2 mm) Width Adjustment range: 40 ~ 70mm
5 step feeding speed by hydraulic cylinder 300mm long removal length 4 stong magnet guides
Length: 620 (850) mm / Width: 322 mm / Height: 235 mm Removal of weld bead or foreign materials on a wall or a floor 1400W (1600W ~ 1700W)
Weight
17 kgs
Inserts
no. of inserts: 4 inserts / parts no.: SPGT100408-GTW
Application
Steel, Stainless Steel, Non-ferrous metal, etc.
13
GTB-2100A
Width: max. 20mm / Height: max. 12mm
Side Weld Bead Shaver
GTB-2100A
Specification Bevel Adjustment
One-touch spline controller
Adjustment increments
min. 0.1 mm of unit
Components
Single facemill cutter / Height range: +12 ~ -2.5mm / Width adjustment range: 0 ~ 20mm (left and right)
Dimension
Length: 470mm / Width: 175mm / Height: 255mm
Usage
Removal of side weld bead
Drive Motor
1400W (1600W ~ 1700W)
Weight
7 kgs
Inserts
no. of inserts: 6 inserts / angle: 90。/ parts no.: SPGT100408-GTW
Application
Steel, Stainless Steel, Non-ferrous metal, etc.
GTB-2100LSA
Width: max. 20mm / Height: max. 12mm
Side Weld Bead Shaver
GTB-2100LSA
Specification Bevel Adjustment
One-touch spline controller
Adjust increments
min. 0.1 mm of unit Milling Unit (Chamfo)
Components
Dimension Usage Drive Motor
Feeding speed control: manual type (Hydraulic Controller Type: Upon request) 250mm long removal length 2 strong magnets
Length: 540mm / Width: 207mm / Height: 225mm Removal of the side weld bead 1400W (1600W ~ 1700W)
Weight
11kgs
Inserts
no. of inserts: 6 inserts / angle: 90。/ parts no.: SPGT100408-GTW
Application
14
Guide unit
Single facemill cutter head Height range: +12 ~ -2.5mm Width adjustment range: 0 ~ 20mm (left and right)
Steel, Stainless Steel, Non-ferrous metal, etc.
GTB-2400KW
width: 35mm / Height: max. 6mm
Weld Bead Shaver Dual facemill cutters to minimize vibration
GTB-2400KW
Specification Bevel Adjustment
One-touch spline controller
Adjustment Increment
min. 0.1 mm step
Milling units
Dual counter facemill cutters
Usage
removal of the weld bead of plate (pipe: order production)
Shaving range
Width: 35 mm (fixed), Height: -2.0 mm ~ +6 mm
35mm
6mm
Weight
7.7 kgs
Pipe size (option)
min. 300 (301 mm diameter or 12.5 inch) with pipe guide set
Power
1400W (1600W ~ 1700W)
Insert
No. of inserts: 6 inserts / Parts no.: SPGT100408-GTW
Application
GTR-3EC
Steel, Non-ferrous metal, other materials
R3, R4, R5
Electric Radius Beveller
GTR-3EC
Specification Bevel Adjustment Adjustment Increment
One-touch spline controller min. 0.1 mm step
Usage
Fillet (Radius) beveling for shipbuilding industry
Power
220V / 60Hz only (Domestic model)
RPM No. of cutters Insert size
Variable speed 1 cutter (8 blades) R3, R4, R5 Features
Radius Cutter
Turning base plate
○
Cutter ejection pins
○
Spindle lock Straight guide (option)
○ available
15
GTR-3AC
R3, R4, R5
Pneumatic Radius Beveller Radius Cutter
GTR-3AC-P
GTR-3AC-G
GTR-3AC-P/G/N
Specification Usage
Fillet (Radius) beveling for shipbuilding industry
Models
GTR-3AC-P / GTR-3AC-G / GTR-3AC-N
No. of cutters
GTR-3AC-N
1 cutter (8 blades)
Available radius
R3, R4, R5 GTR-3AC-P
GTR-3AC-G
GTR-3AC-N
one-touch type
screw type
screw type
Turning base plate
○
○
×
Cutter ejection pins
○
×
×
Spindle lock
○
○
○
available
×
×
Adjustment
Straight guide(option)
GTL-38S Series
0 ~ 1C / R2, R3
Pneumatic Deburring Machine for smaller places
GTL-38SC
Specification Beveling Adjustment
Screw type
Adjustment Increment Usage
min. 0.166mm of unit Deburring / Radius deburring at reach-to-difficult places (small spaces)
Dimension
Radius Cutter
Chamfering Cutter
1.5 kgs
Air Pressure / Consumption rate Model
Cutter (not including)
Application Requirement
16
Length: 323mm / Height: 55mm / Width of base plate: 54mm
Weight
6kg/㎠ / 0.3㎥/min GTL-38S (Deburring)
GTL-38R (Radius deburring)
No. of cutters
1 cutter
No. of cutters
Bevel Angle
45。
Bevel Angle
1 cutter (6 blades) -
Bevel Range
0 ~ 1C
Bevel Range
R2, R3
Mild Steel, Non-ferrous metal, etc Hole diameter: min. 16mm (inner hole requires min. 21mm space to handle)
GT-38 Series
0 ~ 1.5C / R1, R1.5, R2
Pneumatic Deburring Machine Straight line, Curve & Hole Chamfering
Corner Chamfering
Straight line, Curve & Hole chamfering / radius chamfering
Bevelig at acute angle or narrow corner is possible with corner guide
R1
90。or acute angle
Exclusive radius insert tip Part No. :DCGW070202 - R1·R1.5·R2 Patent No. : 10-2010-0013378 Design : 30-2010-0006538
GT-38 Series
Specification Models
GT-38S
GT-38SC
GT-38R
GT-38SR
0 ~ 1.5C
0 ~ 1.5C
-
0 ~ 1.5C
0 ~ 1.5C
Radius
-
-
1R, 1.5R, 2R
1R, 1.5R, 2R
1R, 1.5R, 2R
Corner
-
corner
-
-
corner
Chamfer (45°) Bevel Type
Bevel Adjustment
one-touch spline controller
Adjustment Increment
min. 0.1mm unit
Chamfer (45°, 2 pcs) Insert
GT-38SCR
DCMT070204
DCMT070204
-
DCMT070204
DCMT070204
Radius (2 pcs)
-
-
DCGW070202-R1, R1.5 & R2
DCGW070202-R1, R1.5 & R2
DCGW070202-R1, R1.5 & R2
Corner (rotary burr, 1pcs)
-
SK-1M-GT
-
-
SK-1M-GT
O
Air pressure / consumption rate
6kg/㎠ / 0.3㎥/min
Weight
1.2 kgs
Straight Line (plate)
O
O
O
O
Flat Shape
O
O
O
O
O
Hole
O
O
O
O
O
Inner corner of accute angle (min. 30°)
-
O
-
-
O
Radius
-
-
O
O
O
Firmly grasp the body of the beveller, place the base plate on the work object, and work slowly with the tip touching the object.
With the corner (R) guide flush against the face of bearing, work while moving in the direction of the tip’ s rotation.
Working direction Working direction Corner bevel
Spindle spinning direction
For beveling curves, holes must have a diameter of at least 7.5mm, and radii must measure at least 3.5mm. For beveling corners, radii must measure at least R1mm.
Work objects with grooves must be at least 8mm thick.
at least ø7.5mm
at least R3.5mm corner at least R1mm
at least 8mm
17
GT-50TS
0 ~ 3C
Pneumatic Deburring Machine
GT-50TS
Specification Bevel Adjustment
One-touch spline controller
Adjustment Increment
min. 0.1 mm step
Weight
1.5 kgs
Air pressure / Consumption rate
6kg/㎠ / 0.3㎥/min No. of inserts: 2 inserts
Inserts
Rough edge
Cut edge (option)
VCGW110304 Bevel Range Angle
45。
Durable Guide Roller Usages
GT-50CR
VCGT110304 C0 ~ C3.0
Patented guide roller (none bearing) plate, curve, and hole (min. Ø10) edge chamfering
R2, R3, R4
Pneumatic Radius Deburring Machine
Radius Cutter
GT-50CR
Specification Bevel Adjustment Adjustment Increment Weight Air pressure / Consumption rate Radius Cutter Inserts Guide Applications
18
One-touch spline controller min. 0.1 mm step 1.5 kgs 6kg/㎠ / 0.3㎥/min Number of cutter: 1 cutter (8 blades) Cutter size: R2, R3, R4 Clamp roller Straight line, curve, hole (min. Ø20) radius beveling
GT-100 Series
0 ~ 3C / 2R, 3R
Electric Deburring Machine Straight line beveling
Exclusive radius insert tip Part No. :DCGW11T304 R1 / R1.5 / R2 / R2.5 / R3 Patent No. : 10-2010-0013378 Design : 30-2010-0006538
Curve or Hole beveling
GT-100 Series
Specification Model
GT-100B
GT-100BR
Beveling Adjustment
One-touch controller
Adjustment Increment
accurate min. 0.1mm of unit
Weight
2.5kg No. of inserts: 2 inserts
Inserts
Bevel Range Durable guide roller Angle
Working direction Corner bevel
DCGW11T304-R2 or R3
0 ~ C3.0
R2, R3
Patented guide roller (none bearing)
Clamp Bearing type
45。
With the straight line guide flush against the guide pin, work by moving in the direction of the tip’s rotation.
Working direction
Cut edge VCGT110304
n/a
Straight line, curve, hole (min. Ø10) deburring
Usages
Firmly grasp the body of the beveller, place the base plate on the work object and work slowly with the tip touching the object.
Rough edge VCGW110304
Spindle spinning direction
With objects for beveling, holes must have a diameter of at least 10mm, and radii must measure at least 5mm. Work objects must have a thickness of at least 10mm.
Work objects with grooves must be at least 10mm thick.
at least ø10mm (ø10.5)
at least
at least 10mm
at least 24mm
R5mm
19
1204
Professional leading manufacturer of bevellers 139, Yetshintanjin-ro, Daedeuk-gu, Daejeon, 306-819 Korea. Tel_ +82·42·627·5508, 628·0468 / Fax_ +82·42·42·627·5509 e-mail_
[email protected] Internet Homepage_ http://www.daesunggt.co.kr / http://www.chamfo.com / http://www.chamfo.co.kr
