Preview only show first 10 pages with watermark. For full document please download

Charge Station User Manual

   EMBED

Share

Transcript

Only for charging i3Sync Transmitters How to use 1) Connect the power cable at AC socket and plug into an electrical outlet. 2) Insert the i3SYNC transmitters on charging terminal of the tray. 3) Confirm the charging state at the charging indicators. 4) When charging is completed, store the i3SYNC transmitters after disconnecting the transmitters from charging terminal. Charging indicators Charge station User Manual 1) Red: Charging. 2) Orange: The transmitter is ON. Please turn OFF the transmitter. 3) Clear: Charging completed. Safety precautions Components • Do not place heavy items on the power cable. • Do not place the power cable near heater and do not expose the cable on the heat. • Use the power cable supplied only. Do not modify. • Unplug the power cable from the electrical outlet before cleaning or moving the station and when you do not use for a long time. • When disconnecting, grasp the AC power plug and pull straight out of the electrical outlet. • Stop using, unplug the AC power plug from the electrical outlet immediately in the situation of unusual sound or smell or overheating (too hot to touch). • Do not touch the power plug with wet hands. Power cable Charge station Specifications Product appearance Size Receiver tray Charging terminal Weight Accessory tray Input / Output Power Max. rated power Operating Temperature Charging time 230mm x 130mm x 95mm 620g AC Socket(x 1), micro 5pin USB (x 4) AC 110-220V , 50/60Hz, 0.4A 18W 0 ~ 40 About 2 hour Charging indicator AC socket • : Alternating current • : Direct current • : Protective earth terminal WWW.i3-TECHNOLOGIES.COM [email protected]