Transcript
RS-232 Remote Control Protocol
* RS-232 transmission format: Baud Rate: 9600 bps Data Bit: 8 bits Parity: None Stop Bit: 1 bit
Specifications • Frequency bandwidth: • Inputs:
2.25Gbps(single link) - 4 x HDMI female ports (Type A connector) - 4 x S/PDIF coax digital audio inputs. - 4 x Toslink digital audio inputs. - 1 x HDMI female port (single link). - 1 S/PDIF coax digital audio output. - 1 x Toslink digital audio output. - 5VDC 0.85kgs 9.4”(W) x 4.3”(D) x 2”(H)
• Output:
• Power Supply • Weight: • Dimension:
DVD 3
HX410A
DVD 1 DVD 2
STB
4-in 1-out HDMI 1.3 / Digital Audio Switcher DVD 1 LCD TV
DVD 2
DVD 3
STB
www.tributariescable.com
quality picture, for instance, flickering, noise (on-screen “sparkling”), a grainy image or no image, the use of the SIGNAL ENHANCE may result in an improvement. To turn on this feature simply press the “SIGNAL ENHANCE” button. The LED will illuminate when the signal enhancement circuitry is activated. If no improvement is experienced, recheck all your connections, recycle the power to the affected components and/ or replace components and cables until the cause is determined. However, if an appropriate picture quality is displayed, the use of the SIGNAL ENHANCE button will not produce a visible change. 4 Power/Indicator: The LED will illuminate when the power is connected.
HX410A
Operational Controls and Functions
Introduction
5
REAR PANEL
HX410A is a high performance HDMI switcher with 4 separate digital audio inputs and 1 output. It provides for various HDMI sources to share one HDTV display. Simply press one button to select your desired HDMI source for display on the HDTV.
RS-232
HDMI OUT
• • • • • • • •
HDMI 1.3 and HDCP 1.1 compliant. Supports 30/36/48 bit color depth display. Supports High Definition audio – Dolby Digital True HD® and DTS-HD®. Signal Enhancement feature allows you to improve signal quality for long cable lengths. Optical and coaxial digital inputs and outputs. LED indicators. Ideal for home theater integration and presentation. Supports high resolution input: PC: VGA, SVGA, XGA, SXGA, and UXGA (1600 x 1200) and 1920 x 1200 & HDTV: 480i, 576i, 480p, 576p, 720p, 1080i, and 1080p • Remote control. • Easy to install and simple to operate. • Supports RS232 operation.
Operational Controls and Functions
1 1 2 3 4
5
6
FRONT PANEL
OPTICAL IN
OUT
OPTICAL
Features
4
COAXIAL
HDMI IN 4
6
4
3
COAXIAL IN
2
1
HDMI IN 3
4
HDMI IN 2
3
2
1
DC 5V
HDMI IN 1
2
3
HDMI output: HDMI output of the HX410A to the HDMI input of your display. HDMI inputs: Connect your various HDMI sources to each of the HDMI inputs of the HX410A. Power: Plug the supplied 5VDC power supply into the unit. Digital audio inputs: - Connect your various Toslink® sources to the Toslink® inputs of the HX410A. - Connect your various S/PDIF sources to the coaxial inputs of the HX410A. Digital audio output: - Connect the Toslink® output of the HX410A to the Toslink® input of your processor. - Connect the digital S/PDIF coax output of the HX410A to the digital coax input of your processor. RS232: 9-pin D-sub female connector for connecting to a control console for remote control. (Cable not included) * The connection between HX410A and remote controller through RS-232 modem cable.
HDMI 1.3
POWER 1
HX410A
2
3
4
INPUT
SIGNAL ENHANCE
1
4x1 HDMI/Digital Audio Switcher
1
Hand-Held IR Remote Control
2
3
4
Remote control sensor. Input select/Indicators: Press the "INPUT" button repeatedly to switch to your desired input source. The LED will illuminate to indicate which input source is selected. 3 Signal Enhancement/Indicator: This feature is useful when encountering poor picture quality. The possibilities include; a poor quality or too long an HDMI cable, or inconsistencies in the connected electronics. If, after having connected the HX410A and experienced a poor
2
1 2
3
1 2
Power: Press the button to turn on/off the unit. Direct input selector: (1-4) Press the appropriate number button to select your desired input source. Void buttons (5-0 – No function)
3
CR-22
