Transcript
Access Control Access Control Index •
Introduction
AC2
•
Motorised Locks Features and Functions Photo Gallery Range Table Motorised Locks Control Unit
AC3 AC4 AC5 AC6 AC6
•
•
•
•
•
•
Solenoid Locks Features and Functions Photo Gallery & Range Table Solenoid Locks Electric Strikes Features and Functions Photo Gallery & Range Table Mortice Strikes Rim Strikes
AC7 AC8 AC9 AC10 AC11 AC12 AC12
Magnetic Locks Features and Functions Photo Gallery Range Table Surface Mounted Locks Flush Mounted locks Brackets
AC13 AC14 AC15 AC16-17 AC17 AC18
Readers Features and Functions Photo Gallery Range Table Keypads Card Readers Proximity Readers Reader Cards
AC19 AC20 AC21 AC22 AC23 AC23 AC24
Introduction
How to Specify
Chubb offers a very comprehensive range of Access Control products. They cover readers and locks, which together open up many options for electronically controlling peoples access. Keypads, Cardswipes and Proximity readers offer methods of entry control which require people to punch in an access code, swipe a reader card or offer up a proximity card or tag. The locks are available as motorised and solenoid variants that automatically withdraw the bolt. Electronic strikes which allow the release of a mortice or rim locks’ bolt from the frame. Magnetic force that use magnetic force to lock the door.
Chubb have developed a series of icons to enable the process of product specification to be simplified.
Chubb is accredited with and meets the requirements of BS EN ISO 9001: 1994
From today you can specifically detail your requirements for a product, therefore ensuring that it meets a particular standard or approval. In addition you can now ask for specific security features to be included in the product you specify. Example: If you require a keypad reader that has tamper resistance look for the screw driver icon (number 7) in the range.
Security Features 1
Protected Section Products are available as an option on a patented key section. 2
Drill Resistant Hardened protection against drill attack. 3
Saw Resistant Hardened protection against saw attack. 4
Force Resistant
Chubb, Simplifying the Specification Process.
Built in strength against force attack.
Standards & Approvals The application of the CE mark is currently restricted to products covered by the low voltage and EMC Directives.
5
Pick Resistant Built in protection to resist picking. 6
Torque Resistant Built in strength against torque attack. 7
Tamper Resistant Built in protection against Tampering. 8
Corrosion Resistant Products conform to appropriate anti-corrosion requirements. 9
Fire Resistant Accessories Door Loop Power Supply Release Button Notes
AC25
Motorised Locks
Solenoid Locks
Products conform to appropriate fire test requirements.
Electric Strikes 10
Escape Products for use on an escape door.
AC26-27 11
Note: We have made every effort to ensure that at the time of going to print all information shown in this catalogue is correct. However, in our efforts to continually improve our products and offer only the highest levels of security and quality we reserve the right to make alterations to the product specifications shown in this catalogue. All dimensions provided within this catalogue are approximate and for guidance only.
Key Control The products can be included in a key control system. 12
Guarantee Products are guaranteed for a period of time.
Magnetic Locks
Readers
Accessories AC2
Access Control - Motorised Locks W h a t Ty p e o f D o o r ? • A comprehensive range of locks for both exterior and interior solid timber doors.
Features and Functions Input Voltage All chubb motorised locks operate on a 12Vdc power supply.
T
Door Types T Solid Timber
Control Output The locks are permanently controlled by the control unit which supplies the open and close commands.
Auto Re-Lock
Monitored Bolt
If the door is in the closed position and has not been opened after an open command the bolt will automatically re-lock.
The bolt position is monitored to allow the control unit to identify the lock status.
Corrosion Resistant Successfully completed a 96 hour salt spray test.
Products carrying the CE mark comply to the requirements of the CE regulations.
Guarantee Guarantee period applicable when used with original Chubb Cylinders and maintenance instructions followed.
M Metal P PVCu Key Overide
• Can be used with outward opening doors.
At any time the bolt can be withdrawn or thrown by a key when a Euro profile cylinder is fitted to the lock.
Alignment Locator To make sure the bolt is always thrown into the strike, a special alignment locator is fitted to the lock faceplate and the strike.
What is Backset? Power Failure Mode Any loss of electrical power will leave the lock in one of two modes:
• This is the measurement from the edge of the door to the centre of the keyhole.
Fail Locked FL Door remains locked until power is applied. Fail Unlocked FU Door remains unlocked until power is applied.
Backset
Edge of door
Bolt Options SB
Anti-Side Load ASL This feature prevents pressure applied to the door being transferred to the bolt creating excess friction.
Swingbolt RTE Input DB
Deadbolt
A Request To Exit switch can be connected to the controller.
Finish: Chrome Plated Ideal for Use with: Keypad / Cardswipe / Proximity Readers.
▼ AC3
Access Control - Motorised Locks Motorised Locks
Control Unit
CMLC1
Page
AC6
Power Supply
CMLS1
Page
AC6
CMLD1
Page
AC6
CPS5
Page
AC25 AC4
Security Features
te an ar Gu
Co R e r ro sis sio ta n nt
Access Control
Features / Functions
Door Features
Finish Options
e
Standards
Bolt Throw Input Output Current Consumption Lock/Strike Automatic Key Monitored Power Other mm Volatge Voltage Peak Holding Alignment Re-Locking Overide Bolt Failure Mode Features
Case Depth
Case Face Plate Backset Width Width
32mm
29mm
30mm
20mm
●
82mm
25mm
30mm
50mm
●
White
Chrome
Motorised Locks CMLS1 Mortice Swing Bolt
●
●
5
40
12Vdc
4A
n/a
●
1 Sec.
●
●
FL
CMLD1 Mortice Dead Bolt
●
●
5
30
12Vdc
4A
n/a
●
1 Sec.
●
●
FL
ASL
Door Features
Features / Functions
Bolt Throw mm
Input Output Current Consumption Open Signal Open Close Voltage Voltage Peak Holding Input Command Command Output Output
Fault Signal Output
Other Features
●
BBF
RTE Input
Case Depth
Case Width
Case Height
55mm
125mm
85mm
●
80mm
330mm
330mm
●
Control Units CMLC1 Single Door Unit
●
5
N/A
12Vdc
12Vdc
4A
80mA
●
●
ACCS
●
Features / Functions
Bolt Throw Input Output Other mm Voltage Voltage Features
Current Ouput
Power Supply CPS5 Power Supply
●
1
N/A
240Vac 12Vdc
BBF
5A
Key: ASL = Anti -Side Load ACCS = Automatic Continuous Close Signal BBF = Battery Backup Function FL = Fail Locked
AC5
Access Control - Motorised Locks Motorised Locks CMLS1 Mortice Swing Bolt
• •
CMLD1 Mortice Dead Bolt
•
For use on single doors where bolt release is to be electronically controlled. Must be used with the controller unit.
•
CMLS1
CMLD1
CMLC1
●
●
●
Corrosion Resistant
●
●
Guarantee
5
5
Standards
For use on single doors where bolt release is to be electronically controlled. Must be used with the controller unit.
Security Features
151mm
111mm
111mm
Features/Functions
236.5mm
Bolt Throw (mm)
440mm
40mm
17mm
30mm
66mm
440mm
216mm
129mm
140
70mm
232mm
75mm
5
17mm
40
30
n/a
Input Voltage
12Vdc
12Vdc
12Vdc
Output Voltage
12Vdc
12Vdc
12Vdc
Peak Current Consumption Holding
4A
4A
4A
n/a
n/a
1
Lock/Strike Alignment
●
●
n/a
Automatic Re-locking
14mm
12mm
82mm
35mm 129mm
3mm 49mm
30mm
30mm 50mm
3mm
82mm 29mm
30mm
30mm
3mm
• • • •
n/a
●
n/a
Monitored Bolt
●
●
n/a
Power Failure Mode
FL
FL
n/a
Open Signal Input
n/a
n/a
●
Open Command Output
n/a
n/a
●
Close Command Output
n/a
n/a
ACCS
Fault Signal Output
n/a
n/a
●
ASL
BBF
n/a
n/a
●
Case Depth (mm)
32
82
55
Case Width(mm)
29
25
125
Face Plate Width (mm)
30
30
20
50
Other Features RTE Output
CMLC1 Single Door Unit Used for controlling the Motorised Locks. Option to run off of battery back-up in case of power failure Connection to Access Control Reader device available such as a keypad for external operation. Automatic Continuous Close Signal sent to the lock, and close signal sent after 8 seconds if the open command is sent but the door is not opened. Connection to request to exit button available for internal operation. Emergency status output. For connection to an external alarm device (eg a sounder).
1 Sec.
●
29mm
Control Unit • • •
1 Sec.
Key Overide
Door Features
85mm
Backset (mm) Chrome Finish Options
125mm
55mm
●
White Chrome
●
●
AC6
Access Control - Solenoid Locks Features and Functions
W h a t Ty p e o f D o o r ? • A comprehensive range of locks for both exterior and interior doors. T
M
P
Auto Re-Lock If the door is in the closed position and has not been opened after an open command the bolt will automatically re-lock.
Corrosion Resistant Successfully completed a 96 hour salt spray test.
Input Voltage All Chubb soleniod bolts operate on a 12Vdc power supply.
Monitored Bolt
Products carrying the CE mark comply to the requirements of the CE regulations.
The bolt position is monitored to allow the control unit to identify the lock status.
Guarantee Guarantee period applicable when used with original Chubb Cylinders and maintenance instructions followed.
Power Failure Mode Any loss of electrical power will leave the lock in one of two modes:
Door Types T Solid Timber
• Variants available for outward opening doors.
Escape The fail Unlocked version of this lock is ideal for use on escape doors if used with a micro switched panic bar.
M Metal
Fail Locked FL Door remains locked until power is applied. Bolt Options
Fail Unlocked FU Door remains unlocked until power is applied.
P PVCu
DB
Deadbolt
What is Backset?
LB
Latchbolt Key Overide
• This is the measurement from the edge of the door to the centre of the Tkeyhole. = Timber GP = Glass Panelled
At any time the bolt can be withdrawn or thrown by a key when a Euro profile cylinder is fitted to the lock. M=
P = PVCu
Power Rating The lock is continuously rated allowing the lock to be held in the constantly open position.
Backset
Edge of door
Finish:
Door Status
RTE Input
Built in Magnetic contact senses the door open / closed status for bolt re-locking.
A Request To Exit switch can be connected to the controller.
Chrome
Ideal for Use with: Keypad / Cardswipe / Proximity Readers.
▼ AC7
Access Control - Solenoid Locks Solenoid Bolts
Page
CSDB100 • CSDB100U
Power Supply
Page
CSLB200
AC9
Page
CPS3
AC9
AC25
Security Features
Standards
Finish Options
Door Features
ar Gu
Es
ca
an
pe
te
e
Co R e r ro sis sio ta n nt
Access Control
Features / Functions
Bolt RTE Throw Input (mm)
Input Voltage
Current Consumption Peak Holding
Power Rating
Open Signal Input
Automatic Re-Locking
Key Overide
Monitored Bolt
Power Failure Mode
Other Features
Case Depth
Case Face Plate Backset Width Width
Chrome
Solenoid Locks CSDB100 Mort. Solenoid D/Bolt
●
●
CSDB100U Mort. Solenoid D/Bolt
●
●
CSLB200 Mort. Solenoid L/Bolt
●
●
Key: FL = Fail Locked
22
●
12/24Vdc
3A/1.8A
250mA
C
●
1 Sec.
●
●
FL
35mm
22mm
25mm
25mm
●
1
22
●
12/24Vdc
3A/1.8A
250mA
C
●
1 Sec.
●
●
FU
35mm
22mm
25mm
25mm
●
1
16.5
●
12/24Vdc
3A/1.8A
250mA
C
●
6 Sec.
●
●
FL
35mm
22mm
25mm
25mm
●
1 ●
FU = Fail Unlocked C = Constant Security Features
Standards e te an ar Gu
o sis sio ta n nt Re
Finish Options
Door Features
Features / Functions
Input Volatge
Output Voltage
Other Features
240Vac
12Vdc
BBF
Current Output
Case Depth
Case Width
Case Height
White
250mm
215mm
●
Power Supply CPS3 Power Supply
●
5
3A
80mm
Key: BBF = Battery Backup Function AC8
Access Control - Solenoid Locks Solenoid Locks CSDB100 • CSDB100U Mortice Solenoid Deadbolt
• • • • • •
For use on a single door where bolt release is to be electronically controlled. Narrow style lock case. Connection to an access control reader device , such as a keypad, for external operation. Connection to a request to exit button for internal operation. CSBD100 - Fail Locked. CSBD100U - Fail Unlocked.
CSLB200 Mortice Solenoid Latch Bolt
• • • • •
CSDB100
CSDB100U
CSLB200
●
●
●
●
●
●
Standards
For use on a single door where bolt release is to be electronically controlled. Narrow style lock case. Connection to an access control reader device , such as a keypad, for external operation. Connection to a request to exit button for internal operation. Fail Locked.
Security Features Corrosion Resistant
●
Escape
Guarantee
1
1
1
Bolt Throw (mm)
20
20
18
RTE Input
●
●
●
Features/Functions
45mm
44.4
52mm
18mm
Input Voltage
45mm
320mm 22mm
160mm
21mm
44.4
52mm
320mm
160mm
21mm
18mm
12/24Vdc
12/24Vdc
3A/1.8A
3A/1.8A
3A/1.8A
Holding
250mA
250mA
250mA
Power Rating
C
C
C
Open Signal Input
●
●
●
1 Sec.
1 Sec.
6 Sec.
Key Overide
●
●
●
Monitored Bolt
●
●
●
Power Failure Mode
FL
FU
FL
Case Depth (mm)
35
35
35
Case Width(mm)
22
22
22
Face Plate Width (mm)
25
25
25
Backset (mm)
25
25
25
●
●
●
Automatic Re-Locking
16.5mm 94.6
94.6
230mm
230mm
2.5mm
Current Consumption
12/24Vdc
Peak
25mm 2.5mm
45mm
25mm
Other Features Door Features
45mm 25mm 35mm
25mm
25mm 35mm 25mm 22mm
Finish Options 22mm
Chrome
AC9
Access Control - Electric Strikes W h a t Ty p e o f D o o r ? • A comprehensive range of strikes for both exterior and interior doors. T
M
P
Features and Functions Holding Force A measurement is given (kg) for the amount of sideload an electric strike will take and hold the door locked.
Force Resistant Strong bolt design provides resistance to side load force.
Input Voltage All Chubb strikes operate on a 12Vdc power supply. Products carrying the CE mark comply to the requirements of the CE regulations.
Tamper Resistant When the door is locked, all fixings are hidden. Corrosion Resistant Successfully completed a 96hour salt spray test.
Release Operation Connection of a reader, such as a keypad, allows the strike to be released on entry.
Escape The fail Unlocked version of this strike is ideal for use on escape doors if used with a micro switched panic bar. Guarantee Guarantee period applicable when Chubb maintenance instructions are followed.
Door Types T Solid Timber M Metal P PVCu
Operation
Power Failure Mode
• When the strike is released it allows the door to be pushed, forcing the bolt of the strike to open.
Power Rating The strike is continuously rated allowing it to be held in the constantly open position.
Handing All Chubb strikes are reversible to suit either left or right handed doors.
Finishes: Dark Metallic Grey
Any loss of electrical power will leave the strike in one of two modes: Fail Locked FL Door remains locked until power is applied. Fail Unlocked FU Door remains unlocked until power is applied.
Brass
IDEAL FOR USE WITH: Mortice Locks, Rim Locks, Keypad / Cardswipe / Proximity Readers
▼ AC10
Access Control - Electric Strikes Electric Strikes
Page
CMES400 • CMES400U
Page
CRES100 • CRES100U
AC12
AC12
Security Features
Door Features
Finish Options
e te an
pe
Gu
ar
ca Es
R e F o rc sis e ta nt
Access Control
Co R e r ro sis sio ta n nt
Features / Functions T Re am sis pe ta r nt
Standards
Input Voltage
Current Consumption Peak Holding
Power Rating
Open Signal Input
C
●
Holding Force
Power Failure Mode
Other Features
Handing
Inward Opening
DMG
REV
●
● ●
Brass
Electric Strikes CMES400 Mort. Electric Strike
●
●
●
●
CMES400U Mort. Electric Strike
●
●
●
●
CRES100 Rim Electric Strike
●
●
●
●
CRES100U Rim Electric Strike
●
●
●
●
1 ●
●
12/24Vdc
300mA
300mA
400kg
FL
1
12/24Vdc
300mA
300mA
C
●
400kg
FU
REV
●
1
12/24Vdc
300mA
300mA
C
●
380kg
FL
REV
●
●
●
1
12/24Vdc
300mA
300mA
C
●
380kg
FU
REV
●
●
●
Key: FL = Fail Locked FU = Fail Unlocked REV = Reversible Handing C = Constant AC11
Access Control - Electric Strikes Electric Mortice Strikes
CMES400 CMES400U CRES100
CMES400 • CMES400U
• • • • • •
CRES100U
Standards
For use with a mortice latch. Continuously rated. For inward opening door applications. Metal shroud around release latch for tidy installation. CMES400 - Fail Locked. CMES400U - Fail Unlocked.
●
●
●
●
Force Resistant
●
●
●
●
Tamper Resistant
●
●
●
●
Corrosion Resistant
●
●
●
●
Security Features
30 mm
69 mm
30 mm
150 mm
Escape
Guarantee
●
● 1
1
1
1
Features/Functions 10 mm
16 mm
28 mm
Current Consumption
Electric Rim Strikes
12Vdc
12Vdc
12Vdc
300mA
300mA
300mA
300mA
Holding
300mA
300mA
300mA
300mA
C
C
C
C
Power Rating
CRES100 • CRES100U
• • • • •
12Vdc Peak
Input Voltage
For use with a rim nightlatch. Continuously rated. For inward opening door applications. CRES100 - Fail Locked. CRES100U - Fail Unlocked.
28 mm
Open Signal Input
●
●
●
●
Automatic Locking
1 Sec
1 Sec
1 Sec
1 Sec
Side Load Force Resistance
400kg
400kg
380kg
380kg
FL
FU
FL
FU
REV
REV
REV
REV
REV
REV
REV
REV
●
●
●
●
31 mm
Power Failure Mode Other Features Door Features 104 mm
40 mm 80 mm
106 mm
Handing Inward Opening
Finishes DMG 63 mm
47 mm
Brass
AC12
Access Control - Magnetic Locks Features and Functions
D o o r Ty p e s
Fixing Types Surface Mount Magnet is fixed to the door transom. Flush Mount Magnet is morticed into the door and frame or transom. Single Door
Corrosion Resistant Successfully completed a 96hr salt spray test.
Input Voltage Single voltage units accept a 12Vdc power supply. Dual voltage units accept either a 12Vdc or 24Vdc power supply.
Products carrying the CE mark comply to the requirements of the CE regulations.
Escape The Magnetic Locks are ideal for use on escape doors if used with a micro switched panic bar.
Guarantee Guarantee period applicable when Chubb maintenance instructions are followed.
Single Door with Full Width Housing
Power Failure Mode Any loss of electrical power will leave the magnet in the fail unlocked state.
Fixing Brackets A range of brackets and accessories are available to suit most applications.
Double Door
Z & L Brackets for inward opening applications.
Installation Options Outward Opening
Outward Opening
Frame
Frame
100mm wide
75mm wide
Monitoring Magnets are available in two states:
Door
Outward Opening Adjustable transom bracket
Frame
Door
Inward Opening
Unmonitored U No signal is available to show the status of magnet.
Frame
50mm wide
Door
Monitored M A 2 wire output from a 24v, 1amp volt free change over contact allows a signal to be sent to a relay or control device to show that the magnet is in the fully locked or unlocked state (hall effect).
Z bracket
Finishes:
Holding Force A measurement is given (in kgs) for the amount of direct force a magnetic lock will take and hold the door locked.
Adjustable Transom Bracket for applications with a narrow frame or no frame reveal.
Satin Silver Anodised
Door
IDEAL FOR USE WITH: Keypad / Cardswipe / Proximity Readers
▼ AC13
Access Control - Magnetic Locks Magnetic Locks - Surface Mounted
Page
CM1SSU • CM1SSM
AC16
Page
CM1DSU • CM1DSM
AC16
CM2DSU-2M • CM2DSM-2M
AC17
Page
Magnetic Locks - Surface Mounted
CM2SSU-1M • CM2SSM-1M
Page
AC16
CM3SSU • CM3SSM
Shear Locks - Flush Mounted
Page
AC17
CM4SSM • CM4SFM
Page
AC17 AC14
Access Control - Magnetic Locks
Security Features
Standards
Finish Options
Door Features
ar Gu
Es
ca
an
pe
te
e
Co R e r ro sis sio ta n nt
Access Control
Features / Functions
Holding Force (kg)
Monitoring Type Monitored Unmonitored
Input Voltage
Current Consumption (Per Coil) Peak Holding
Power Failure Mode
Fixing Type Surface Flush
Case
Case Length
Case Height
Satin Silver Anodised
Magnetic Locks CM1SSU1M Single Magnet
●
●
●
5
Up to 310
CM1SSM Single Magnet
●
●
●
5
Up to 310
CM1DSU2M Double Magnet
●
●
●
5
Up to 310
CM1DSM Double Magnet
●
●
●
5
Up to 310
CM2SSU-1M Single Magnet
●
●
●
5
Up to 310
CM2SSM-1M Single Magnet
●
●
●
5
Up to 310
CM2DSU-2M Double Magnet
●
●
●
5
Up to 310
CM2DSM-2M Double Magnet
●
●
●
5
Up to 310
CM3SSU Single Magnet
●
●
●
5
Up to 630
CM3SSM Single Magnet
●
●
●
5
Up to 630
CM4SSM Single Shear Magnet
●
●
●
5
CM4SSM Single Shear Magnet
●
●
●
5
●
12Vdc/24Vdc
250mA/500mA
250mA/500mA
FU
●
280mm
33mm
44mm
●
12Vdc/24Vdc
250mA/500mA
250mA/500mA
FU
●
280mm
33mm
44mm
●
12Vdc/24Vdc
250mA/500mA
250mA/500mA
FU
●
540mm
33mm
44mm
●
12Vdc/24Vdc
250mA/500mA
250mA/500mA
FU
●
540mm
33mm
44mm
●
12Vdc/24Vdc
250mA/500mA
250mA/500mA
FU
●
1000mm
33mm
44mm
●
12Vdc/24Vdc
250mA/500mA
250mA/500mA
FU
●
2000mm
33mm
44mm
●
12Vdc/24Vdc
250mA/500mA
250mA/500mA
FU
●
2000mm
33mm
44mm
●
12Vdc/24Vdc
250mA/500mA
250mA/500mA
FU
●
2000mm
33mm
44mm
●
12Vdc/24Vdc
250mA/500mA
250mA/500mA
FU
●
267mm
73mm
40mm
●
●
12Vdc/24Vdc
250mA/500mA
250mA/500mA
FU
●
267mm
73mm
40mm
●
Up to 1000
●
12Vdc/24Vdc
900mA/1200mA
450mA/280mA
FU
180mm
30mm
25mm
●
Up to 1000
●
12Vdc/24Vdc
900mA/1200mA
450mA/280mA
FU
180mm
30mm
25mm
●
● ● ● ● ● ● ● ●
● ●
Key: FU = Fail Unlocked
AC15
Access Control - Magnetic Locks Magnetic Locks - Surface Mounted CM1SSU • CM1SSM
• • • •
For use on single doors.
• • •
Dual voltage capability.
CM1SSU/M
CM1DSU/M
CM2SSU-1M/M
●
●
●
Corrosion Resistant
●
●
●
Escape
●
●
●
Guarantee
5
5
5
Up to 310
Up to 310
Up to 310
Monitored
●
●
●
Unmonitored
●
●
●
12Vdc/24Vdc
12Vdc/24Vdc
12Vdc/24Vdc
250mA/500mA
250mA/500mA
250mA/500mA
250mA/500mA
250mA/500mA
250mA/500mA
FU
FU
FU
●
●
●
Case Length (mm)
280
540
1000
Case Height (mm)
33
33
33
Case Depth (mm)
44
44
44
●
●
●
Standards
Surface mount (super mini) design. Suits Inward and outward opening doors.
Security Features
33
272
Variable cable entry position. 44
44
40
CM1SSU - Unmonitored. CM1SSM - Monitored.
12
Features/Functions
CM1DSU • CM1DSM
• • • •
Hoding Force (kg)
• • •
For use on double doors. Surface mount (super mini) design. Variable cable entry position.
Dual voltage capability.
Monitoring Type
CM1DSU - Unmonitored. CM1DSM - Monitored.
Suits Inward and outward opening doors.
Input Voltage 33
540 44
44
Peak Current Consumption (Per Coil)
Holding
40
Power Failure Mode
40 12
Other Features
12
Door Features
CM2SSU-1M • CM2SSM-1M
Surface
• • •
For use on single doors.
•
Suits Inward and outward opening doors.
• •
CM2SSU - Unmonitored.
Flush
Surface mount (super slim) design. 1m housing length for full door width fitting. 33
1000
44
44
Finish Options
CM2SSM - Monitored. 40
Satin Silver Anodised 12
AC16
Access Control - Magnetic Locks Magnetic Locks - Surface Mounted CM2DSU-2M • CM2DSM-2M
• • •
For use on double doors.
•
Suits Inward and outward opening doors.
• •
CM2DSU-2M - Unmonitored.
CM3SSU/M
CM4SSM/FM
●
●
●
Corrosion Resistant
●
●
●
Escape
●
●
●
Guarantee
5
5
5
Up to 310
Up to 630
Up to 1000
Monitored
●
●
●
Unmonitored
●
●
12Vdc/24Vdc
12Vdc/24Vdc
12Vdc/24Vdc
250mA/500mA
250mA/500mA
900mA/1200mA
250mA/500mA
250mA/500mA
900mA/1200mA
FU
FU
FU
●
●
CM4SSM
Standards
33
2000
Surface mount (super slim) design. 2m housing length for full door width fitting.
CM2DSU-2M/M
Security Features 44
44 40
40 12
12
CM2DSM-2M - Monitored.
CM3SSU • CM3SSM
• • • •
For use on single doors.
• •
CM3SSU - Unmonitored.
Features/Functions Hoding Force (kg)
40
267
Surface mount (super power) design. Unmonitored.
73
73
Suits Inward and outward opening doors.
Monitoring Type
Input Voltage
CM3SSM - Monitored.
Peak Current Consumption (Per Coil)
63
Holding
12
Power Failure Mode Other Features
Shear Locks - Flush Mounted
Door Features
CM4SFU • CM4SFM
• •
Flush mount (shear force) design for improved holding force (1000kg of shear force).
•
Suitable for Inward or outward opening doors or bi-directional doors.
•
Can be fitted in the horizontal or vertical axis.
• •
Surface
For use on single or double doors.
CM4SSM - Surface Mount. CM4SFM - Flush Mount.
163mm
25mm
30mm
163mm
25mm
CM4SFM
Flush Case Length (mm)
2000
267
163
Case Height (mm)
33
73
30
Case Depth (mm)
44
40
25
●
●
●
Finish Options 30mm
Satin Silver Anodised
AC17
Access Control - Magnetic Locks Magnetic Lock Brackets & Accessories Z and L Brackets
•
Suitable for use on inward opening doors.
A
Z Bracket
A
CZB1 CZB3 B
• •
D
B
190mm 50mm 190mm 75mm
C
D
50mm 100mm 75mm 150mm
CZB1 - For use with CM1 and CM2 magnets. CZB3 - For use with CM3 magnets.
C A
L Bracket CLB1 CLB3
A B 250mm 50mm 266mm 75mm
C 38mm 38mm
B
• •
CLB1 - For use with CM1 and CM2 magnets. CLB3 - For use with CM3 magnets.
C
Adjustable Transom Bracket
• •
Accessories A d j u s t a b l e Tr a n s o m B r a c k e t CADJTB for CM1, 2+3
Bracket allows adjustable positioning of the magnet. Suitable for applications witha flush door and a frame with little or no reveal.
A B 266mm 50mm
C 38mm
•
Adhesive for glass mounting. (CMADHESIVE) (CMACTIVATOR)
C
B
A
AC18
Access Control - Readers Features and Functions Non Volatile Memory This means the programmed information in the reader is retained in the event of power loss.
Reader Systems Cardswipe Reader Pre-encoded magnetic stripe cards control access. Keypad
Tamper Resistant Security screws and anti-tamper switches help secure the units.
Products carrying the CE mark comply to the requirements of the CE regulations.
Corrosion Resistant Successfully completed testing to ISP53 weather protection. Guarantee Guarantee period applicable when used with original Chubb cards, tags and maintenance instructions followed.
Push button coded entry controls access. Proximity Reader Pre-encoded cards or tags placed near the reader control access. Programming Method
Programming the readers is achieved via the keypad or with use of the program card.
Input Voltage All chubb Readers operate on a 12Vdc power supply.
Hierarchy
Hold Open The reader can send an output signal to hold the door in the open position for a required length of time.
RTE Input Connection of a Request to Exit switch will allow for instant egress operation without the use of a card, code or tag.
There are two levels of operation: Master The reader operates stand alone. Slave The reader is ‘dumb’ and requires connection to a master controller.
Finishes: Dark Metallic Grey
Status Display Visual Display LED’s show the status of the reader. Audible Display Tones announce the status of the reader.
Alarm Output The connection of a warning device (a bell) allows the output to trigger it in the event of an alarm status.
Number of Users Each system has a limit of programmable codes for users.
Power Failure Mode Capability Readers can support fail locked and fail unlocked systems.
Dark Grey
IDEAL FOR USE WITH: Motorised Locks, Solenoid Locks, Electric Strikes, Magnetic Strikes.
▼ AC19
Access Control - Readers Keypads
CEK200
Page
AC22
Proximity Reader
CPX100
Card readers
CIK100 • CSK150
Page
AC22
CMC400 • CSC450
Page
AC23
C a r d s a n d Ta g s
Page
AC23
CPX10UCP • CPX10MC • CPX10T • CICP • CUCP • CCPC
Page
AC24 AC20
Access Control - Readers
Security Features
Standards
Access Control Keypad CEK200 CIK100
External Keypad
●
Internal Keypad
●
CSK150* Slave Keypad
●
●
Door Features
Features/Functions
Doors Controlled Single Multi
Number Hierachy Programming Input Hold RTE Alarm Lock release Status Current Power Failure Retentive Incorrect Door Reader of Users Master Slave Visual Audible Compatability Memory Code Contact Range Time Method Voltage Consumption Open Input Output Peak Hold Output FL FU Output Keypad Card Lockout Monitoring
5
●
4 codes
●
●
5
●
4 codes
●
●
●
5
●
4000
●
●
●
Finish Options
DMG
12Vdc 40mA 40mA 12Vdc
●
●
●
●
●
●
●
●
3, out
Contact
●
12Vdc 40mA 40mA 12Vdc
●
●
●
●
●
●
●
●
3, out
Contact
●
●
12Vdc 90mA 90mA
●
●
●
●
●
●
3, out
Contact
●
●
12Vdc 40mA 40mA 12Vdc
●
●
●
●
●
●
3, out
Contact
●
●
12Vdc 30mA 30mA 12Vdc
●
●
●
●
●
●
3, out
Contact
●
●
12Vdc 200mA200mA 200mA
●
●
●
●
●
n/a
DG
Cardswipe CMC400 Card Reader
●
●
●
5
●
10
4000
CSC450* Slave Card Reader
●
●
●
5
●
10
4000
●
5
●
● ●
Proximity CPX100
Proximity Reader
●
2000
●
●
●
6, out
●
Up to 20cm
●
* N o t e - F e a t u r e s & F u n c t i o n s w h e n c o n n e c t e d t o a M a s t e r r e a d e r. F o r i n f o r m a t i o n o n C a r d s a n d Ta g s s e e p a g e A C 2 4 .
AC21
Access Control - Readers Keypads CEK200
• •
CEK200
CIK100
CSK150
●
●
●
Standards
Ideal for External and Internal use. Robust design with hardwearing
Security Features
stainless steel buttons.
• •
Weather protected to IP53 rating.
Corrosion Resistant
●
Tamper Resistant
●
Guarantee
5
5
5
4 codes
4 codes
4000
●
●
●
●
●
Input Voltage
12Vdc
12Vdc
12Vdc
Peak Current Consumption Holding
40mA
40mA
90mA
40mA
40mA
90mA
Hold Open Output
12Vdc
12Vdc
n/a
RTE Input
●
●
●
Alarm Output
●
●
128 mm
low current option available for powering from batteries.
41mm
●
70mm
Features/Functions Number of Users
CIK100
•
Ideal for Internal use or in areas sheltered from the weather.
• •
Hardwearing zinc alloy casing.
Master
Hierachy
Low current option available for powering from batteries.
128 mm
70mm
●
●
●
●
●
Audible
●
●
●
Power Faliure Fail Locked Compatability Fail Unlocked
●
●
●
●
●
●
Retentive Memory
●
●
●
3, out
3, out
3, out
Contact
Contact
Contact
●
●
●
●
●
●
Status Supply
CSK150
•
Slave keypad for use with the CMC400 to give the added secuity of the requirement for both a card and code on entry.
●
Visual
Lock Release Time Ouput 41mm
•
●
Slave Programming Keypad Method Card
Incorrect Code Lockout Door Contact Monitoring Reader Range
Hardwearing zinc alloy casing.
128 mm
Door Features Single
Doors Controlled
Multi
Finish Options 41mm
70mm
DMG DG
AC22
Access Control - Readers Card Readers CMC400
•
Ideal for Internal use or areas sheltered from the weather.
• •
Pr-wired cable with reader for easy fit.
•
Master card reader (built in controller).
CMC400
CSC450
CPX100
●
●
●
Corrosion Resistant
●
●
Tamper Resistant
●
Guarantee
5
5
5
4000
4000
2000
Standards
35 mm
Security Features
Simple programming from cards, no need for programming devices or centrally controlled computers. 128 mm
125 m
128 mm
Features/Functions
50 mm
38 mm
Number of Users
CSC450
• •
Slave card reader (requires connection to a controller, such as the CMC400).
•
Ideal for Internal use or areas sheltered from the weather. Gives cost effective card swipe access from both sides of a door when linked with the CMC400.
Master
Hierachy
●
Programming Keypad Method Card
35 mm
128 mm
125 m
● ●
Slave
Ideal for Internal use or areas sheltered from the weather.
●
● ●
●
Input Voltage
12Vdc
12Vdc
12Vdc
Peak Current Consumption Holding
40mA
40mA
200mA
30mA
30mA
200mA
Hold Open Output
12Vdc
12Vdc
200mA
128 mm
●
RTE Input
●
Alarm Output ●
●
●
Visual
●
●
●
Audible
●
●
●
Power Faliure Fail Locked Compatability Fail Unlocked
●
●
●
●
●
●
Retentive Memory
●
●
3, out
3, out
6, out
Contact
Contact
Up to 20cm
●
Lock Release Time Ouput Status Supply
50 mm
38 mm
Proximity Reader CPX100
• • •
Incorrect Code Lockout
●
Door Contact Monitoring
Ideal for external and Internal use. Pre-wired cable with reader for easy fit. Simple programming from cards, no need for programming devices or centrally controlled computers.
•
Master Proximity reader (built in controller).
•
Includes ‘start up’ quantity of Master and User Cards/tokens.
86mm 60mm
Reader Range
15mm
Door Features
86mm
Doors Controlled
Single
●
●
Multi
10
10
●
●
Finish Options DMG DG
●
AC23
Access Control - Readers Card Reader Cards Cards are availabe in packs for the CMC400 and CSC450 Initialisation Pack CICP
This pack consists of two identical cards used to initialise the reader after installation. The card can be swiped through multiple readers enabling them to function as an integral system. User Card Pack CUCP
This pack consists of one program card and a set of user cards. Swiping the program card through a reader validates all the user cards in the pack. Cards are available in pack sizes of 20 or 50 cards. In every pack, a user card has a corresponding shadow card. As user cards are issued, the user identification is written on the shadow card and stored in a safe place. Swiping a shadow card eliminates its corresponding user card from the reader. Useful when a user card is lost or stolen. Control Card Pack CCCP
This pack of cards extends the flexibility of the system and is needed for the following functions; Hold open, Lock open time 10 seconds, Lock open time 4 seconds, Fail Locked/Fail Unlocked, Mute, Keypad code settings (for slave keypad when used with a master card reader), and Card Reader and keypad (to allow the master card reader to operate alongside a slave keypad, only allowing entry with the correct card and access code).
Proximity Reader Cards and Tags CPX10UCP • CPX10MC • CPX10T
The reader is supplied with 10 user cards or tokens and 2 master cards for programming. Additional Cards or Tags are available for the CPX100 (Sold individually).
Notes
AC24
Access Control Accessories Accessories Release Button CRB
• •
Power Supply CPS3 • CPS5
Door Loop CDL
• •
Used for remote release of the motorised locks. Red/Green light signal of lock status.
Used to connect frame mounted units to the motorised locks. Mortice casing for added protection with flexible stainless steel spring for wiring.
CPS3
• Used to power the Solenoid locks. • 3A current output. CPS5
25mm
83mm
• Used to power the Motorised locks. • 5A current output.
55mm
•
95mm
Both models have built in accommodation for backup battery to supply temporary power in cases of mains failure.
330mm
17mm
Security Features
te an ar Gu
es osi ist on an t
Access Control
Features / Functions
Door Features
Finish Options
e
Standards
Input Voltage
Output Voltage
Other Features
Current Output
Case Depth
Case Width
Case Height
White
Chrome
Accessories CRB Release Button
5
240Vac
CDL Door Loop
10
12Vdc
12Vdc
LSL
● ●
CPS3 Power Supply
●
5
240Vac
12Vdc
BBF
3A
80mm
250mm
215mm
●
CPS5 Power Supply
●
5
240Vac
12Vdc
BBF
5A
80mm
330mm
330mm
●
Key: L S L = L o c k S t a t u s L i g h t s ( R e d / G r e e n ) B B F = B a t t e r y B a c k u p F u n c t i o n AC25
