Transcript
CineCurve The CineCurve features a native 2.40:1 image area allowing full enjoyment and flexibility when watching movies in super-wide screen formats, and masks to conform to HDTV and NTSC TV formats
CineCurve Many Hollywood blockbusters are produced in formats such as Cinemascope where the movie is 2.35 times wider than it is high. When watching this aspect ratio on a 16:9 screen, 33% of the pixels are used to create annoying black bars, therefore reducing your image resolution. Designed for use with an anamorphic lens, the CineCurve features a native 2.40:1 image area allowing full enjoyment and flexibility when watching movies in super-wide screen formats. Maintaining a constant vertical height, two electronically controlled masking panels glide in from the left and right to create the perfect image area when viewing different types of media or movies filmed in various aspect ratios. The CineCurve is available with any of Stewart’s front or rear projection materials. Depending on screen size, a specialized snap-fastening or lace & grommet system ensures a smooth and perfectly tensioned screen surface. Our VeLux™ appliqué finish absorbs over-scan and increases perceived contrast.
SPECIFICATIONS Curved aluminum extrusion frame Vertical masking panels VeLux™ appliqué finish Specialized snap-fastening or lace & grommet system
Included Included Included Included
MATERIAL Front projection material Rear projection material
Included Optional
Continuously variable, attaining any aspect ratio from 2.40:1 (native aspect ratio) down to 1.33:1. Vertical side panels glide in from the left and
PERFORATIONS
right to create the perfectly masked image area.
Microperf X2 Acoustically transparent masking panels
Optional Optional
MOTORS (2 motors) 120 Volt 220 Volt
Included Optional
A B
B
CONTROL B.R.I.C. (binary reciprocal intelligent control) *Includes IR remote and key pad MOUNTING Wall mount Aperture FRAME DIMENSIONS Height Width
Included
Included Optional Image Height + (2 x A) * Image Width + (2 x B) *
* See chart for A and B values. Also, VeLux™ option adds .125 to frame o.d.
Maximum Image Size (in 2.4:1 mode)
A Fascia Dimensions
Height
Width
Diagonal
Attachment System
A
B
60"
144"
156"
Snapper Style
6"
7"
Can be wall or aperature mounted
Notes
72"
173"
187"
Lace & Grommet
7"
9"
Cannot be wall mounted without weight bearing support (i.e. pony wall)
90"
216"
234"
Lace & Grommet
10"
12"
Cannot be wall mounted without weight bearing support (i.e. pony wall)
>90"
>216"
Side Fascia (B) increases 1" for each additional 4" of masking travel. Consult with Sales Engineer for exact dimensions/specifications
*Made under U.S. patent 7,710,646 by Stewart Filmscreen Corporation
Find your local representative at www.stewartfilmscreen.com/reps 1161 Sepulveda Blvd Torrance CA 90502 USA 800.762.4999 l Tel: 310.784.5300 l Fax: 310.326.6870 | Email:
[email protected] l www.stewartfilmscreen.com © Stewart Filmscreen Corporation, specifications are subject to change without notice. 05.21.10
