Preview only show first 10 pages with watermark. For full document please download

Cint Interface Modules Comat

   EMBED


Share

Transcript

Interface modules 12 14 LABEL LABEL RELAY MODULE MODULE 6-24 V V A1 A1 A2 A2 SOCKET 6-24 A2 Relay module CINT-R1/CINT-R2 A1 A2(–) COIL Solid-state module CINT-R5/CINT-R8 (+) MADE IN EC A1 RELAY NC 12 CINT 1/ UC 6-24 VU COMAT SOCKET 14 12 11 11 Max. 6A 250V (see module) COM 11 01 A1(+) 12 11 (+) RELAY RELAY CINT12/UC24V 14 NO OUT 14 01 CINT- R2 / UC 24 VU CINTKk With srcew terminals (0,2-2,5mm 2) CINT-11, -12, -15, -18 14 A2 11 12 SOCKET With cage clamp terminals (1x 0,2 - 2,5 mm 2) CINT-21, -22, -25, -28 6,2 CINT-11, CINT-21 Interface module Complete with integrated LED and switching module MAX MIN CINT-12, CINT-22 CINT-15, CINT-25 CINT-18, CINT-28 Interface module Interface module Interface module Interface module for PLC’s and process control. High power contact AgSnO2. With screw terminals (CINT-11) or cage clamp terminals (CINT-21). for PLC’s and process control. Signal contact AgNi +5µ Au. With screw terminals (CINT-12) or cage clamp terminals (CINT-22). for PLC`s and process control. DC solid-state switch NO, pnp. Integrated transient clamp circuit. For fast and high frequency switching. With screw terminals (CINT-15) or cage clamp terminals (CINT-25). for PLC`s and process control. AC solid-state switch type NO synchronous switching triac. For fast and high frequency switching. With screw terminals (CINT-18) or cage clamp terminals (CINT-28). 10A250 6A 250VVAA 10A250 6A 250VVAA 10A24250 2A V DV A 10A250 2A 250VVAA 10 mA 12 V 1mA 1V 1mA 6V 10mA 12V Technical data Contact material Switching power AC1 Switching power DC1 Switching power AC15 Peak inrush current Switching cycles: mechanical/electrical Contact resistance / voltage drop Isolation AgSnO 2 1500VA ...250W 300VA/230V 100 A/2,5 ms 10 x106 /105 <100mΩ 3600Vrms AgNi + 5µ Au 1500VA ...250W – 10A/20ms 10x106 /105 <100mΩ 3600Vrms Solid-state – ...60W – 20A/10ms – <100mΩ /200mV 2500Vrms Solid-state (Triac) 500VA – – 20A/10ms – <1,5V 2500Vrms Operation voltage AC50/60Hz / DC Power consumption Pmax. 24V Power consumption Pmax. AC230V On delay / release time Temperature: operating/storage 0,8...1,2UN 240mW 1,1W 5 ms/10 ms -20...+55 °C /-40...+85 °C 0,8...1,2UN 240mW 1,1W 5ms/10ms -20...+55°C/-40...+85°C 0,7...1,25Un 240mW – <1ms -20...+55°C/-40...+85°C 0,7...1,25Un 240mW – <1ms -20...+55°C/-40...+85°C 24, 230 CINT-12/UC.....V CINT-22/UC.....V CINT-R2/UC110-240V CINT-R2/UC24V Connector bridge CINT- BR20 12 88,5 Connector bridge CINT- BR20 (packing unit: 10 pieces) A1 31,5 A1 17,5 (packing unit: 64 pieces) With srcew terminals 23,7 Marking label CINT- BEZ 14 TS 35 14 Marking label (supplied with standard delivery) CINT- BEZ 12 93,5 11 29.5 Module d’interface CINT-21/ UC 24 V CINT-R8/DC 24V 11 35,3 Ordering example CINT-R5/DC24V With cage clamp terminals 44 CINT-R1/UC110-240V CINT-R1/UC24V CINT-18/DC 24V CINT-28/DC 24V 44 Module solid-state CINT-15/DC24V CINT-25/DC24V 17,5 ≤ 10% TS 35 DC 35,3 50/60 Hz / 24, 230 CINT-11/UC.....V CINT-21/UC.....V 23,7 UC Ordering N0. A2 A2 Replacement relay CINT- R1/ UC 24 V 3,4 6,2 3,4 52 72,8 6,2 52 72,8 This issue replaces all previous issues. Availability, errors and specifications subject to change without notice. Kühn Controls AG, Gräfenhäuser Str. 14, D-75305 Neuenbürg, Tel.:+49 (0)7082-940000, Fax:+49 (0)7082-940001, www.multicomat.net Tb CINT / 4.04 E