Transcript
Circuit Charger 7120-70 Power Bank Instruction Manual
ON/OFF
USB output 1 Power Percentage Micro-USB input USB output 2 USB/Micro-USB cable
LED Indicator • Charging indicator: Four blue LED lights will turn on and off one by one. • Full Charge indicator: The four blue LED lights will all light up. • Power Percentage: The blue LED lights will light up and down depending on the amount of battery life remaining.
How to use the Circuit Charger 1. Charging the Circuit Charger Power Bank Connect the (provided) USB Cable to a USB wall adapter. Connect the opposite end of the cable (Micro-USB) into the power bank’s Micro-USB input port. Connect the USB cable to a USB port located on a computer. Connect the opposite end of the cable (Micro-USB) into the power bank’s Micro-USB input port. 2. When charging a mobile device, it is recommended that you use an approved cable or the one provided with the mobile device at purchase. The power bank has a maximum output of 2100mA. Use the USB outputs to charge the desired device. Connect the Micro-USB end of the cable to your device. Connect the opposite end to the power bank by using the USB ouput ports.
Tech Specifications Parameters
Index
Input
DC 5V/1000mA
Max. Input
DC 5.3V/1000mA
Output
DC 5V/1000mA, DC 5V/2100mA
Capacity
4400mAh
Model #
SP827
Important Safety Precautions Please note the following precaustions before usage. Failure to comply may be dangerous and damage your mobile devices. 1.
Do not charge the Circuit Charger Power Bank while using the power bank to charge a device.
2. Use only 5V charger with a max output of 2.1A. 3. Power banks are not allowed in checked luggage on commercial flights. Carry-on only. 4. Do not use if dropped, handled roughly or damaged in any way. 5. Do not use if product becomes too hot or shows signs of overheating. 6. Do not charge the power bank for more than 4-6 hours and do not leave unattended.
Notes:
Made in China
