Preview only show first 10 pages with watermark. For full document please download

Cl3660umpsu Wirefree Module Interface

   EMBED

Share

Transcript

Model: Outdoor Station CL3660UM Unlock Module Interface Compatible with CL3622 and CL6011 Door Intercom Systems 12VDC 12VDC + 12VDC– The CL3600UM Unlock Module provides a pair of dry contacts which can be set to ‘normally open’ or ‘normally closed’ dependent upon the application of the product/operational needs. Power Supply Output: +12V DC 300mA Lock + GND PGND Power CTRL SGND Unlock Module Interface NO/ NC Contacts (Max. rating 240V 10A) For activating devices, e.g. Lock Module Lock– Note: The Unlock Module Interface does not provide power for a door lock module, or any other external device. These will need to be powered separately. Installation Instructions 1. Remove Cover Plate. 2. Wire as shown in the diagram opposite*. 3. Trigger duration can be set to between 1 second (minimum) and 10 seconds (maximum) based on operational needs. Turn timer adjustment control anti-clockwise to reduce the trigger duration and clockwise to increase duration. 4. Test, following the operating instructions below and adjust trigger duration if required. 5. Replace Cover Plate and mount Unlock Module Interface in the desired location. 6. When using an external power supply unit to power the outdoor station, the batteries inside the outdoor station must be removed before connecting the power supply. Operating Instructions 1. To activate the Unlock Module during a conversation over the intercom on the CL3662 depress the key on the handset, for the CL6011 depress the key on the handset. NO/NC Switch * Note: this diagram supersedes that shown in the Door Intercom System instruction manual. Timer Adjustment Control Telephone Helpline: 0345 257 1000 Lines open 09:00 to 17:00 Monday to Friday Response Electronics Limited, Roman House, Lysons Avenue, Ash Vale, GU12 5QF www.responseelectronics.com CL3660UM Ed.5