Cl408/412 Parts List

Transcript

CL408/412 Parts List SATO America, Inc. 10350-A Nations Ford Rd. Charlotte, NC 28273 Tel (704) 644-1650 Fax (408) 644-1661 P/N 9001036 REV. C Copyright 1996 SATO America, Inc. Charlotte, NC 28273 All rights reserved. No part of this document may be reproduced or issued to third parties in any form without the express permission of SATO America, Inc. The materials in this document are provided for general information and are subject to change without notice. Sato America, Inc. assumes no responsibility for any errors that may appear. CL408 Description Page # Base Cover Assembly 4-10 Frame Assembly 11-13 Thermal Head Assembly 14-16 Ribbon Assembly 17-20 Main PCB Assembly 21-21 Serial Port Option 22-22 Parallel Port Option 23-23 Memory Card Assembly (Option) 24-24 Dispenser Assembly (Option) 25-29 Cutter Assembly (Option) 30-30 CL408/412 Base Cover Assembly Description Qty Base frame, Use for S/N 61273050 and Lower Rubber foot Center frame Pan head screw Lid Pan head screw Roller bracket Roller (3.1x8x16) Post Gear (1x34) E-snap ring Pan head screw Post Tension bracket Shaft (Tension roller) Spring (Tension) Tension roller Pan head screw Pan head screw Hex nut E-snap ring PCB bracket Pan head screw Rear cover Pan head screw Memory card cover Pan head screw Lid Nylon rivet Cuide plate Pan head screw Unwind bracket Stopper spring Label stopper P-tight screw Plain washer Pan head screw Motor bracket, Use for S/N 61273050 and Lower Pan head screw Motor pulley, CL408 only 1 4 1 5 1 4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3 1 2 1 6 1 2 1 2 1 4 1 1 1 1 1 4 1 2 1 Item # Part Number 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 PR3770400 PT6680100 PZ0770200 MD4401021 PA1771000 MD4300621 PE1770200 PE3770100 PB0770100 PE8770100 ND0040030 MD4401021 PB0770400 PA3741800 PB0740900 PC0740100 PE3720100 MD4401021 MA0301421 MT1300522 ND0040030 PA1772200 MD4300621 PZ0770100 MD4300621 PE6770800 MD4300621 PH3683802 PT9520100 PA1772100 MD4300621 PA1773500 PA4520300 PE1720300 MH0300821 NA1030022 MD4300621 PA1773300 MD4401021 PL1770100 4 CL408/412 Base Cover Assembly Description Item # Part Number 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 64 65 66 67 68 69 71 72 73 74 76 77 78 79 80 81 82 83 MJ1400524 RH1770300 MD3401221 PA1771400 PE6770200 MD4300621 PZ0770400 PT3770100 MH1300821 MA1300622 PE6770400 PR7770500 PE6770300 MH0300821 PZ0770300 PR1340500 PA1773000 MH0300821 PR3770100 PH2720100 MT1300522 NA1030022 MD4300621 PA1772900 MD4300621 PH1770100 MD4300621 KA500631A MD4300821 RH1770000 RH1770600 RJ1771700 RH1770500 PE6770600 MD4300621 PE6770700 PR7770300 PR7770400 PA1774300 PA6685400 W-point screw Stepping motor Pan head screw Plate nut Connector cover Pan head screw Front cover Hinge P-tight screw Flat head screw Lens Front cover SET Switch button P-tight screw Logo plate Anti static brush Latch bracket P-tight screw Cover RH Window Hex nut Plain washer Pan head screw Sensor slit Pan head screw Cover LH Pan head screw Power supply unit (115V) Pan head screw POW 1 cable POW 2 cable KB PCB assy (115V) KB cable set KB protector Pan head screw Cable protector Motor pulley Assy, CL408 only Guide roller Lid Nut plate 5 Qty 2 1 4 1 1 1 1 2 4 4 1 1 1 2 1 1 1 2 1 1 2 2 2 1 1 1 4 1 3 1 1 1 1 1 3 1 1 1 1 1 CL408/412 Base Cover Assembly Description Qty Pan head screw Sensor slit P-tight screw Fuse (250V 3.15A) Pan head screw Motor pulley Assy, CL412 only Motor pulley, CL412 only Base Frame, Use for S/N 70172001 and Higher Motor Bracket, Use for S/N 70172001 and Higher Plain Washer 2 1 1 1 2 1 1 1 1 2 Item # Part Number 84 85 86 87 88 89 90 91 92 93 MD3201221 PA1772900 MH0300821 HD100321A MD4300621 PR7771100 PL1770200 PR3770500 PA2770200 NA1030022 6 CL408/412 Base Cover Assembly 7 CL408/412 Base Cover Assembly 8 CL408/412 Base Cover Assembly 9 CL408/412 Base Cover Assembly 10 CL408/412 Item # Part Number 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 PA1772700 MD4300621 MD3401021 PA1772800 MD4300621 MD4401021 PD1770100 MD4401021 PA1773100 PB2770200 PC1770100 MD4301422 PE5680000 MH0301221 PE1770300 MH0300821 PR7770100 PE2770500 PC1770100 PE2770400 MH0300821 PB0770500 MT1400722 NA1040022 NB0040022 PE1770400 PC2770100 PB2770100 MD4401421 MD4300821 PR7770200 PA1770800 MD4300621 PT8127064 PA1773200 PE1770800 MD4300821 RH1770800 MD4201221 Frame Assembly Description Qty Engine frame Pan head screw Pan head screw Side frame Pan head screw Pan head screw Stay Pan head screw Guide plate Collar (M3x6x9.5F) Spring (Guide) Pan head screw Guide shaft P-tight screw Guide block P-tight screw Pitch sensor sub Collar Spring (Guide) Collar (6x9x1) P-tight screw Post Hex nut Plain washer Spring washer Latch handle Spring (Latch handle) Collar (4x6x8.7) Pan head screw Pan head screw Platen, CL408 only Clamp (B) Pan head screw Timing belt, CL408 only Tear-off cutter Cutter protector Pan head screw Head open SW Pan head screw 1 3 2 1 2 2 2 4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 2 2 1 2 11 CL408/412 Item # Part Number 40 41 42 43 PE6770900 NA1030022 PR7771000 PT8130064 Frame Assembly Description Qty Paper guide Plain Washer Platen Roller, CL412 only Timing belt, CL412 only 1 1 1 1 12 CL408/412 Frame Assembly 13 CL408/412 Thermal Head Assembly Item # Part Number Description 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 PA1772000 MD4401021 PA1772500 PA1771900 MD4300621 PA1772300 MD4300621 PA1771800 MD4300621 PA1770600 PB2770300 MA0401021 PB0770700 ND0020030 PB2770100 MD4401421 PA1771500 PL2720100 MD4300821 NA1040022 MD4300821 PC0770100 PB0770600 PE1740100 PE1740200 PC1770200 PA0740100 ND0060030 PE2770300 PB3770100 PB0770300 MD4300621 PR7770600 NG2201230 PR7770700 GH000531A MD4300621 RH1770100 RH1770200 MD4300621 GH000521A Head frame Pan head screw Head bracket Plate (Ribbon adjust) Pan head screw Adjust plate (A) Pan head screw Head sub bracket Pan head screw Adjust plate (B) Collar (4x6x7.2F) Pan head screw Shaft (Head adjust) E-snap ring Collar (4x6x8.7) Pan head screw Adjust plate Adjust collar Pan head screw Plain washer Pan head screw Spring Shaft (Head pressure) Head pressure bracket Head tension pin Spring (head) Pressure plate E-snap ring Collar (6x8x4F) Roller (6x12x143) Shaft (Support) Pan head screw Latch handle Pin Head pressure set Thermal head, CL408 only Pan head screw HDP cable HDS cable Pan Head Screw Thermal head, CL412 only 14 Qty 1 2 1 1 2 1 1 1 2 1 1 1 1 2 1 1 1 1 1 1 1 1 1 2 2 2 2 4 4 2 1 2 1 1 1 1 1 1 1 1 1 CL408/412 Thermal Head Assembly 15 CL408/412 Thermal Head Assembly 16 CL408/412 Item # Part Number 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 PE4730100 PE2720100 PA4690900 MH0300521 PT2301020 PA0680400 PC1730100 PE2730100 PB5730100 MA0303022 MA1300822 MT1300522 MD4300621 PB0740602 PE4720200 MA0301821 MA0302522 MT1300522 MH1250621 PA0680300 PC0740200 PA0730100 PA0730200 PE1681100 PE7720100 PE6720100 MD4300621 PA1770500 MD4300621 MA0300621 RH1740400 PR4740100 MD4300621 PA1772600 MD4300621 PA1771700 MD4300621 MD4401021 PT1112080 PR1720400 Ribbon Assembly Description Ribbon boss Collar (10x12x10) Spring P-tight screw Oilless dry metal Disc Spring Stopper collar Adjust screw Pan head screw Flat head screw Hex nut Pan head screw Ribbon (Shaft) Plate holder boss Pan head screw Pan head screw Hex nut P-tight screw Lining Spring Guide plate Hold plate Guide plate (B) Disc plate (A) Disc plate cover Pan head screw Sensor bracket Pan head screw Pan head screw Ribbon sensor (SEN4) Spring Pan head screw Ribbon frame Pan head screw Adjust plate Pan head screw Pan head screw Ball supporter Pulley (50) 17 Qty 2 4 8 8 2 2 2 2 2 5 1 1 1 2 2 1 1 1 4 2 1 2 2 1 1 1 3 1 1 2 1 1 2 1 4 2 4 2 4 1 CL408/412 Item # Part Number 41 42 43 44 45 46 47 48 49 50 ND0060030 PE2770600 PT8170064 PR1730900 PR1770100 PC0740200 MH0300821 PA2771300 MD4300621 PT8155064 Ribbon Assembly Description E-snap ring Collar (8x10x19) Timing belt, CL408 only Ribbon boss Pulley Spring P-tight screw Spring bracket Pan head screw Timing belt, CL412 only 18 Qty 1 1 1 2 1 1 1 1 2 1 CL408/412 Ribbon Assembly 19 CL408/412 Ribbon Assembly 20 CL408/412 Main PCB Assembly Item # Part Number 01 04 RJ1770201 MD4300621 Description Main PCB sub assy(W/O ROM) Pan head screw 21 Qty 1 5 CL408/412 Serial Port Option Item # Part Number 01 RJ1772200 Description RS232C I/F assy 22 Qty 1 CL408/412 Parallel Port Option Item # Part Number 01 02 RJ1772001 MD4300621 Description Centronics I/F assy Pan head screw 23 Qty 1 2 CL408/412 Memory Card Assembly Item # Part Number 01 RJ1773001 Description Card PCB assy 24 Qty 1 CL408/412 Item # Part Number 01 02 03 04 05 06 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 PA1774100 PA1770700 MD4300621 PR0770100 PT1112060 PE1770900 PE8770300 ND0040030 MH0300821 PR1520200 PB0770200 ND0040030 PB0770900 ND0020030 PE1570300 MH0250621 RH1772100 PA1774200 MH0300821 MD4300821 PT9689000 MH1300621 MH4300821 NA1003022 PB0770800 PE4770100 PE4770200 MD4301221 ND0060030 PE1520700 PA1774000 MD4300621 PA1773900 MD4300621 PE8770400 PA0770100 PJ4770100 PE7770100 PC1770400 PE2770800 Dispenser Assembly Description Dispense frame Roller bracket Pan head screw Dispense roller Ball supporter Dispense bracket Gear (1x33) E-snap ring P-tight screw Pressure roller Shaft (Pressure) E-snap ring Shaft (Dispense) E-snap ring Dispense sensor bracket P-tight screw Dispense cable Latch bracket P-tight screw Pan head screw Magnet P-tight screw S-tight screw Plain washer Shaft (Rewind) Rewind core Rewind boss Pan head screw E-snap ring Handle Rewind frame Pan head screw Rewind plate Pan head screw Pulley (50) Frange Facing (9x26x2) Frange (8x26) Spring (Rewind) Collar (Spring) 25 Qty 1 1 2 1 2 1 1 1 2 1 1 2 1 2 2 2 1 1 1 2 1 1 2 2 1 1 1 1 1 1 1 3 1 4 1 1 2 1 1 1 CL408/412 Item # Part Number 42 43 44 46 47 48 49 50 51 52 53 PT1112080 MD4401021 PT8155064 PR7773100 PR7773000 PB0771200 PA1774700 PA2770100 PE3520600 ND0020030 PT9681600 Dispenser Assembly Description Ball supporter Pan head screw Timing belt Dispense sub unit Rewind sub unit Shaft Dispenser Plate Bracket, Stopper Dispenser Roller E-Ring, E2 Spacer 26 Qty 2 1 1 1 1 1 1 1 4 2 2 CL408/412 Dispenser Assembly 27 CL408/412 Dispenser Assembly 28 CL408/412 Dispenser Assembly 29 CL408/412 Cutter Assembly Item # Part Number 01 02 03 05 06 07 08 09 10 PR7772000 MD4300621 PA1770400 MH0300821 PB0771000 MD4300621 RJ1773600 MD4300621 RH1772000 Description Cutter set Pan head screw Cutter bracket P-tight screw Post (M3x6x19) Pan head screw Cutter PCB set Pan head screw Cutter cable 30 Qty 1 2 1 2 1 1 1 2 1