Transcript
CL600
2V 600Ah(10hr)
The rechargeable batteries are lead-lead dioxide systems. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized. Should the battery be accidentally overcharged producing hydrogen and oxygen, special one-way valves allow the gases to escape thus avoiding excessive pressure build-up. Otherwise, the battery is completely sealed and is, therefore, maintenance-free, leak proof and usable in any position. Battery Construction Component
Positive plate
Negative plate
Container
Cover
Safety valve
Terminal
Separator
Electrolyte
Raw material
Lead dioxide
Lead
ABS
ABS
Rubber
Copper
Fiberglass
Sulfuric acid
General Features ●
●
● ● ●
●
● ●
Performance Characteristics
Absorbent Glass Mat (AGM) technology for efficient gas recombination of up to 99% and freedom from electrolyte maintenance or water adding. Not restricted for air transport-complies with IATA/ICAO Special Provision A67. UL-recognized component. Can be mounted in any orientation. Computer designed lead, calcium tin alloy grid for high power density. Long service life, float or cyclic applications. Maintenance-free operation. Low self discharge.
Dimensions and Weight Length(mm / inch) Width(mm / inch) Height(mm / inch) Total Height(mm / inch) Approx. Weight(Kg / lbs)
302 / 11.89 175 / 6.89 331 / 13.03 343 / 13.50 42 / 92.6
Nominal Voltage 2V Number of cell 1 Design Life 20 years Nominal Capacity 77oF(25oC) 10 hour rate (60A, 1.8V) 600Ah 5 hour rate (108A, 1.75V) 540Ah 1 hour rate (364A, 1.6V) 364Ah Internal Resistance 0.3mOhms Fully Charged battery 77oF(25oC) Self-Discharge 3% of capacity declined per month at 20oC(average) Operating Temperature Range Discharge -20~60oC Charge -10~60oC Storage -20~60oC o o 3000A(5s) Max. Discharge Current 77 F(25 C) Charge Methods: Constant Voltage Charge 77oF(25oC) Cycle use 2.35-2.45V Maximum charging current 120A Temperature compensation -5.0mV/oC Standby use 2.25-2.3V Temperature compensation -3.3mV/oC
Discharge Constant Current (Amperes at 77oF25oC) End Point Volts/Cell 1.60V 1.65V 1.70V 1.75V 1.80V
10min 15min 30min 45min
1h
3h
5h
10h
1161 1101 1038 974 909
364 351 337 322 307
186 181 174 167 160
115 113 111 108 105
65 64 63 61 60
887 844 800 755 710
618 590 562 533 503
480 461 440 419 397
Discharge Constant Power (Watts at 77oF25oC) End Point Volts/Cell 1.60V 1.65V 1.70V 1.75V 1.80V
10min 15min 30min 45min
1h
2h
3h
5h
1911 1800 1688 1577 1467
710 680 649 617 583
483 472 460 446 418
358 349 340 330 309
225 222 218 214 211
1424 1123 1347 1067 1269 1009 1191 951 1112 892
905 864 820 776 731
(Note)The above characteristics data are average values obtained within three charge/discharge cycles not the mimimum values.
page1 of 2
www.vision-batt.com
Current
Charged Volume
O
Discharge characteristic (25 C)
Voltage
CL600
(%) (xCA)
Voltage(V)
2.0
2V600Ah
Charge characteristic curve Constant voltage charge characteristic o (0.2CA,25 C)
(V)
140
167A 108A
60A
120
0.25
100
0.20
80
1.6
600A
1200A
364A
1
2
3
5
20 30
10 min
CHARGE VOLTAGE 2.25
0.15
60 0.10
40 0
CHARGED VOLUME
2.50
60
2
3
5
10
20
20
0.05
0
0
h
2.00
CHARGING CURRENT 1.75
0
Discharge time
2
4
6
8
10
12
14
16
18
20
Charging time (hours)
Relationship between charging voltage and temperature
Self-discharge characteristic 110 100
2.6 Capacity(%)
Voltage (V)
90 2.5
CYC
2.4
LE U
S TA N
2.3
SE
D BY
80 70 60
USE
2.2
-10
0
10 20 30 o Ambient temperature( C)
40
40
50
0
2
6
8 10 12 14 Storage time: months
80 60 Testing conditions: floating voltage: 2.25 to 2.30V/Cell o o ambient temperature: 25 C(77 F)
18
20
80 60
40
40
20
20
0
5
10 Life(year)
100% D.O.D.
0
15
400
50% D.O.D.
800
1200
30% Depth of discharge
1600
2000
2400
Number of cycles(cycles)
Temperature effects on float life
Temperature effects on capacity 120
25
100
2.30V/Cell
0.1C
Capacity (%)
20 Life(years)
16
100 Capacity(%)
Capacity(%)
4
120
100
10
5
0.2C 0 .3 C
80 60
1 .0 C
40
2 .0 C
20 0
20 oC
Cycle service life in relation to depth of discharge
Life characteristics of standby use 120
0
30 oC
40 oC
50
10
20
30
40
0
50
-20
-10
Temperature( oC)
THE INTERNATIONAL CERTIFICATION NETWORK
ISO9001:2000
MH25860
0
10 20 Temperature( oC)
30
40
G4M19906-9202-E-16
www.vision-batt.com
Shenzhen Center Power Tech. Co., Ltd. Center Power Industrial Park, Tongfu Industrial District Dapeng Town, 518120 Shenzhen, China Tel: (+86-755) 8431 8088 Fax: (+86-755) 8431 8038 E-mail:
[email protected] Copy Right Shenzhen Center Power Technology Co., Ltd (Edition 2003-9)
Page 2 of 2
50
