Transcript
classic mounting The wide range of mounting accessories are an important part of the dedolight system. In feature films and documentaries, gaffers often need to mount dedolight heads in concealed positions so that the camera’s view is neither obscured nor restricted by lighting stands or obtrusive mounting devices. Compact size is a significant benefit of the dedolight system. The dedolight uses an industry standard 16 mm (5/8 " ) mounting socket and can be rotated 360°, allowing the head to be suspended upside down.
DST
DST dedolight stand Collapsed: 48 cm (19 " ) Maximum extension: 213 cm (7 ' ) Weight: 955 g (2.1 lbs) DV6B
DSTFX
DSTX
DSTFX dedolight flexible stand extension Compatible with DV6B vacuum mount, CLAMP1 dedolight clamp, or any 16 mm (5/8 " ) stud. It can be bent in any direction, even S-shaped or curled. A wonderful tool in difficult locations. Length: 51 cm (20 " ), Weight: 150 g (5.3 oz.) DSTX Extension dedolight stand extension. Length: 49,5 cm (1.6 ' ), Weight: 88 g (3.1 oz.)
DH2
CLAMP1
DH2 dedolight wall holder Made of special elastic aircraft aluminium, the dedolight holder not only tapes to flat surfaces but cut-outs in the plate allow it to be attached to table legs and small or large pipes. Just use the supplied mounting chains or gaffer tape, nails or screws. The base plate’s attached two way articulating arm is made of heavy duty spring steel. Weight: 142 g (5 oz.)
CLAMP1 dedolight clamp The dedolight clamp attaches securely to stands, pipes, shelves, etc. up to 4.8 cm (1 - 7/8 " ) diameter. It is fitted with a 16 mm (5/8 " ) stud that pivots and locks in two positions. Weight: 147 g (5.2 oz.)
DWS
DLUMT
DLCLAMP
DV6B Vacuum mount 152 mm (6 " ) diameter vacuum cup creates a powerful suction, enabling you to mount the dedolight head securely to windows, doors or other flat, nonporous surfaces. Comes complete with a locking swivel joint. The swivel joint has a 16 mm (5/8 " ) stud for easy mounting of light fixtures up to 15 kg (33 lbs). Weight: 666 g (1.47 lbs) DWS Screw mount 16 mm (5/8 " ) stud with wood screw and plate. Stud length: 20 cm (7.8 " ). Weight: 140 g (4.9 oz.)
DLUMT Universal mount Allows the attachment of standard dedolight heads (DLH4) to cameras by 1/4 " screw or shoe mount. Weight: 62 g (2.2 oz.)
DLCLAMP Camera clamp Allows the attachment of a DLOBA2 light head to a camera carrying handle. May also be used with DLUMT to attach standard dedolight heads. Weight: 122 g (4.3 oz.)
DLSA Stand adapter Allows attachment of onboard light head (DLOBA2) to light stands with 16 mm (5/8 " ) stud. Weight: 57 g (2 oz.) DLSA
53
