Clean Air Purge

Transcript

EMBER DETECTORS CLEAN AIR PURGE PRODUCT CODE Cobra200, Cobra210 NE-ODTI-246 EMBER DETECTOR CLEAN AIR PURGE POWER SUPPLY AND INTERFACE UNIT FOR MODEL 246 EMBER DETECTORS PANEL COMPONENTS Description Product Code Power Supply PCB-PSU2AEN Interface Board PCB-TEC082-246 DESCRIPTION This weatherproof panel can be used outdoors in conjunction with ember detectors supplied by Technoswitch. The panel will facilitate a number of requirements for the optimum operation of the ember detector when installed in outdoor and/or dirty environments. Compressor NE-ODTI-COM220 for Cobra200 NE-ODTI-COM110 for Cobra210 Main Filter ENC-COBRA-MF Compressor Filter ENC-COBRA-CF These requirements include ƒƒ power for the detector, ƒƒ interface for the alarm/fault signals to a conventional fire control panel, ƒƒ a constant clean air supply to purge the ember detector. The enclosure filters air through the main filter fitted to the door panel, then the air passes through a secondary filter on the compressor. This process ensures a constant clean air supply to purge the ember detector. www.technoswitch.co.za E & OE Document No: DS Cobra200 Range 170613 EMBER DETECTORS CLEAN AIR PURGE PRODUCT CODE Cobra200, Cobra210 SPECIFICATIONS C OBRA 200 / C OBRA 210 Input Voltage 100 – 250 V AC Output Voltage 24 V DC to interface unit Battery Input 1x 24 V DC Compressor Output Quick connect coupling Ember Detector Output Female pin connector Punch Outs 5x 20 mm for wiring into and out of panel (glands provided) Weight (incl. batteries) 31 kg (approx.) Filter Replaceable filter cartridge Housing Powder coated heavy sheet metal Cobra200 220 V AC COMPRESSOR / 110 V AC COMPRESSOR PURGE BOX FOR EMBER ONLY COMPRESSOR Operating Input Voltage 220 V AC or 110 V AC Power 70 Watts Frequency 50 Hz Pressure 0.035 MPa Output 83 L/min Optimum Hose Length 10 m Dimensions (L x H x W) 186 x 138 x 98 mm ORDERING INFORMATION Product Code Product Description COBRA200 COBRA210 Air Purge Box, c/w Model 246 Ember Detector Interface, PSU & 230 V AC Compressor Air Purge Box, c/w Model 246 Ember Detector Interface, PSU & 110 V AC Compressor ƒƒDisclaimer Although the contents of our product literature have been prepared with the greatest care, Technoswitch can accept no liability whatsoever for any direct or indirect damages of any kind that may arise due to either errors or omissions in them, or amendments to products or other specifications following publication. www.technoswitch.co.za HEAD OFFICE - JOHANNESBURG Cussonia Park, Ridge Road, Laser Park, Johannesburg PO Box 1752, Randpark Ridge, South Africa, 2156 T +27 (0)11 794 9144 E [email protected] CAPE TOWN T +27 (0)21 948 4575 E [email protected] DURBAN T +27 (0)31 266 8843 F +27 (0)86 750 6912 E [email protected] E & OE Document No: DS Cobra200 Range 170613