Transcript
TM
Cleaner Solution = Cleaner Pads System 3000 and 3000D™ Features: • Works with Random Orbital, DA, Rotary polishers • System 3000D™ is the first self-contained pad cleaning system that filters and recycles cleaning solution to continuously reduce polish contaminants • Works with all sizes and types of pads wool and foam from 3” to 9” • Positive displacement pump lets user control flow of cleaning solution • Works with other cleaning accessories bonnets, applicators, wash mitts, etc. • Environmentally friendly - System 3000D™ uses only 1.6 gallons of water (50% less than other pad washers) • Uses the power of the polisher to agitate and clean pads U. S. Patent # 8,893,734 and other International Patents
Additional Important Features: • Closed top design keeps operator clean when spin-drying pads • Fluted wash plate cleans effectively without damaging pads • Molded with 100% polypropylene & glass-filled nylon • German engineered positive displacement pump • System 3000D™ weighs less than 20 pounds (with 1.6 gallons)
TM
The System 3000D™ with Aqua-Clean Technology is a self-contained cleaning system featuring a user controlled pump, a removable catch basin and a replaceable filter. The first cleaning system that filters and recycles the cleaning solution. Easy and effective to use for most types of pads and polishers. This Environmentally friendly, water-saving unit is perfect for applications where cleaner pads with less contamination are essential.
Easy to Operate Simply fill the pail to the desired level with clean water, add one packet of Snappy-Clean Boost™ powder, open the covers and insert the soiled pad attached to the polisher. Then run the polisher while pressing repeatedly on the wash plate. The pressing action will activate the pump and draw the cleaning solution from the bottom of the pail into the pad. Use the power of the polisher to agitate and clean the pad and to control the amount of solution brought into the pad. The dirty solution and contaminants will drain into the catch basin where it can be filtered and reused or discarded when the basin is full. Spin-dry the pad inside the unit to complete the cleaning cycle.
Choose from three operating modes for different cleaning levels: 1. Filtered – the cleaning solution is continuously recycled through a replaceable 10 micron filter at the bottom of the catch basin. The filtered cleaning solution drains to the bottom of the pail for repeated cleanings. 2. Captured – the catch basin retains the dirty solution with out the use of a filter. Simply fill the pail to the bottom of the catch basin (1.6 gallons), close the drains on the basin, then discard the dirty solution when the basin is full. 3. Standard – remove catch basin and use full pail until cleaning solution needs to be replaced. The System 3000™ model utilizes the standard mode only.
TM
Lake Country’s System 3000™ Padwasher & Cleaning
Station is a self-contained cleaning system featuring a user controlled cleaning solution pump. It is our standard model which features a durable plastic wash plate and incorporates a non-filtered design. The System 3000™ padwasher continually circulates the cleaning solution. Works best where frequent solution changes are a must.
Easy to Operate Simply fill the pail to the desired level with clean water, add one packet of Snappy-Clean Boost™ powder, open the covers and insert the soiled pad attached to the polisher… then run the polisher while pressing repeatedly on the wash plate. The pressing action will activate the pump and draw the cleaning solution from the bottom of the pail into the pad. Use the power of the polisher to agitate and clean the pad and to control the amount of solution brought into the pad. The dirty solution and contaminants are returned to the pail. Spin-dry pad inside the unit to complete the cleaning cycle.
Single Operating Mode (System 3000™): Standard –Use full pail until cleaning solution needs to be replaced. The System 3000 model utilizes the standard mode only.
LEGEND:
System 3000™ Padwasher & Cleaning Station
System 3000D™ Padwasher & Cleaning Station
TM
A - Top Guard (2) B - Screw (2) C - Cover Lock (2) D - Cover Ring (1) E - Wash Plate (Stainless Steel 3000D, Plastic 3000) (1) F - Springs (5) G - Pump Assembly (1) H - Holding Tray (1) I - Bolts (5) J - 5 Gallon Pail (1) K - Catch Basin (1) L - Drain Plugs (4) M - Filter (1)
950 Blue Ribbon Circle North • Oconomowoc, WI 53029 • (262) 367-8395 • Fax (262) 567-7025 • Email:
[email protected] • U.S.: 800-648-2833 International Sales Office: P.O. Box 89 • Glenview, IL 60025 U.S.A. • (847) 635-7400 • Fax: (847) 635-0916
www.lakecountrymfg.com Copyright© LCM 2013
w w w. l a k e c o u n t r y m f g . c o m
