Preview only show first 10 pages with watermark. For full document please download

Cleaning Instructions Fi-6130 And Fi-6140

   EMBED

Share

Transcript

Cleaning Instructions for fi-6130 and fi-6140 Scanner BEFORE CLEANING Open the ADF while pulling the cover open It is recommended that these items be cleaned EVERY 1,000 SCANS Consumables Part Number CON-3450-011A Consumable Kit SC-CLE-WGD Cleaning Kit ADF Cover Open Lever Brake Rollers Pick Roller Feed Rollers Eject Rollers Glass Plastic Rollers Turn the Scanner OFF while cleaning the following locations Using F1 Impregnated Cleaning Wipes Brake Rollers Clean lightly taking care not to scratch the surface. ADF Glass Surfaces x 2 Clean lightly. Pick Roller x 2 Clean lightly taking care not to scratch the surface. Plastic Rollers x 4 Clean lightly while rotating with your finger. Take care not to roughen the surface. P.T.O. Cleaning Instructions for fi-6130 and fi-6140 Scanner PFU Imaging Solutions Europe Ltd Brake Rollers Pick Roller Feed Rollers Eject Rollers Glass Plastic Rollers Turn the Scanner ON while cleaning the following locations Using F1 Impregnated Cleaning Wipes Eject Rollers x 2 Feed Rollers x 2 Clean lightly taking care not to roughen the surface. Open the ADF only if the Function Number Display is showing “1”through “9”. Simultaneously hold down the “Send to” and “Scan” buttons on the operator panel. The rollers will start to rotate slowly Hold a soft dry, moistened cleaning paper against the surface of the rotating rollers, lightly cleaning the surface. As a guideline, 7 presses of the “Send to” and “Scan” buttons make the rollers rotate one full turn. “Send to” Button “Scan” Button For further information please refer to the fi-6130 and fi-6140 Scanner Operators Guide which can be found on our Website: http://www.fujitsu.com/emea/products/ January 2010