Transcript
ITEM NAME: Belham Living Carter Mid Century Modern Coffee Table SKU: REDU037-1
For assistance with assembly, please contact customer service 1-888-880-4884 1/6
PRE-ASSEMBLY PREPARATION: DO NOT LET CHILDREN PLAY IN OR AROUND THE UNIT DUE TO THE POSSIBLE
!
RISK OF FINGER ENTRAPMENT • Please read through these instructions before beginning assembly. • Two adults are recommended for assembly. • Clear out the space for assembly and lay out all parts based on Parts List, extra room will allow you to easily determine if all the pieces are present. • Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or hardware. • Keep small parts and pieces away from children until fully assembled. • Please check for any loose screws and tighten them before you use.
60
0m
mm
8 19
m
60
m
Right Runner Board (4)
65
Drawer Bottom (7)
2
Drawer Left (10)
0m
m
0m
m
60
Qty:1
0m
m
Qty:1 Right Side (6) 10
Qty:1
0m
m
m 6m
2
Qty:2 Drawer Right (9) 10
0m
m
mm
0m
m
Qty:2 Drawer Front (11)
10
0m
m
Qty:2
305mm
80
2
m
m 80
45
Qty:2 Drawer Back (8) 10
80
60
7m
m
60
Qty:1 Left Runner Board (3)
Qty:1 Left Side (5) 27
mm
mm
m
Qty:1 Top Frame (2)
0m
4
0m
80mm
128mm
Bottom Frame (1)
60
m
0m
0 12
80mm
1
128mm
PANEL AND FITTINGS IDENTIFICATION:
Qty:2 Leg (12)
Qty:4
2/6
HARDWARE LIST: 1/4x44mm
1/4x17mm
1/4x13mm
Bolt (A)
Qty:8
Spring Washer (B)
Qty:8
Flat Washer (C)
Qty:8
Cam Lock (F)
Qty:16
M4
Ø8x30mm
Allen Key (D)
Qty:1
Wooden Dowel (E)
Qty:16
Cam Pin (G)
Qty:32
Cam Lock (H)
Qty:16
STEP-BY-STEP ASSEMBLY:
1
x2
STEP 1: ● Insert the Cam Pins (G) to Drawer Sides (09 and 10) and attach the Drawer Sides to Drawer Back (08), then using the Cam Locks (H) lock them together, see details as below. ● Insert the Drawer Bottom (07) into the grooves of Drawer Sides and Drawer Back. H
G 09
08
H G
10
07
DETAIL STEP PLEASE SEE THE BELOW PICTURE. (1)
(2)
(3)
(4)
G H
3/6
STEP-BY-STEP ASSEMBLY:
2 x2
STEP 2: ● Insert the Cam Pins (G) to Drawer Front (11) and attach the Drawer Front to Drawer Sides, then using the Cam Locks (H) lock them together, see details as below. Note: Tighten Cam Locks with an across headed screwdriver (not supplied), see details as below.
H G
11 H G
DETAIL STEP PLEASE SEE THE BELOW PICTURE. (1)
(2)
(3)
(4)
G
H
3
STEP 3: Fix the Legs (12) to Bottom Frame (01) using Bolts (A) with Spring Washers (B) and Flat Washers (C), then tighten with Allen Key (D). 12
12
12
01
12
12 D
A
B C 01
4/6
STEP-BY-STEP ASSEMBLY: STEP 4: Turn over the Bottom Frame with legs. Insert Cam Pins (G) and Wooden Dowels (E) into the Bottom Frame, then attach Left Side (05), Right Side (06), Left Runner Board (03) and Right Runner Board (04) to the Bottom Frame locking with Cam Locks (F). Note: Tighten Cam Locks with an across headed screwdriver (not supplied), see details as below.
4
F
06
G E
F
F
04
E F
E
G
E
03
G
F
G
F
F
G
E E 05
G
G
F
E
DETAIL STEP PLEASE SEE THE BELOW PICTURE.
E
(1)
G
(2)
(3)
(4)
G
F
5
STEP 5: Insert Cam Pins (G) to the Top Frame (02) and Insert the Wooden Dowels (E) to the pre-assembled boards, see details as below. Attach the Top Frame to the pre-assembled unit using Cam Locks (F). Note: Tighten Cam Locks with an across headed screwdriver (not supplied), see details as below. 02
E E
G
G F
G
F DETAIL STEP PLEASE SEE THE BELOW PICTURE. (1)
(2)
(3)
(4)
E
E E
G F
F
G F
G
F
5/6
STEP-BY-STEP ASSEMBLY:
6
STEP 6: Insert the drawers into the assembled unit, see details as below.
MAINTENANCE AND CARE TIPS FOR WOOD FURNITURE:
-Always dust, wipe and clean in the direction of the wood grains. -Check and re-tighten screws/blots after the product has been used for a period of time. -Heat creates chemical changes in the furniture finish. As a result, whitish spots may appear.
-It is best to keep your furniture in a climate controlled environment. Extreme temperature and humidity changes can
6/6
