Transcript
PRODUCT SPECIFICATIONS
VWDV70NTSC Aura Direct Vent Gas Fireplace
45
Rough Opening Depth
Dimensions
" (1151 mm) 10 " (276 mm)
23 " (594 mm)
Glass Viewing Area: 6 91⁄2" W x 141⁄2" H, 1008 sq. in. (1765 mm x 368 mm, 6504 cm2) Actual Dimensions: 7 2 3⁄4"W x 173⁄4"H x 231⁄8"D (1848 mm x 451 mm x 587 mm) Framing Dimensions: 911⁄8"W x 48½"H x 233⁄8"D (2315 mm x 1232 mm x 594 mm)
23 " (587 mm) 91 " (2315 mm) Rough Opening Width
Standard features • Crisp, sleek lines suit today’s contemporary demand • ClearView non-reflective ceramic glass appears nearly invisible • Total Signature Command® System with touch screen remote (TSFSC) • Comes standard with Onyx and Diamond fireglass, and stone kit • Black porcelain panels (required, order separately) • Hidden side controls • Included conversion kit easily converts from natural gas to liquid propane • Floor illumination using standard halogen light bulbs • Needs only single 5" x 8" top vent termination • Includes required non-combustible board • Power Vent compatible (but not required for typical installations)
Rough Opening Height 48 " (1232 mm)
40 " (1029 mm)
17 " (451 mm)
69 " (1765 mm)
14 " (368 mm)
72 " (1848 mm)
"(
90 94
22
90
"( )
m
m
• Three optional surrounds in Black Texture, Iron Age, or Stainless Steel •O ptional Black Texture inside trim kit for non-combustible wall finishes • Optional driftwood log set • F ireglass kit colors available in Sapphire, Bronze, Onyx, and Diamond
22
94
m
m
)
FIELD INSTALLED ACCESSORIES
127 " (3245 mm)
Page 1 of 2
PRODUCT SPECIFICATIONS
VWDV70NTSC Aura Direct Vent Gas Fireplace Technical information BTU Input: 51,000 Max., 34,000 Min. (Nat) / 43,000 Max, 32,000 Min. (LP) Ignition System: Total Signature Command® System Gas Type: Natural Gas or Liquid Propane Gas Line: 18" (473 mm) Flex line w/shut off 1/2" (12.7 mm) FPT Compatible Pipe: 5 " x 8" (127 mm x 203 mm) Selkirk, Simpson Dura-Vent, Metalfab, ICC Flue Type: Dedicated top vent Switch Wiring: 15' (4.5 m) command center wire extension and cover plate (SCSWEK) Design Certified: CSA Clearance around Flue
Clearance to combustibles
From Opening
Stud
12" (305 mm)
Thermal Efficiency: Up to 80% AFUE Efficiency: 71.4% (Nat) / 77.5% (LP) P4 Canada Efficiency: 79.3% (Nat) / 79.8% (LP) Mantel clearances Note: T he combustible area above the facing must not protrude more than 3/4" from the facing. If it does, it is considered a mantel and must meet the mantel requirements listed in the owner’s manual. 10" (254 mm)
Header
Noncombustible Material (Supplied) Standoff
12" (305 mm)
efficiency data
Top of Fireplace Opening
Side View
Framing
73 " (1867 mm) Outline of Face
FP2930
50 " (1284 mm) 3 " (98 mm)
7 " (197 mm) 6 " (159 mm)
12" Min.
Wall
Fireplace: 0" Clearance to stand offs all sides Top of unit to Ceiling: 30" (762 mm) Firebox Opening to Wall: 91⁄2" (241 mm) Hearth Requirement: 0" Clearance
23 " (608 mm)
30" (762 mm) Min. to Ceiling
9 " (241 mm)
Horizontal: 3" (76 mm) all sides Vertical: 3" (76 mm) all sides Outside Wall: 1" (25 mm) all sides
6 " (159 mm)
12" (305 mm) Max. Depth
1" Side of Fireplace Opening
3 "
2 " 3"
Top View
1 "
5"
4 "
45°
6"
A Brand of Vermont Castings Group 149 Cleveland Drive, Paris, Kentucky 40361 www.monessenhearth.com To avoid personal injury or property damage, the product described by this brochure must be installed, operated and maintained in strict compliance with the instructions packaged with the product and all applicable building or fire codes. Contact local building or fire officials about restrictions and installation inspection requirements. All photographs and drawings on this brochure are for illustrative purposes only and are not intended for, nor should they be used as a substitute for the instructions packaged with the unit. Appearance and specifications of the product are subject to change without notice. © 2014 Vermont Castings Group 0614 v1
