Transcript
Clock Audio http://www.clockaudio.com/
MODEL : SM 80NS-RF-Latch
DESCRIPTION Through Table Microphone Shock Mount with Phantom Power Adaptor and Latching Switch. Through Table Microphone Mount. All-metal construction. A hinged flap allows the unit to sit almost flush to a table. Simple push / click fit allows a microphone to be removed quickly and easily so that the table can be used for other matters Suitable for use on Clockaudio C3100 microphone. Supplied with Phantom Power Adaptor. Input - 3 pin TA 3MB Male Tini Q Connector and Output – 3 Pin Male XLR. A latching switch is provided. Finish: Satin Nickel. For 'Glossary of Terms' Click Here Technical Dimensions
Height Above Surface: 3mm (0.18") Diameter: 58mm (2.28") Body Diameter: 51mm (2") Body Below Surface - XLR version: 61mm (2.4").
Application
Low profile Through Table Shock Mount fitted with Tini Q and 3 Pin XLR Female Connector and Phantom Power Adaptor and Latching Switch.
Termination
Input - 3 pin TA 3MB Male Tini Q Connector and Output – 3 Pin Male XLR.
Finish
Satin Nickel.
Architects and engineer specifications
The Through Table Microphone Mount is of an all metal construction. A hinged flap allows the unit to sit almost flush to a table once the Microphone has been disconnected, allowing the table to be used for other matters. It is supplied with a dedicated Phantom Power Adaptor designed to power the C 3100 miniature Gooseneck Microphones terminated with Tini Q (mini XLR) 3 pin connectors. The Phantom Power Adaptor accepts 9 to 48 volts DC and has an impedance of 200
1/2
Clock Audio http://www.clockaudio.com/ Technical Ohms. The Phantom Power Adaptor includes filters, which will eliminate all GSM frequencies from 900-1200 MHz and is terminated with a male 3 Pin XLR. A latching switch is provided. Finish: Satin Nickel. Overall diameter of 58mm/ 2.28”.
ADDITIONAL IMAGES
2/2 Powered by TCPDF (www.tcpdf.org)
