Transcript
Clock Audio http://www.clockaudio.com/
MODEL : SM 20-RF
DESCRIPTION Through table microphone shock mount Low profile design. Robust all metal construction with a Tini Q male 3 Pin connector. Shock mount unit includes two rubber isolators to minimise the transfer of mechanical noise from the table. Module is fitted with a Phantom Power Adaptor accepting 9 to 48 volts DC and has an Impedance of 200 Ohms. Phantom power adaptor includes filters which will eliminate all GSM frequencies from 800-1200 MHz. Shock mount is terminated with a male 3 Pin XLR. Finish: Satin Black Technical Application
Microphone Shock Absorbing Base for permanent fixing
Type
Through Table Mount
Termination
Tini Q male 3 Pin connector
Finish
Satin Black
Architects and engineer specifications
The through table microphone shock mount is of a very low profile design. It is made of a robust all metal construction with a Tini Q male 3 Pin connector. The shock mount unit includes two rubber isolators to minimise the transfer of mechanical noise from the table or place of installation. The module is fitted with a Phantom Power Adaptor accepting 9 to 48 volts DC and has an Impedance of 200 Ohms. The Phantom power adaptor includes filters which will eliminate all GSM frequencies from 800-1200 MHz. The shock mount is terminated with a male 3 Pin XLR. Finish: Satin Black
1/1 Powered by TCPDF (www.tcpdf.org)
