Transcript
Clock Audio http://www.clockaudio.com/
MODEL : S 120X-2
DESCRIPTION Table top Microphone mounting Base standalone microphone base Made from EN1A toughened steel Prewired with 2 metre cable terminating in a female XLR connector. Mute circuit board is inbuilt into the base. Pre wired Latching push switch The base has a cavity that can be accessed from the bottom via a metal plate secured by three screws suitable for mounting additional electronics. Finish: Matt Black Technical Dimensions
DIA120mm (4.7 ins) H57mm (2.2"")
Application
standalone table top microphone stand with mute circuit and latching switch
Termination
Female XLR
Finish
Matt black
Architects and engineer specifications
Table microphone standalone base is of EN1A toughened steel. It is prewired with 2 metre cable terminating in a female XLR connector. A mute circuit board is inbuilt into the base. A pre wired Latching push switch is fixed to the top of the base. The base cavity (74mm x 22.5mm) has removable plate to allow access for installation of small electronic devises / connection of the microphone to external equipment. Finish: Matt Black Diameter: 120mm (4.7 ins) Height: 57mm (2.2"")
1/1 Powered by TCPDF (www.tcpdf.org)
