Transcript
Clock Audio http://www.clockaudio.com/
MODEL : SM 80N-X5
DESCRIPTION Table Mounted Microphone Shock Mount Shock absorbing microphone mount. Hinged flap allows the unit to sit almost flush to a table Simple push / click fit allows a microphone to be removed quickly and easily so that the table can be used for other matters 5 Pin female XLR Connector . Finish: Nickel For 'Glossary of Terms' Click Here Technical Dimensions
Height Above Surface: 3mm (0.18") Diameter: 58mm (2.28") Body Diameter: 51mm (2") Body Below Surface - XLR version: 61mm (2.4")
Application
A low profile table mounted Shock Mount fitted with 5 Pin XLR Female Connector.
Termination
5 pin female XLR
Finish
Nickel
Architects and engineer specifications
The shock absorbing microphone mount is of an all-metal construction with an overall diameter of 58mm/ 2.28”. A hinged flap allows the unit to sit almost flush to a table once the microphone has been disconnected allowing the table to be used for other matters. It comes complete with a 5 Pin female XLR Connector allowing all Clockaudio “E” version microphones to be used. Finish: Nickel
1/1 Powered by TCPDF (www.tcpdf.org)
