Transcript
Clock Audio http://www.clockaudio.com/
MODEL : C 800ES-RF
DESCRIPTION Hyper cardioid mini shotgun microphone with on/off reed switch and LED indicator Immune to RF artefacts 800-1200MHz Slim mini shotgun microphone Optimised for clarity Superior grade component Reed switch for pop free muting LED Status indicator Unobtrusive slimline design Engineered in high quality brass Finished in satin black Included is a phantom power adaptor Technical Dimensions
Shaft dia 8mm (0.32") Head dia 12mm (0.5")
Length
458mm(18")
Application
Developed for speech purposes in a wide range of pro and live sound applications including places of worship, conference and leisure centres, banks and financial trading centres.
Type
Condenser (back electret)
Polar Pattern
Hypercardioid
Frequency Response
50 Hz - 18 KHz
Sensitivity
47dB +/- 3dB at 1 KHz (0dB = 1 V/Pa)
Impedance
200 Ohms
S/N Ratio
64dB (A)
Maximum Sound Pressure Level
125dB 1% THD
Power Requirements
9 - 48 volts phantom power
1/2
Clock Audio http://www.clockaudio.com/ Technical Termination
PPA adaptor - Male 3 pin XLR
Wiring connections
Pin 1 - Ground Pin 2 - Phase + Pin 3 - Phase -
Supplied Accessories
W8 Foam windshield included
Finish
Satin Black
Architects and engineer specifications
The back electret condenser microphone has a hypercardioid polar pattern design optimised for speech. The microphone is made of solid brass and is terminated with a male 3 Pin XLR plug. The microphone has a semi rigid gooseneck shaft. The shotgun microphone is fitted with a magnetic slide reed switch to allow pop/click free muting of the microphone. Also included is an integral Phantom Power Adaptor that will accept 9 to 48 volts DC. The Phantom power adaptor also includes filters which will eliminate all GSM frequencies from 800-1200 MHz. Frequency response 50 Hz to 18 KHz; Sensitivity -47.0dB +/- 3dB @ 1KHz (0dB =1V/Pa), Impedance 200 Ohms, Total Harmonic Distortion (THD) at an operating level of 125db is no greater than 1%, s/n ratio 64dB(A). A W8 foam wind shield is included Finish: Non-reflective satin black. Dimensions: L 458 (18 ins) Shaft diameter: 8mm Head diameter: 12mm
ADDITIONAL IMAGES
2/2 Powered by TCPDF (www.tcpdf.org)
