Transcript
Clock Audio http://www.clockaudio.com/
MODEL : SM 80SNX5-Latch
DESCRIPTION Through Table Microphone Shock Mount with 5 Pin Female XLR connector, Latching switch and Bi-Colour LED indicator. All metal construction. A hinged flap allows the unit to sit almost flush to a table Simple push / click fit allows a Microphone to be removed quickly and easily so that the table can be used for other matters. Comes complete with a 5 Pin Female XLR Connector. A mechanical latching switch and Bi-Colour LED indicator is fitted. Finish: Satin Nickel. For 'Glossary of Terms' Click Here Technical Dimensions
Height Above Surface: 3mm (0.18") Diameter: 58mm (2.28") Body Diameter: 51mm (2") Body Below Surface - XLR version: 61mm (2.4")
Application
Low profile Through Table Mount fitted with 5 Pin XLR Female Connector, Latching Switch and Bi-Color LED indicator.
Termination
5 Pin Female XLR
Finish
Stain Nickel
Architects and engineer specifications
The Microphone Mount is of an all-metal construction with an overall diameter of 58mm/ 2.28”. A hinged flap allows the unit to sit almost flush to a table once the Microphone has been disconnected allowing the table to be used for other matters. It comes complete with a 5 Pin Female XLR Connector allowing all 5 Pin Clockaudio “E” version Microphones to be used. A mechanical Latching Switch and Bi-colour LED indicator is fitted to the base accepting 5, 12 or 24Vdc @ 30mA. Finish: Satin Nickel. LED Voltage: Jumpers allow 5 – 12 or 24 Volt connection.
1/2
Clock Audio http://www.clockaudio.com/
ADDITIONAL IMAGES
2/2 Powered by TCPDF (www.tcpdf.org)
