Transcript
Clock Audio http://www.clockaudio.com/
MODEL : C 420E
DESCRIPTION Twin Mount back electret microphone Twin mount back electret condenser microphone Constructed from high quality brass Each microphone has individually adjustable angled solid shafts Phantom power required 9 – 48 Volts Inline phantom power adaptor contains a switchable 10 dB pad and bass cut filter Two independent microphones offers fail safe operation Technical Length
309mm
Application
Designed for us in places of worship, conferencing, broadcasting and other places requiring twin microphone for backup / fail safe operation.
Type
Back electret condenser
Frequency Response
50 Hz to 18 KHz
Sensitivity
-44.0dB +/- 3dB @ 1Khz (0db =1V/Pa)
Impedance
200 Ohms
S/N Ratio
120db
Power Requirements
9 – 48 Volts
Finish
Satin black
Architects and engineer specifications
Twin mount back electret condenser microphone with a cardioid polar pattern. Constructed from high quality brass each microphone is fixed to solid shafts which can be individually adjusted 180 degrees for correct vertical angle. Phantom power required 9 – 48 Volts dc. The inline phantom power adaptor contains a switchable 10 dB pad and bass cut filter(-4dB per octave at 400 Hz to –6dB per octave at 100 Hz); Impedance 200 Ohms; Frequency response 50 Hz to
1/2
Clock Audio http://www.clockaudio.com/ Technical 18 KHz; Sensitivity -44.0dB +/- 3dB @ 1Khz (0db =1V/Pa); Total Harmonic Distortion (THD) at an operating level of 120db is less than 1%. Finish: Non reflective satin black. Dimensions:L309mm
ADDITIONAL IMAGES
2/2 Powered by TCPDF (www.tcpdf.org)
