Transcript
Clock Audio http://www.clockaudio.com/
MODEL : C 850E
DESCRIPTION Hand held Shotgun microphone with Supercardioid polar pattern Smooth Response for consistent sound quality Superior Grade Components Balanced output Selectable Bass Roll Off and 10dB pad 3 pin male XLR Termination Finished in Satin Black Includes W85 windshield and SA 8 clip Technical Dimensions
21mm (0.83")
Length
238mm (9.3")
Application
Designed for use in Broadcast, Film/Video Recording and Theatre Sound Reinforcement.
Type
Condenser (back electret)
Polar Pattern
Supercardioid
Frequency Response
50Hz - 20 KHz
Sensitivity
-48dB +/- 3dB @ 1 KHz (0dB = 1 V/Pa)
Impedance
200 Ohms
S/N Ratio
68dB(A)
Maximum Sound Pressure Level
126db at 1KHz 1% T.H.D.
Power Requirements
9 - 48 volts phantom power
Termination
Male 3 Pin XLR
Supplied Accessories
Windshield and Stand Adaptor fitted with Camera Shoe 5/8" Stand Thread (RYCOTE accessories are available for this product)
1/2
Clock Audio http://www.clockaudio.com/ Technical Weight
7.6oz (216gms)
Finish
Satin black
Architects and engineer specifications
Hand held back electret condenser shotgun microphone with cardioid polar pattern. Audio response is specifically tailored for broadcast, Film/Video Recording and Theatre Sound Reinforcement. The microphone is made of rugged metal construction with shock mount suspension and terminates in a 3 pin male XLR connector. Requires phantom power supply 9 – 48 Volts. C850E includes inbuilt switchable bass filter 4dB per octave at 400 Hz to - 6dB per octave at 100 Hz and a -10dB pad. Balanced output, frequency response 50 Hz to 18 KHz; Impedance 200 Ohms balanced output; Sensitivity -48dB +/- 3dB @ 1Khz (0dB =1V/Pa); Total Harmonic Distortion (THD) at an operating level of 120dB is no greater than 1%. Max SPL 126dB 1% THD. Windshield and Stand Adaptor fitted with Camera Shoe 5/8"" Stand Thread. Finish: Satin Black Overall Length - 238mm (9.3"")
ADDITIONAL IMAGES
2/2 Powered by TCPDF (www.tcpdf.org)
