Transcript
Clock Audio http://www.clockaudio.com/
MODEL : PPM
DESCRIPTION Belt pack power supply / adaptor for connection to an electret condenser microphone Belt pack power supply / adaptor for connection to an electret condenser microphone. Mic input socket Tini Q male 3 pin, Output socket to mixer via male 3 pin XLR. Phantom power 9-48V from a mixer can be connected and used to power the condenser microphone. If a mixer does not have phantom power then a 1.5V battery (not supplied) can be inserted into the adaptor to power the condenser microphone. Included are switched positions for flat response or low frequency roll off. Finish: Low reflective Satin Black Technical Dimensions
76mm x 64mm x 28mm (3” x 2.6” x 1.1”)
Application
Belt pack power supply adaptor to allow the connection of a electret condenser microphone.
Finish
Satin Black
Architects and engineer specifications
Belt pack power supply / adaptor for connection to an electret condenser microphone. Mic input socket Tini Q male 3 pin, Output socket to mixer via male 3 pin XLR. Phantom power 9-48V from a mixer can be connected and used to power the condenser microphone. If mixer does not have phantom power then a 1.5V battery can be inserted into the adaptor to power the condenser microphone. Included are switched positions for flat response or low frequency roll off. Finish: Low reflective Satin Black Dimensions: 76mm x 64mm x 28mm (3” x 2.6” x 1.1”)
1/1 Powered by TCPDF (www.tcpdf.org)
