Transcript
Clock Audio http://www.clockaudio.com/
MODEL : SM 80S-RF-Latch
DESCRIPTION Through Table Microphone Shock Mount with Phantom Power Adaptor, Latching Switch and Bi-Color LED. Through table Microphone Mount. all-metal construction. A hinged flap allows the unit to sit almost flush to a table. Simple push / click fit allows a microphone to be removed quickly and easily so that the table can be used for other matters Suitable for use on Clockaudio C3100 microphone. Supplied with Phantom Power Adaptor. Termination Input - 3 pin TA 3MB Male Tini Q Connector and Output – 3 PinMale XLR. A latching switch and Bi-Colour LED is provided. Finish: Satin Nickel. For 'Glossary of Terms' Click Here Technical Dimensions
Height Above Surface: 3mm (0.18") Diameter: 58mm (2.28") Body Diameter: 51mm (2") Body Below Surface - XLR version: 61mm (2.4")
Application
Low profile table Shock Mount Termination Input - 3 pin TA 3MB Male Tini Q Connector and Output – 3 PinMale XLR and phantom power adaptor, latching switch and bi-colour LED is provided.
Termination
Tini Q / 3 Pin XLR
Finish
Satin Black
Architects and engineer specifications
The Through Table Microphone Mount is of an all metal construction. A hinged flap allows the unit to sit almost flush to a table once the Microphone has been disconnected, allowing the table to be used for other matters. It is supplied with a dedicated Phantom Power Adaptor designed to power the C 3100 miniature Gooseneck Microphones terminated with Tini Q (mini XLR) 3 Pin connectors. The Phantom power Adaptor
1/2
Clock Audio http://www.clockaudio.com/ Technical accepts 9 to 48 volts DC and has an impedance of 200 Ohms. The Phantom Power Adaptor includes filters, which will eliminate all GSM frequencies from 900-1200 MHz and is terminated with a male 3 pin XLR. A latching switch and a Bi-colour LED indicator is fitted to the base accepting 5, 12 or 24Vdc @ 30mA. Finish: Satin Black Overall diameter of 58mm/ 2.28”.
ADDITIONAL IMAGES
2/2 Powered by TCPDF (www.tcpdf.org)
