Transcript
Clock Audio http://www.clockaudio.com/
MODEL : SM 80N-RF
DESCRIPTION Table Mounted Microphone Shock Mount with phantom power adaptor Shock absorbing microphone mount All-metal construction A hinged flap allows the unit to sit almost flush to a table Simple push / click fit allows a microphone to be removed quickly and easily so that the table can be used for other matters Supplied with phantom power adaptor Fitted with a 3 pin female XLR and Tini Q connector. Finish: Satin Nickel Technical Dimensions
Height Above Surface: 3mm (0.18") Diameter: 58mm (2.28") Body Diameter: 51mm (2") Body Below Surface - XLR version: 61mm (2.4")
Application
Low profile table mounted Shock Mount fitted with Tini Q and 3 Pin XLR Female Connector and phantom power adaptor.
Termination
Tini Q and 3 pin female XLR
Finish
Satin Black
Architects and engineer specifications
The through table shock absorbing microphone mount is of an all metal construction. A hinged flap allows the unit to sit almost flush to a table once the microphone has been disconnected, allowing the table to be used for other matters. It is supplied with a dedicated phantom power adaptor designed to power the C 3100 miniature gooseneck microphones terminated with Tini Q 3 pin connectors. The Phantom power adaptor accepts 9 to 48 volts DC and has an impedance of 200 Ohms. The phantom power adaptor includes filters, which will eliminate all GSM frequencies from 900-1200 MHz and is terminated with a male 3 pin XLR. Finish:
1/2
Clock Audio http://www.clockaudio.com/ Technical Satin Nickel Overall diameter of 58mm/ 2.28”.
2/2 Powered by TCPDF (www.tcpdf.org)
