Transcript
Clock Audio http://www.clockaudio.com/
MODEL : CS 1-RF
DESCRIPTION Boundary layer microphone developed to minimise the number of microphones on the conference table whilst maintaining high performance and ease of installation. Immune to RF artefacts Boundary layer single element condenser microphone Half cardioid polar pattern Fully balanced High quality engineering in solid brass Finish Non-reflective Black Nextel Inbuilt Phantom Power Module For 'Glossary of Terms' Click Here Technical Dimensions
62mm (2.4") x 44mm (1.7") x 22mm (.87")
Application
Boundary Layer Microphone with a half cardioid polar pattern. Designed to be placed in the middle of the conference table, with the participants facing the condenser element. The design accommodates both side and bottom cable exits which means it can be used for either mobile and permanent applications. Inbuilt Phantom Power Module.
Type
Condenser (back electret)
Polar Pattern
Half cardioid
Frequency Response
50 Hz - 18 KHz
Sensitivity
47dB +/- 3dB at 1 KHz (0dB = 1 V/Pa)
Impedance
200 Ohms
S/N Ratio
64dB (A)
Maximum Sound Pressure Level
125dB 1% THD
1/2
Clock Audio http://www.clockaudio.com/ Technical Power Requirements
9 - 48 volts phantom power
Termination
Open ended
Weight
452g (16oz
Finish
Black Nextel
Architects and engineer specifications
The condenser microphone is of a single element boundary layer type, with a half-cardioid polar pattern. The microphone is be made from solid brass, and capable of being permanently mounted with the use of an M 10 x 1 hollow bolt, nut and washer. The microphone includes a 6.6 ft (2 metre) cable with open-ended termination. Also include is an integral phantom power adaptor that accepts 9 to 48 volts DC. The phantom power adaptor includes filters which will eliminate all GSM frequencies from 800 MHz - 1.2 GHz. Frequency response: 50Hz to 18KHz; Sensitivity –47.0dB +/- 3 dB @ 1KHz (0dB = 1V/Pa) Impedance 200 Ohms. Total harmonic Distortion (THD) at an operating level of 125dB shall be no greater than 1 %. Finish: Black Nextel. Dimensions: 62mm x 44mm x 22mm
2/2 Powered by TCPDF (www.tcpdf.org)
