Transcript
Specifications Microphone Specifications ELEMENT: DIRECTIONAL CHARACTERISTICS:
Back Electret Condenser Noise Cancelling Cardioid
SENSITIVITY:
-47 dB ± 3dB (0dB = 1V/Pa)
FREQUENCY:
100Hz-10kHz
IMPEDANCE:
1500Ω
OPERATING VOLTAGE:
1-5V
Product Warranty
Point Source Audio (PSA) products purchased in the U.S.A. are warranted for one year from date of purchase to be free of defects in materials and workmanship. In event of such defect, product will be repaired without charge or replaced (at our option) with a new product of equal or superior value. This warranty excludes defects due to normal wear, abuse, shipping damage, or failure to use product in accordance with instructions. This warranty is void in the event of unauthorized repair or modification. Please register your product warranty and always KEEP YOUR RECEIPT.
Earphone Specifications SPEAKER TYPE:
Single driver ported
SENSITIVITY:
96dB
IMPEDANCE:
16Ω
COLOR: CABLE LENGTH (TOTAL): L/R CABLE: INPUT CONNECTOR: TRANSDUCER HOUSING:
Black and Orange, black cable 1.2 Meters
REGISTER YOUR WARRANTY Your prompt product registration establishes your right to the protection available under the terms and conditions of your Point Source Audio warranty. It also helps us contact you in the rare event that we discover an issue with your product. And, it helps us to bring you new products specifically designed to meet your needs.
®
CM-i5 Intercom Headset With Condenser Microphone Owner’s Manual
www.point-sourceaudio.com/warranty.html
50 cm 3.5 mm Plastic molded shell
(Design and specifications are subject to change without notice).
www.point-sourceaudio.com
© 2017 Point Source Audio. All rights reserved. The Point Source Audio logo is a registered trademark of Point Source Audio. All other trademarks included herein are the property of their respective owners. Patent Number: 9,271,065
Read the enclosed instructions and cautions thoroughly before using this product. Failure to observe the proper use of this product could result in voiding your warranty.
www.point-sourceaudio.com
www.point-sourceaudio.com
Switching Intercom Systems
Fitting Your Headset
Your headset can be conveniently adapted to work with different intercom systems or even your smart phone. See our adapter cables in the Parts List for cross compatibility options.
To size the headband for a tighter fit, attach the CM-HSi to the head frame on both sides.
Parts List Included Accessories EM-5
EM-5 Earphones terminated with 3.5mm mini connector
CM-CSE
Premium headset storage case, orange
CM-WSN5
Windscreen for CM-i5
CM-BCP
Belt clip accessory for XLR connector
CM-HSi
Headband sizer
ADP-4Mx5Mm
Adapter cable: 4-pin male XLR to 5-pin male mono XLR
ADP-5Fx4F
Adapter cable: 5-pin female XLR to 4-pin female XLR
ADP-4MxPH
Adapter cable: 4-pin male XLR to male 3.5mm TRRS
ADP-5FxPH
Adapter cable: 5-pin female XLR to male 3.5mm TRRS
ADP-PHx4F
Adapter cable: female 3.5mm TRRS to 4-pin female XLR
ADP-PHx5Mm
Adapter cable: female 3.5mm TRRS to 5-pin male mono XLR
ADP-PHx5Ms
Adapter Cable: female 3.5mm TRRS to 5-Pin Male Stereo
CM-PCH
Intercom headset travel pouch, black
CM-EXT-4/5
Expandable cable with 4 or 5-pin male and female XLR. 2 ft. retracted / 10 ft. extended
CM-CAB-KIT
Cable wrap with earphone installation tool
6-ETP-S 6-ETP-M 6-ETP-L
3 sets eartips for EM-3/5 earphones. Specify size: small, medium, or large
STEP 1
Optional Accessories
STEP 2
Storing Your Headset Follow these instructions for proper storage: Place headset and ensure microphone is safely tucked into the base.
Next, gently coil the cable on top of the headset.
Securing Your Microphone When adjusting your boom microphone, always secure the mic to the headset by aligning the arrow with the circle to “lock” the mic into position. Do NOT force the boom past this point as it may cause damage to your microphone over time.
Line up the symbols to lock the boom into place.
www.point-sourceaudio.com
www.point-sourceaudio.com
www.point-sourceaudio.com
