Preview only show first 10 pages with watermark. For full document please download

Cma-1, Cma-2 Angle Clamps, Ub U-bolt

   EMBED

Share

Transcript

CMA-1, CMA-2 Angle Clamps, UB U-Bolt Description: The CMA-1 and CMA-2 are messenger angle clamps used with Hendrix Spacer Cable Systems. The clamps are cast ductile iron which are hot dip galvanized after fabrication. Benefits: • A material and labor cost savings alternative to messenger dead-end construction on angles CMA-1 • Designed to work with Hendrix angle brackets for efficient installation Application: The CMA-1 clamp is designed for angles that pull away from the pole. The clamp will attach directly to the Hendrix BA4-15 angle bracket. When other Hendrix angle brackets are specified, the CMA-1 should be installed using a thru eyebolt. The CMA-2 clamp is designed for angles that pull towards the pole. The clamp should be attached to the BA4-15 angle bracket using a “U” bolt Hendrix Catalog No. UB. CMA-2 CMA-1 UB CMA-2 Catalog No. CMA-1 CMA-2 UB A .23 -.75 .16 -.75 1 1/2 Dimension (inches) B ø 5/8 ø 5/8 /16 -12 unc 9 C — — Max. Line Angle (degrees) Min. Ultimate Load (lbs) Weight (lbs) 60° — 11,000 — 1.1 60° 4 1/4 11,000 2.4 2.1 Material HDG Ductile Iron HDG Ductile Iron Galvanized Steel Marmon Utility LLC. • 53 Old Wilton Road • Milford, NH 03055-3119 Telephone: (603) 673-2040 • Fax: (603) 673-1497 • Email: [email protected] • Website: http://www.hendrix-wc.com A Marmon Wire & Cable / Berkshire Hathaway Company 4/07 2-24