Transcript
CMC-U011B 10/100Base TX to 100BaseFX
Bi-Direction
Fiber Media Converter
Highlights Compact size and cost-effective One 10/100 Base TX Ethernet TP Port and One 100 Base FX (Bi-Direction SC Connector)
Dual-Wavelength Ethernet Fiber Port
100Base FX Fiber Port can support either Multi or Single Mode
Factory pre-set features or optional DIP switch model to configure Purely designed and Manufactured in Taiwan
Specification Standards
IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX/100BaseFX
Features
Number of Ports: 1 10/100BaseT with RJ-45 Connector 1 100BaseFX with Fiber Connector (Multi/Single Mode, Bi-Direction SC Connector)
Data Transfer Rate
Ethernet: 10Mbps/Half-Duplex 20Mbps/Full-Duplex Fast Ethernet: 100Mbps/Half-Duplex 200Mbps/Full-Duplex
Transmission Media
10BaseT Cat. 3, 4, 5 UTP/STP, up to 100 m 100BaseTX Cat. 5 UTP/STP, up to 100 m 100BaseFX: 50/125μm or 62.5/125μm Multi Mode SC-Type Fiber optic cable, up to 2 km 9/125μm or 10/125μm Single Mode Fiber optic cable
Led Indicators
Per Port: (TX): Link/Act, Speed, FDX/COL (FX): Link/Act, FDX/COL Per Unit: Power
Power Requirement
DC 5V/2A
Power Consumption
10 Watts (Max)
Dimensions
102 × 74 × 22 mm (L x W x H)
Weight
230 g
Operating Temperature
0 to 45℃
Storage Temperature
-20 to 90℃
Humidity
10 to 90% RH (non-condensing)
Certifications
FCC Class A, CE
CMC-U011B Key Features
Compliant with IEEE 802.3 10BaseT and IEEE 802.3u 100BaseTX/100BaseFX Standards
One 10/100BaseTX Ethernet TP Port and One 100BaseFX Dual-Wavelength Ethernet Fiber Port
Two different type of transmitting/receiving wavelength
One 100BaseFX Fiber Port can support either Multi or Single Mode
TP Port can support Half/Full-Duplex, Auto-MDI/MDI-X and Auto-Negotiation
Providing a slide switch for Full- and Half-Duplex selection on FX Port
Multiple Fiber Connectors
Providing 19” Converter Chassis for up to 16 slots with redundant power supply for optional expansion use
Features preset to customers’ application need or an optional DIP switch under project factory manufacturing
Optional DIP Switch ( Standard without DIP Switch ) Note: PIN-1 TP port mode: AUTO (default) or FORCE PIN-2 TP port speed: 100 or 10 when TP at Force PIN-3 TP port duplex: FDX or HDX when TP at Force PIN-4 LFP: LFP enabled (default) or disabled PIN-5 Fiber port duplex: 100FDX (default) or 100HDX Note: 1. PIN-2 and PIN-3 will take effect only when PIN-1 is set at TP-FORCE. 2. PIN-5 must be set to 100FDX for single-mode
Technical Specifications
Model Name
Wavelength
Media
Distance
TX Power (dBm)
RX Sensitivity (dBm)
Power Budget (dBm)
CMC-U011BA-SC/MM
TX: 1310nm RX: 1550nm
MMF
2km
-20~-14
Max. -31
11
CMC-U011BB-SC/MM
TX: 1550nm RX: 1310nm
MMF
2km
-20~-14
Max. -31
11
CMC-U011BA-SC/SM15
TX: 1310nm RX: 1550nm
SMF
15 km
-15 ~ -8
Max. -34
19
CMC-U011BB-SC/SM15
TX: 1550nm RX: 1310nm
SMF
15 km
-15 ~ -8
Max. -34
19
CMC-U011BA-SC/SM30
TX: 1310nm RX: 1550nm
SMF
30 km
-15 ~ -8
Max. -34
19
CMC-U011BB-SC/SM30
TX: 1550nm RX: 1310nm
SMF
30 km
-15 ~ -8
Max. -34
19
Ordering information CMC-U011BA-SC/ MM
10/100BaseTX to 100BaseFX Bi-Direction Media Converter, Multimode fiber SC ,2m, (TX:1310nm, RX:1550nm)
CMC-U011BB-SC/ MM
10/100BaseTX to 100BaseFX Bi-Direction Media Converter, Multimode fiber SC ,2Km, (TX:1550nm, RX:1310nm)
CMC-U011BA-SC/S M15
10/100BaseTX to 100BaseFX Bi-Direction Media Converter, Single-mode fiber SC ,15Km, (TX:1310nm, RX:1550nm)
CMC-U011BB-SC/S M15
10/100BaseTX to 100BaseFX Bi-Direction Media Converter, Single-mode fiber SC ,15Km, (TX:1550nm, RX:1310nm)
CMC-U011BA-SC/S M30
10/100BaseTX to 100BaseFX Bi-Direction Media Converter, Single-mode fiber SC ,30Km, (TX:1310nm, RX:1550nm)
CMC-U011BB-SC.S M30
10/100BaseTX to 100BaseFX Bi-Direction Media Converter, Single-mode fiber SC ,30Km, (TX:1550nm, RX:1310nm)
BCR-16
16 slots of Media Converter Chassis ( one power supply included )
BCR-16PS
BCR-16 Spare Power Supply ( used for redundant power supply )
