Transcript
CMX-12 HD/SD Digital AV Mixer
Operation Manual
CMX-12
Disclaimers The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document. Cypress also makes no commitment to update or to keep current the information contained in this document. Cypress Technology reserves the right to make improvements to this document and/or product at any time and without notice.
Copyright Notice No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or any of its part translated into any language or computer file, in any form or by any means - electronic, mechanical, magnetic, optical, chemical, manual, or otherwise - without express written permission and consent from Cypress Technology. © Copyright 2010 by Cypress Technology. All Rights Reserved. Version 1.0 December 2010
Trademark Acknowledgments All products or service names mentioned in this document may be trademarks of the companies with which they are associated.
Safety Precautions Please read all instructions before attempting to unpack or install or operate this equipment, and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment:
Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons. To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water. Never spill liquid of any kind on or into this product. Never push an object of any kind into this product through module openings or empty slots, as you may damage parts. Do not attach the power supply cabling to building surfaces. Do not allow anything to rest on the power cabling or allow it to be abused by persons walking on it. To protect the equipment from overheating, do not block the slots and openings in the module housing that provide ventilation.
Revision History Version No
VS1
Date
20101201
Summary of Change
Add HDCP Description
Table of Contents 1.
Introduction ……………………..……………………...…........….…….
1
2.
Features …………………………………………......……........…...……
2
3.
Major Operating Controls and Their Functions …………………..….
3
■
POSITION/TIME ............................................................................
3
■
FUNCTIONS ..................................................................................
3
■
MODE CONTROL ........................................................................
4
■
DIGITAL EFFECTS ..........................................................................
5
■
ADJUST .........................................................................................
6
■
VIDEO SOURCE SELECT ...............................................................
7
■
VIDEO/AUDIO MIXER ..................................................................
8
■
AUDIO LEVEL ...............................................................................
9
■
REAR PANEL .................................................................................
10
Basic Operations ………..............................……...……..............……
11
A
Input signal selection and Back color Selection .....................
11
B
VIDEO MIX ...................................................................................
12
C
VIDEO WIPE ................................................................................
13
D
Picture-In-Picture .......................................................................
16
E
KEY ...............................................................................................
17
F
AUTO FADE/WIPE Selection ........................................................
18
G
DIGITAL EFFECT ..........................................................................
18
H
AUDIO MIXER ..............................................................................
18
I
OSD ADJUST ..................................................................................
19
5.
Connector and Installation ..................…………..........…..…....…...
20
6.
Specifications ....................................................................................
21
7.
Acronyms ……………...……........……............................................…
22
4.
1. Introduction This high definition HD/SD digital AV Mixer. Each input BUS supports 6 inputs (2 x HDMI, 2 x Component, 2 x S-Video and Composite video) and also Background Color for special efficiancy. The output supports 1 x HDMI, 2 x Component, 2 x S-Video and Composite video, it also supports position adjustment and recording. The output supports HD/SD resolution for example, NTSC, NTSC-4.43, PAL, PAL-M, PAN-N, SECAM, 480p, 576p, 720p 50/60, 1080i 50/60. The output resolution can auto adjust to consistency resolution, please refer to the diagram on the right side.
1
Input
Output
HDMI
HDMI
Component
Component
S-Video
S-Video
Composite
Composite
Digital video--480i,576i,480p,576p,720p50,720p60,1080i50,1080i60 Analog video--480i,576i,480p,576p,720p50,720p60,1080i50,1080i60 Analog video--NTSC,NTSC4.43,PAL,PAL-M,PAL-N,SECAM
2. Features Selective size and position for digital effects area and PIP windows. Automatic fade and wipe with speed preset control. Digital effects- Still,Mosaic,Paint,Negative. 96 wipe patterns. Chroma key & Luminance key. High Picture Quality. 3x8 back color. Joystick control for digital effect position. Fade control for Video and Audio. Video and Audio mixing. Two HDMI source inputs. Two Component source inputs. Two Composite and S-Video source inputs. One HDMI recording outputs. Two Component recording outputs. One Composite and S-Video recording outputs. One Composite and S-Video preview outputs(OSD). Auxiliary audio input. Microphone input and headphone output. Picture in Picture control.(3 window sizes) Each A/B BUS can adjust the Contrast / Brightness / Color / HUE / Detail & Aspect Ration. Supports Lip-Sync delay up to 170ms. Composite supports 3D comb filter and YC separation. Motion and Edge Adaptive De-interlacing. Note: When receiving content that has HDCP encryption there will be no video output except for HDMI output port.
2
3. Major Operating Controls and Their Functions POSITION/TIME n
CMX-12 VIDEO EFFECTS MIXER +3
+4
MODE CONTROL
-10
+4
-15 AUDIO LEVEL
FUNCTIONS
TIME
-15
CMX-12 VIDEO EFFECTS MIXER
ONE-WAY
REVERSE
①
MULTI
FUNCTIONS
TIME
MODE CONTROL
REVERSE
MULTI
WIPE
PIP
1/2
1/3
1/4
MIX
KEY
-3
-1
0
+1
+2
-10
-5
-3
-1
0
+1
+2
WIPE
DIGITAL EFFECTS
ONE-WAY
-5
L
DB
R
STILL
PAINT
DIGITAL EF
DB
+3
PIP
ADJUST ADJUST
NEGATIVE
MOSAIC
A MIN
MAX
DEMO ON
POSITION A SOURCE
B SOURCE
1/2
MIN
MAX
1/2
1/3
1/4
EDGE
1/3
B
COLOR
1/4
L-KEY 1/2
SCAN
MIX
KEY
B-KEY 1/2
VIDEO SOURCE SELECT
VIDEO/AUDIO MIXER VIDEO
POSITION
INPUT A
MAX
A SOURCE 1/2
②
AUDIO FOLLOW
B SOURCE
INPUT B
MAX
AUX
MAX
ON
MIC
MAX
MAX
A
HDMI 1
HDMI 2
1/3
HD INPUT 1
HD INPUT 2
ON SD INPUT 1
1/4
EDGE
BACK COLOR
SD INPUT 2
COLOR
AUTO / WIPE
B
MIN
MIN
MIN
MIN
MIN
START
L-KEY 1/2
B-KEY 1/2
① Time ControlVIDEO SOURCE SELECT VIDEO/AUDIO MIXER For adjusting the transition time of Auto Fade function and Auto take function. VIDEO ② Joystick control -15 -10 MAX This joystick control has two functions controls the position of the Square wipe L AUDIO LEVEL pattern and P-IN-P picture. R -15
FUNCTIONS VIDEO EFFECTS MIXER n CMX-12
ONE-WAY
HDMI 2
REVERSE
HDMODE INPUT 2CONTROL SD INPUT 1
HD INPUT 1
MULTI
WIPE
④
FUNCTIONS
B
⑤
BACK DIGITAL COLOR
SD INPUT 2
AUDIO LEVEL
PIP
CMX-12 VIDEO EFFECTS MIXER
TIME
③
-3
-5
-3
A
A
FUNCTIONSHDMI 1
TIME
-10
-5
MODE CONTROL
ONE-WAY
REVERSE
MULTI
WIPE
PIP
1/2
1/3
1/4
MIX
KEY
-15
-10
-5
-15
-10
-5
L
R
EFFECTS -3
-1
0
+1
+2
+3
+4
-3
-1
0
+1
+2
+3
+4
DB DB
DIGITAL EFFECTS
ADJUST
STILL
PAINT
NEGATIVE
MOSAIC
ADJUST
A MIN
MAX
DEMO ON
POSITION
N
MAX
POSITION
1/2
⑥
1/3
⑦
A SOURCE
1/4
B SOURCE
MIX 1/2
1/3
L-KEY 1/2
B-KEY 1/2
KEY
1/4
EDGE
VIDEO SOURCE SELECT
⑧
B
COLOR
VIDEO
MAX
A SOURCE 1/2
AUDIO FOLLOW
INPUT A
MAX
INPUT B
MAX
STILL AUX
MAX
A MIN PAINT
MIC
NEGATIVE
MAX
B SOURCE 1/3
1/4
A
EDGE HDMI 1
HDMI 2
HD INPUT 1
HD INPUT 2
COLOR SD INPUT 1
SD INPUT 2
1)
1!
B
ON
BACK COLOR
AUTO / WIPE
B
⑨
ON
VIDEO/AUDIO MIXER
SCAN
MIN
MIN
MIN
MIN
MIN
START
L-KEY 1/2
B-KEY 1/2
③ One-way wipe button. ④ Reverse wipe button. ⑤ Multiple wipe button. ⑥ Straight wipe button. ⑦ Split wipe button. ⑧ Corner wipe button. A ⑨ Diagonal wipe button. Triangle wipe HD button. HDMI 1 ⑩ HDMI 2 HD INPUT 1 INPUT 2 SD INPUT 1 ⑪ Square wipe button.
VIDEO SOURCE SELECT
B
VIDEO/AUDIO MIXER VIDEO
MAX
INPUT A
AUDIO FOLLOW
ON SD INPUT 2
BACK COLOR
3
AUTO / WIPE
MAX
SE
LEVEL
R
DB -15
-10
-5
-3
-1
0
+1
+2
+3
+4
MODE CONTROL n MODE CONTROL MULTI
WIPE
DIGITAL EFFECTS
PIP
1@
CMX-12 VIDEO EFFECTS MIXER
FUNCTIONS
TIME
AUDIO LEVEL
MODE CONTROL
ONE-WAY
REVERSE
MULTI
WIPE
PIP
1/2
1/3
1/4
MIX
KEY
-15
-10
-5
-3
-1
0
+1
+2
+3
+4
-15
-10
-5
-3
-1
0
+1
+2
+3
+4
L
ADJUST
DB
R
DB
ADJUST
DIGITAL EFFECTS
ADJUST
STILL
PAINT
ADJUST
NEGATIVE
MOSAIC
1# A MIN
MAX
1/4
MIX
1$
A SOURCE
KEY
B SOURCE
1/2
1/3
L-KEY 1/2
B-KEY 1/2
1/4
ON
EDGE
ON
B
COLOR
PAINT
STILL
VIDEO SOURCE SELECT
1%
DEMO
A
POSITION
VIDEO/AUDIO MIXER VIDEO
MAX
SCAN
NEGATIVE INPUT A
AUDIO FOLLOW
MAX
INPUT B
MAX
DEMO
MOSAIC AUX
MAX
MIC
MAX
OURCE 1/4
EDGE
B
A
COLOR HDMI 1
HDMI 2
HD INPUT 1
HD INPUT 2
SD INPUT 1
SD INPUT 2
AUTO / WIPE
B
1^
SCAN
ON
BACK COLOR
1&
MIN
MIN
MIN
MIN
MIN
START
1/2
UT 2
VIDEO/AUDIO MIXER ⑫ Wipe button VIDEO INPUT A INPUT B AUX MIC For selecting the wipe effect. MAX ⑬ PIP button AUDIO FOLLOW MAX MAX MAX MAX Picture in picture mode can be selected by pressing this button. ⑭ Mix(Fade) button Press this button to select the fade In/Out mode. ON ⑮ KEY button BACK ThisSDbutton allows you to tune in a best performance point for the blue key SD INPUT 1 INPUT 2 COLOR and luma key effects. AUTO / WIPE ⑯ EDGE button Press WIPE button, can select sharp edge / soft edge or color edge. MIN ⑰ COLOR button MIN MIN MIN MIN START color of frame. Press color edge, can select eight different
4
LEVEL
R
DB -15
-10
-5
-3
-1
0
+1
+2
+3
+4
DIGITAL EFFECTS n DIGITAL EFFECTS
ADJUST
•(
2)
2!
-15
-10
-5
-3
-1
0
+1
+2
+3
+4
-15
-10
-5
-3
-1
0
+1
+2
+3
+4
L
DB
R
DB
ADJUST
CMX-12 VIDEO EFFECTS MIXER
FUNCTIONS
TIME
•*
AUDIO LEVEL
MODE CONTROL
ONE-WAY
REVERSE
MULTI
WIPE
PIP
1/2
1/3
1/4
MIX
KEY
DIGITAL EFFECTS
ADJUST
STILL
PAINT
NEGATIVE
MOSAIC
ADJUST
2@ A MIN
A
MAX
A SOURCE
DEMO ON
STILL
PAINT
DEMO ON
POSITION
NEGATIVE
MOSAIC
B SOURCE
1/2
1/3
L-KEY 1/2
B-KEY 1/2
1/4
EDGE
VIDEO SOURCE SELECT
B
COLOR
VIDEO/AUDIO MIXER VIDEO
MAX
B
SCAN HDMI 1
HDMI 2
HD INPUT 1
2$
2%
2^
2&
INPUT A
AUDIO FOLLOW
SD INPUT 2
⑱ A-bus digital effect ON button. INPUT A INPUT B AUX MIC ⑲ A-bus Still button and osd left adjust. MAX ⑳ A-bus Paint button and osd right adjust. AUDIO FOLLOW MAX MAX MAX MAX 2• A-bus Negative button and osd up adjust. 2@ A-bus Mosaic button and osd down adjust. 2# B-bus digital effect ON button. ON button. 2$ B-bus Still 2% B-bus Paint button. 2^ B-bus Negative button. / WIPE Mosaic button. 2& B-busAUTO MIN
MIN
MIN
MIN
START
5
MIN
MIC
MAX
MAX
MIN
MIN
MIN
MIN
BACK COLOR
AUTO / WIPE
START
VIDEO
AUX
MAX
ON SD INPUT 1
MIN
UDIO MIXER
INPUT B
MAX
A
HD INPUT 2
B
2#
SCAN
PUT 2
LEVEL
R
DB -15
-10
-5
-3
-1
0
+1
+2
+3
+4
ADJUST n MODE CONTROL WIPE
DIGITAL EFFECTS
PIP
CMX-12 VIDEO EFFECTS MIXER
FUNCTIONS
TIME
AUDIO LEVEL
ONE-WAY
REVERSE
MULTI
WIPE
PIP
1/2
1/3
1/4
MIX
KEY
1/4
EDGE
COLOR
-10
-5
-3
-1
0
+1
+2
+3
+4
-10
-5
-3
-1
0
+1
+2
+3
+4
DB
DIGITAL EFFECTS
ADJUST
DB
MODE CONTROL
-15
-15
L R
ADJUST
ADJUST
ADJUST
2* A MIN
MAX
DEMO ON
POSITION
MIX
A SOURCE
KEY
B SOURCE
1/2
1/3
L-KEY 1/2
B-KEY 1/2
ON
VIDEO SOURCE SELECT
VIDEO/AUDIO MIXER STILL VIDEO
NEGATIVE
MOSAIC
PAINT
DEMO
SCAN
INPUT A
AUDIO FOLLOW
NEGATIVE
MAX
INPUT B
MAX
AUX
MAX
MOSAIC
MIC
2(
MAX
B
A
COLOR
PAINT
B
MAX
EDGE
A
STILL
SCAN
ON HDMI 1
HDMI 2
HD INPUT 1
HD INPUT 2
SD INPUT 1
SD INPUT 2
BACK COLOR
AUTO / WIPE
B
MIN
MIN
MIN
MIN
MIN
3)
START
button MIXER 2• Adjust VIDEO/AUDIO VIDEO INPUT A INPUT B AUX MIC When LED switched off, the SDP review output side will show AB-bus / output source and output format. When LED illuminate, the suer can press 19 20 21 MAX AUDIO FOLLOW MAX MAX MAX MAX and 22 buttons to adjust the values. 2( DEMO button When LED illuminate, the auto DEMO will switch to ON and the system will auto ON sequence Demo 96 wipe patterns, press 1 TIME button to adjust the auto BACKsequence. COLOR 3) SCAN button AUTO / WIPE Press SCAN button for 3 seconds, the system will enter into SCAN function and will SCAN the input ports from 1 to 6 and record each port's format to the MIN system. MIN MIN MIN MIN START
6
A SOURCE
B SOURCE
1/2
1/3
1/4
EDGE
B
COLOR
SCAN
VIDEO SOURCE SELECT n L-KEY 1/2
B-KEY 1/2
VIDEO SOURCE SELECT
VIDEO/AUDIO MIXER
AUDIO LEVEL
VIDEO CMX-12
FUNCTIONS
TIME
ONE-WAY
MAX
MODE CONTROL REVERSE
MULTI
WIPE
-10
-5
-3
-1
0
+1
+2
+3
+4
-15
-10
-5
-3
-1
0
+1
+2
+3
+4
DB DB
INPUT A
VIDEO EFFECTS MIXER
-15 L R
INPUT B
DIGITAL EFFECTS
PIP
MIC
ADJUST
AUDIO FOLLOW
AUX
MAX
ADJUST
MAX
MAX
MAX
A MIN
3!
3@
3#
3$
3%
3^
3&
MAX
1/2
1/3
1/4
MIX
KEY
1/4
EDGE
COLOR
DEMO ON
POSITION A SOURCE
PAINT
STILL
NEGATIVE
MOSAIC
B SOURCE
1/2
1/3
L-KEY 1/2
B-KEY 1/2
B
SCAN
A ON
VIDEO SOURCE SELECT
HDMI 1
HDMI 2
HD INPUT 1
HD INPUT 2
SD INPUT 1
SD INPUT 2
VIDEO/AUDIO MIXER VIDEO
BACK COLOR
MAX
A
AUTO / WIPE
B HDMI 1
HDMI 2
HD INPUT 1
HD INPUT 2
SD INPUT 1
SD INPUT 2
3(
4)
4!
4@
4#
4$
MAX
INPUT B
MAX
AUX
MIC
MAX
MAX
MIN
MIN
ON
BACK COLOR
AUTO / WIPE
B
3*
INPUT A
AUDIO FOLLOW
MIN
MIN START
MIN
MIN
MIN MIN
MIN
START
Used to select Source1,HDMI1. Used to select Source2,HDMI2. Used to select Source3,HD input 1. Used to select Source4,HD input 2. Used to select Source5,SD input 1. When connecting both S-Video and CV at the same the time S-Video will be the first priority source to be display. 3^4# Used to select Source5,SD input 2. When connecting both S-Video and Video at the same the time S-Video will be the first priority source to be display. A-bus back color select, can select one out of eight colors. 3& B-bus back color select, can select one out of eight colors. 4$ 3!3* 3@3( 3#4) 3$4! 3%4@
7
MIN
ON
POSITION A SOURCE 1/2
STILL
PAINT
NEGATIVE
MOSAIC
B SOURCE 1/3
1/4
EDGE
B
COLOR
SCAN
VIDEO/AUDIO MIXER n L-KEY 1/2
B-KEY 1/2
VIDEO SOURCE SELECT
AUDIO LEVEL
-15
-10
-5
-3
-1
0
+1
+2
+3
+4
-15
-10
-5
-3
-1
0
+1
+2
+3
+4
L
VIDEO/AUDIO MIXER
DB
R
VIDEO
DB
INPUT A
INPUT B
AUX
MIC
CMX-12 VIDEO EFFECTS MIXER
FUNCTIONS
TIME
MODE CONTROL
ONE-WAY
REVERSE
MULTI
WIPE
PIP
1/2
1/3
1/4
MIX
KEY
DIGITAL EFFECTS
MAX
ADJUST
NEGATIVE
MOSAIC
A MIN
MAX
A SOURCE 1/2
PAINT
1/3
1/4
EDGE
B
COLOR
HDMI 2
HD INPUT 1
HD INPUT 2
SCAN
SD INPUT 1
BACK COLOR
SD INPUT 2
B-KEY 1/2
VIDEO SOURCE SELECT
MAX
B AUDIO FOLLOW
INPUT A
MAX
INPUT B
MAX
AUX
MAX
MIN
MIN
MIN
MIN
AUTO / WIPE
MAX
4^
ON HD INPUT 1
MAX
4(
MIC
A
HDMI 2
MAX
VIDEO/AUDIO MIXER VIDEO
HDMI 1
MAX
ON
B SOURCE
HDMI 1 L-KEY 1/2
A
STILL
MAX
4*
4%
DEMO ON
POSITION
AUDIO FOLLOW
ADJUST
HD INPUT 2
SD INPUT 1
SD INPUT 2
MIN
MIN
5!
5@
5#
5$
4&
AUTO / WIPE
B
5) START
BACK COLOR
MIN
MIN
MIN
MIN
START
4% A-bus LED indicator. 4^ B-bus LED indicator. When VIDEO slider move to A-bus the A-bus's LED will illuminate and move the slider to B-bus the B-bus's LED will illuminate. When slider move in between A-bus and B-bus the two LED will alternate illuminatd. When in Auto/Wipe the status will be the same condition. 4& VIDEO slide. Wipe, PIP and Key effects could be controlled by this Video slide which moves A/B bus outputs horizontally or vertically. 4* AUDIO FOLLOW. When turn on the Audio Follow A/B bus's sound indicator will follow the VIDEO slider movement. When turn off the Audio Follow, the audio indicator will become independent to adjust from 5! and 5@. 4( AUTO/WIPE. AUTO FADE/WIPE can be performed with START 5) button when the button 4( is set to ON. 5) START button. Automatic MIX and WIPE operation can be performed by pressing the START button. Transition time can be adjusted via TIME ① . When transition time lapsed, the LED goes off. 5! INPUT A:Controls the audio level of the input A. 5@ INPUT B:Controls the audio level of the input B. 5# AUX:Controls the audio level of the Auxiliary input. 5$ MIC:Controls the audio level of the Microphone input.
8
SE
URCE
AUDIO LEVEL n AUDIO LEVEL
-15
-10
-5
-3
-1
0
+1
+2
+3
+4
-15
-10
-5
-3
-1
0
+1
+2
+3
+4
L
-15
DB
R
DB
AUDIO LEVEL
CMX-12 VIDEO EFFECTS MIXER
FUNCTIONS
TIME
MODE CONTROL
ONE-WAY
REVERSE
MULTI
WIPE
PIP
1/2
1/3
1/4
MIX
KEY
DIGITAL EFFECTS
ADJUST
STILL
PAINT
NEGATIVE
MOSAIC
ADJUST
MAX
-3
POSITION
1/3
L-KEY 1/2
B-KEY 1/2
VIDEO SOURCE SELECT
1/4
EDGE
+2
+3
+4
-10
-5
-3
-1
0
+1
+2
+3
+4
5%
B
COLOR
MODE CONTROL
VIDEO
WIPE
+1
DB -15
SCAN
VIDEO/AUDIO MIXER
MULTI
0
R
B SOURCE
1/2
-1
DEMO ON
A SOURCE
-5
DB
A MIN
-10
L
PIP
MAX
INPUT A
AUDIO FOLLOW
DIGITAL EFFECTS
INPUT B
AUX
ADJUST
MIC
MAX
MAX
MAX
MAX
MIN
MIN
MIN
MIN
ADJUST
A ON HDMI 1
HDMI 2
HD INPUT 1
HD INPUT 2
SD INPUT 1
SD INPUT 2
BACK COLOR
AUTO / WIPE
B
1/4
MIX
KEY
A
MIN
DEMO
START
ON
STILL
PAINT
NEGATIVE
MOSAIC
5% Audio level indicator.(Audio level) B 1/4 This indicator EDGEshows COLOR the audio output level of REC out 1 and REC out 2.
SCAN
1/2
UT 2
VIDEO/AUDIO MIXER VIDEO
MAX
INPUT A
AUDIO FOLLOW
INPUT B
AUX
MIC
MAX
MAX
MAX
MAX
MIN
MIN
MIN
MIN
ON SD INPUT 1
SD INPUT 2
BACK COLOR
AUTO / WIPE
MIN START
9
REAR PANEL n 5*
5(
6)
HD AUDIO INPUT R1
L1
R2
6!
6@
SD AUDIO INPUT L2
R1
Y
HD INPUT 1 Pb
L1
AUX INPUT
R2
L2
SD INPUT 1 V
Pr
R
R1
L1
HD OUTPUT 1 Y Pb
R2
L2
Pr
SD PREVIEW V
S DC INPUT 12V 3.0A
HDMI OUTPUT
HDMI 2 Y
6%
6$ AUDIO OUTPUT
L
S
HDMI INPUT HDMI 1
6#
6^ 6&
Pb HD INPUT 2
6*
Pr
V SD INPUT 2
6(
S
7)
5* Source 3 HD audio input 1. 5( Source 4 HD audio input 2. 6) Source 5 SD audio input 1. 6! Source 6 SD audio input 2. 6@ Auxiliary Audio input Jack. 6# Recording out 1 Audio output Jack. 6$ Recording out 2 Audio output Jack. 6% Source 1 HDMI input 1. 6^ Source 2 HDMI input 2. 6& Source 3 HD Y-PB-PR Video input 1. 6* Source 4 HD Y-PB-PR Video input 2. 6( Source 5 SD Video and YC input 1. 7) Source 6 SD Video and YC input 2. 7! HDMI output for monitor. 7@ Recording out 1 HD Y-PB-PR Video output jack. 7# Recording out 2 HD Y-PB-PR Video output jack. 7$ SD PREVIEW out(OSD) Video and YC output jack. 7% SD Recording out Video and YC output jack. 7^ DC INPUT 12V 2.0A.
10
Y Pb HD OUTPUT 2
7! 7@
7#
Pr
7$
V SD OUTPUT
7%
S
7^
4. Basic Operations Press the power switch on the rear panel to the ON Position. The LED's on the operation panel light up and the unit is now in inital mode for operation. -15 AUDIO LEVEL
-10
-5
-3
-1
0
+1
+2
+3
+4
L
DB
R
DB -15
-10
-5
-3
-1
0
+1
+2
+3
+4
CMX-12 VIDEO EFFECTS MIXER
FUNCTIONS
TIME
MODE CONTROL
ONE-WAY
REVERSE
MULTI
WIPE
PIP
1/2
1/3
1/4
MIX
KEY
DIGITAL EFFECTS
ADJUST
NEGATIVE
MOSAIC
ADJUST
A MIN
MAX
DEMO ON
POSITION A SOURCE
STILL
PAINT
B SOURCE
1/2
1/3
L-KEY 1/2
B-KEY 1/2
1/4
EDGE
VIDEO SOURCE SELECT
B
COLOR
SCAN
VIDEO/AUDIO MIXER VIDEO
MAX
INPUT A
AUDIO FOLLOW
INPUT B
AUX
MIC
MAX
MAX
MAX
MAX
MIN
MIN
MIN
MIN
A ON HDMI 1
HDMI 2
HD INPUT 1
HD INPUT 2
SD INPUT 1
SD INPUT 2
BACK COLOR
AUTO / WIPE
B
MIN START
A. Input signal selection and Back color Selection 1. Slide the Video slide 4& to the A-bus position. A-bus LED 4% will illuminate, B-bus LED will turn off. 2. Press any of the Source 1 to Source 6 and Back color button. You will see the corresponding picture on the screen. 3. Press a Back Color button to select the back color you need. Any of the 8 Back Colors-BlueRedMagentaGreenCyanYellowWhiteBlack. can be selected by reapeatedly pressing the Back color selection button 3&. 4. The same procedures apply to the B-bus. * When the selected input source is not connected with source input or HDCP protection, the image will show with Blue screen.
11
RSE
3
L-KEY 1/2
VIDEO SOURCE SELECT
VIDEO/AUDIO MIXER VIDEO
INPUT A
INPUT B
MAX
2
AUDIO FOLLOW
L MAX AUDIO LEVEL R
MAX
1
4
CMX-12 VIDEO EFFECTS MIXER
A
-
ON HDMI 1
HDMI 2
FUNCTIONS
TIME HD INPUT 1 HD INPUT 2
SD INPUT 1 SD INPUT 2 ONE-WAY REVERSE
MODE CONTROL
BACK MULTI COLOR
WIPE
DIGITAL EFFECTS
PIP
A MIN
3
MAX
1/2
1/3
-15
A SOURCE L AUDIO 1/2 LEVEL R
B. VIDEO MIX
-10 -5 -3 B SOURCE 1/3
-15
L-KEY 1/2
-10
-1
0
+1
+2
+3
KEY ON
-5
-3
PIP
MIN STILL
DB
-1
EDGE DB 0
+1
+2
+3
B
COLOR
+4
B-KEY 1/2
ADJUST
ADJUST
VIDEO/AUDIO MIXER VIDEO
MAX
AUDIO FOLLOW
A 1/4
MIX
KEY
DEMO
2
ON
1 1/4
EDGE
COLOR
HDMI 1
PAINT
STILL
B HD INPUT 1
HDMI 2
NEGATIVE A
HD INPUT 2
MOSAIC
SD INPUT 1
SD INPUT 2
4
BACKSCAN COLOR
ON
AUTO / WIPE
B
VIDEO/AUDIO MIXER VIDEO
MAX
3
MIN INPUT A
AUDIO FOLLOW
MAX
INPUT B
MAX
AUX
MAX
MIC
START
MAX
Reset the operation panel to initial mode: 1. Press the MIX button 1$. 2. Press one of the A-bus selection button. 3. Press one of the B-bus selection button. 4. Mix effect could be controlled by Video slide 4& which sliding A to B or B to A. ON
SD INPUT 1
SD INPUT 2
BACK COLOR
AUTO / WIPE
MIN
MIN START
12
MIN
MIN
MIN PAIN
+4
1/4
VIDEO SOURCE SELECT DIGITAL EFFECTS
MODE CONTROL WIPE
MIX MIN
START
POSITION
MULTI
1/4
Y 1/2
PUT 2
AUTO / WIPE
B
OURCE
3
B-KEY 1/2
MIN
RSE
3
POSITION
-15
A SOURCE L AUDIO 1/2 LEVEL R
C. VIDEO WIPE
WIPE
-10
-1
0
+1
+2
+3
PIP
+4 DB
1/4 -5
-3
-1
EDGE DB 0
+1
+2
+3
B
COLOR
+4
B-KEY 1/2
VIDEO SOURCE SELECT DIGITAL EFFECTS
MODE CONTROL MULTI
1/3
-15
L-KEY 1/2
-10 -5 -3 B SOURCE
ADJUST
ADJUST
1
VIDEO/AUDIO MIXER VIDEO
MAX
1/4
MIX
KEY
DEMO
2
ON
PAINT
STILL
NEGATIVE A
MOSAIC
OURCE
3
1/4
EDGE
5
Y 1/2
PUT 2
AUDIO FOLLOW
A
COLOR
HDMI 1
B HD INPUT 1
HDMI 2
HD INPUT 2
SD INPUT 1
SD INPUT 2
6 VIDEO
MAX
AUTO / WIPE
3
MIN INPUT A
AUDIO FOLLOW
MAX
INPUT B
MAX
AUX
MAX
MIC
START
MAX
Reset the operation panel to initial mode: 1. Press the WIPE button 1@. 2. Press one of the A-bus selection button. 3. Press one of the B-bus selection button. 4. WIPE effect could be controlled by Video slide 4& which moves A/B bus outputs Horizontally or vertically. 5. Press 1^ EDGE butten to select frame sharp edge / soft edge / color edge. 6. When frame color is "color edge, press 1& COLOR button to select one out of eight colors to display. ON
SD INPUT 1
4
BACKSCAN COLOR
B
VIDEO/AUDIO MIXER
ON
SD INPUT 2
BACK COLOR
AUTO / WIPE
MIN
MIN
START
13
MIN
MIN
MIN
CMX-12 VIDEO EFFECTS MIXER
WIPE PATTERN Selection: n
Six wipe modes can be selected as follows: 1. Press the straight wipe button ⑥ repeatedly, Four patterns are available.
FUNCTIONS
TIME
MIN
REVERSE
MULTI
③
④
⑤
1/2
1/3
1/4
MAX
⑥
1
POSITION
3
A SOURCE 1/2
2
⑨ L-KEY 1/2
2. Press the corner wipe button ⑦ repeatedly, Four patterns are available.
MODE CO
ONE-WAY
⑦
5
MIX
⑧
B SOURCE 1/3
4
WIPE
1)
1/4
6
EDGE
1!
B-KEY 1/2
5. Press the split wipe button 1) repeatedly, Four patterns are available.
VIDEO SOURCE SELECT
A
HDMI 1
HDMI 2
HD INPUT 1
HD INPUT 2
SD INPUT 1
SD INPUT 2
B
3. Press the diagonal wipe button ⑧ repeatedly, Four patterns are available.
6. Press the square wipe button 1! repeatedly. Four patterns below are available. Each pattern position in this section could be set by joystick ②.
4. Press the triangle wipe button ⑨ repeatedly, Four patterns are available.
14
BACK COLOR
MAX
POSITION
-10
-5 -15
-10 -3
-1 -5
0 -3
+1 -1
+2 0
+3 +1
+4 +2
A SOURCE L B SOURCE L
AUDIO
MULTIPLE PATTERN Selection: n
-15
L-KEY 1/2
ONE-WAY ONE-WAY REVERSE REVERSE MULTI
MULTI
③ 3
④ 3
⑤
1/2 1/3
1/3 1/4
1/4
3
-10
WIPE
1
WIPEPIP
PIP
2
-15 -5
EDGE
-10 -3
-1 -5
0 -3
+1 -1
+3 +1
1/3 1/4
1/4
+4 +2
+3
DB
+4
VIDEO ADJUST
ADJUST
⑫
MAX
MIX
MIXKEY
DEMO
4
ON
ONSTILL
EDGE
EDGE COLOR
COLOR
HDMI 1
HDMI 2
STILL PAINT A
HD INPUT 1
AUDIO F
A
KEY
⑥ 1/2 1/3
+2 0
DB
COLOR DB
VIDEO/AUDIO ADJUST ADJUST MIXER
MOSAIC PAINT NEGATIVE NEGATIVE
HD B INPUT 2
SD INPUT 1 B
DEMO
MOSAIC
A SOURCEA SOURCE B SOURCEB SOURCE 1/2
ST
+4
B-KEY 1/2
A 1/2
1/4
SELECT MODE CONTROL MODE CONTROL VIDEO SOURCE DIGITAL DIGITAL EFFECTSEFFECTS
FUNCTIONS FUNCTIONS
+3 DB
AUDIO
1/2LEVEL R LEVEL 1/3 R
CMX-12 CMX-12 VIDEO EFFECTS VIDEOMIXER EFFECTS MIXER
SD INPUT 2
BACK COLOR
4•
6 SCAN
O
SCAN AUTO
B
L-KEY 1/2 L-KEY B-KEY 1/2 1/2 B-KEY 1/2
SELECT OURCE SELECT
I2
-15
VIDEO/AUDIO VIDEO/AUDIO MIXER MIXER VIDEO
MAX
5
MIN
VIDEO
MAX
INPUT A
AUDIO FOLLOW AUDIO FOLLOW
INPUT A B INPUT
INPUTAUX B
AUXMIC
STA
MIC
MAX
MAXMAX
MAXMAX
MAXMAX
MAX
MIN
MIN MIN
MIN MIN
MIN MIN
MIN
1. Press the wipe button 1@. 2. Press the straight wipe button ⑥ for example. 3. Press the multi ⑤ button repeatedly to have the desired multiplication. Four patterns are available. 4. Press one of the A-bus selection button. 5. Press one of the B-bus selection button. 6. Operate the video slide 4&. * The same procedures apply to other patterns. A
A
ON
BACK HDMI HD INPUT 2 1HD INPUT HD INPUT 1 2HD INPUT SD INPUT 2 1SD INPUT SD INPUT 1 2SD INPUT 2 COLOR
B
ON
BACK COLOR
AUTO / WIPE AUTO / WIPE
B
MIN
MIN
START
START
ONE-WAY WIPE: n 1. 2. 3. 4. 5. 6.
Press the wipe button 1@. Press the straight wipe button ⑥ for example. Press the one-way ③ button. Press one of the A-bus selection button. Press one of the B-bus selection button. Operate the video slide 4&.
A bus
B bus
* The wipe scene moves the same way every time the control is operated.
REVERSE WIPE: n 1. 2. 3. 4. 5. 6.
Press the wipe button 1@. Press the straight wipe button ⑥ for example. Press the Reverse ④ button. Press one of the A-bus selection button. Press one of the B-bus selection button. Operate the video slide 4&.
15
A bus
B bus
* The wipe scene moves the reverse direction every time the control is operated.
1
POSITION -10 -5 -15
AUDIO LEVEL
D. Picture-In-Picture
-3
-1
0
+1
L
WIPE
ONE-WAY
-15
-10
-5
-3
-1
0
+1
B SOURCE DB
+2
+3
WIPE
-3
-1
0
+1
+2
+3
1/2
5
POSITION
COLOR
1/3 ON
⑥ A SOURCE
1/4
2
PAINT
STILL
⑦
⑧
-10
-5
D -3
-1
0
+1
+2
+3
1/3
1/4
⑨
⑩
⑪
L-KEY 1/2
B-KEY 1/2
B
VIDEO/AUDIO MIXER
ADJUST DIGITAL EFFECTS
PIP
ADJUST
A
VIDEO
A MIX
KEY
DEMO
MOSAIC
NEGATIVE
HDMI 1
HDMI 2 EDGE
ON
A
HD INPUT 1 COLOR
3
VIDEO SOURCE VIDEO/AUDIO SELECT MIXER INPUT A
MAX
AUDIO F
STILL
HD INPUT 2
SD INPUT 1 SCAN
SD INPUT 2
PAINT
NEGATIVE
1
BACK B COLOR
MOSAIC
4•
O
AUTO
B
VIDEO
AUDIO FOLLOW
INPUT B
MAX
MAX
MIN
VIDEO/AUDIO MIXER AUX
VIDEO MIC
MAX
MAX
INPUT A
MAX
AUDIO FOLLOW
MAX
INPUT B
MAX
Press the operation panel to initial mode: 1. Slide the video slide fully to the B-bus position. 2. Press one of the A-bus selection button. 3. Press one of the B-bus selection button. 4. Press the PIP button f. 5. PIP mode changes by selecting ⑥ ~ ⑪ buttons. ⑥. Shows sub-picture in 1/2 size without edge. ⑦. Shows sub-picture in 1/3 size without edge. ⑧. Shows sub-picture in 1/4 size without edge. ⑨. Shows sub-picture in 1/2 size with edge. ⑩. Shows sub-picture in 1/3 size with edge. ⑪. Shows sub-picture in 1/4 size with edge. 6. Other PIP features: 1. 3 PIP sizes selectable for sub-picture PIP channel. 2. The color of the edge can be changed by pressing back color select button ⑰. 3. When you slide the video slide •• to the A-bus position PIP picture dissolves into back ground scene. 4. Sub-picture PIP channel may be placed into different positions by oystick w.
AUX
MAX
A
ON
SD INPUT 2
BACK HDMI 1 COLOR
HDMI 2
HD INPUT 1
HD INPUT 2
B
ON
SD INPUT 1
SD INPUT 2
BACK COLOR
AUTO / WIPE
AUTO / WIPE
MIN
MIN
MIN
MIN
MIN
MIN
START
A bus B bus
+4
B-KEY 1/2
B SOURCE
1/2
ST
D
MAX
MAX KEY
+4
COLOR
-15
A
EDGE
-5
⑬
4 MIN MIX
-10
L AUDIO LEVEL EDGE R
1/4
DB
+4
VIDEO SOURCE SELECT MODE CONTROL
MULTI
-15
1/3
L-KEY 1/2
REVERSE
+4
1/2
FUNCTIONS DIGITAL EFFECTS
PIP
+3
A SOURCE
R
CMX-12 VIDEO EFFECTS MIXER
MODETIME CONTROL
+2
MIN
START
A bus
Edge
Unedge B bus
1/2
16
1/2
MIN
MIN
STA
M
1
1
POSITION -10 -5 -15
AUDIO LEVEL
E. KEY
-3
-1
0
+1
L
-10
-5
-3
-1
0
+1
ONE-WAY
REVERSE
-15
B SOURCE DB 1/3
+2
+3
L-KEY 1/2
MULTI
WIPE
-10
L AUDIO LEVEL EDGE R
1/4
DB
+4
-15
-5
-3
-1
0
+1
+2
+3
-10
-5
D -3
-1
0
+1
+2
+3
1
POSITION
1/2
⑥ 6
⑮
A SOURCE EDGE
COLOR
4
1/3 ON
1/4 STILL
⑦
⑧
ADJUST
A
VIDEO
1/3
1/4
⑨
⑩
⑪
L-KEY 1/2
B-KEY 1/2
2
PAINT
KEY
DEMO
MOSAIC
NEGATIVE
B
HDMI 1
HDMI 2 EDGE
ON
A
STILL
HD INPUT 1 COLOR
HD INPUT 2
SD INPUT 1 SCAN
SD INPUT 2
PAINT
MOSAIC
NEGATIVE
4•
5
BACK B COLOR
O
AUTO
B
3
VIDEO SOURCE VIDEO/AUDIO SELECT MIXER VIDEO
INPUT A
MAX
AUDIO F
A MIX
B SOURCE
1/2
+4
VIDEO/AUDIO MIXER
ADJUST DIGITAL EFFECTS
PIP
A MAX KEY
ST
D COLOR
MAX
MIN MIX
+4
B-KEY 1/2
VIDEO SOURCE SELECT MODE CONTROL
FUNCTIONS DIGITAL EFFECTS
PIP
+4
1/2
CMX-12 VIDEO EFFECTS MIXER
WIPE
+3
A SOURCE
R -15
MODETIME CONTROL
+2
AUDIO FOLLOW
INPUT B
MAX
MIN
VIDEO/AUDIO MIXER VIDEO MIC
AUX
MAX
MAX
MAX
INPUT A
AUDIO FOLLOW
INPUT B
MAX
Reset the operation panel to initial mode: How to use the Luma key effect: n 1. Press the KEY button h. FUNCTIONS MODE CONTROL 2. Press one of the A-bus selection button. 3. Press one of the B-bus selection button. 4. Press the LUMA KEY button o. 5. Use slide bar to control the Luma key level. 6. Press button y or u to change the source that is being keyed. 7. Press the LUMA KEY o once again to achieve Negative Luma Key. MAX
STA
AUX
MAX
M
MAX
CMX-12 VIDEO EFFECTS MIXER
A
ON
SD INPUT 2
BACK HDMI 1 COLOR
HDMI 2
HD INPUT 1
HD INPUT 2
B
SD INPUT 1
BACK COLOR
SD INPUT 2
ONE-WAY
REVERSE
MULTI
1/2
1/3
1/4
AUTO / WIPE
MIN
MAX
POSITION -10 -5MIN-3 -15
-1
0MIN +1
START L AUDIO LEVEL R
-10
-5
-3
-1
0
+1
REVERSE
PIP
MIX
KEY
+2
WIPE
MIN
-15
B SOURCE DB
+3
1/4
DB
-10
START L AUDIO LEVEL EDGE R
+4
-15
-5MIN-3
-1
0MIN +1
ON MIN +4 +2 +3
D
COLOR
-10
-5
-3
D -1
0
+1
+2
+3
VIDEO/AUDIO MIXER
ADJUST DIGITAL EFFECTS
PIP
ADJUST
A MAX KEY
1
POSITION
⑮
1/2
⑥ 6 A SOURCE
EDGE
COLOR
1/3 ON
1/4 STILL
⑦
⑧
A
PAINT
1/3
1/4
⑨ 4
⑩
⑪
B
AUDIO F
A MIX
KEY
DEMO
MOSAIC
NEGATIVE
ON
A
STILL
B SOURCE
1/2
L-KEY 1/2
2
HDMI 1
HDMI 2 EDGE
HD INPUT 1 COLOR
HD INPUT 2
SD INPUT 1 SCAN
SD INPUT 2
PAINT
NEGATIVE
5
BACK B COLOR
MOSAIC
4•
O
AUTO
B
B-KEY 1/2
3
VIDEO SOURCE VIDEO/AUDIO SELECT MIXER VIDEO
INPUT A
MAX
AUDIO FOLLOW
INPUT B
MAX
MAX
MIN
VIDEO/AUDIO MIXER AUX
VIDEO MIC
MAX
MAX
INPUT A
MAX
AUDIO FOLLOW
MAX
INPUT B
AUX
MAX
MAX
MIN
MIN
How to use the Blue key effect: n
1. Press the KEY button h. 2. Press one of the A-bus selection button. 3. Press one of the B-bus selection button. 4. Press the Blue KEY button a . 5. Use slide bar to control the Blue key level. 6. Press button y or u to change the source that is being keyed. 7. Press the Blue KEY a once again to achieve Negative Blue Key. A
ON
SD INPUT 2
BACK HDMI 1 COLOR
HDMI 2
HD INPUT 1
+4
VIDEO
MAX
MIN MIX
ST
B-KEY 1/2
VIDEO SOURCE SELECT MODE CONTROL
MULTI
MIN
1/3
L-KEY 1/2
FUNCTIONS DIGITAL EFFECTS ONE-WAY
MIN +4 +3
1/2
CMX-12 VIDEO EFFECTS MIXER
PIP
+2
A SOURCE
-15
WIPE
WIPE
AUTO / WIPE
MIN
MODETIME CONTROL
DIGITAL EFFECT
ON
TIME
HD INPUT 2
B
SD INPUT 1
ON
SD INPUT 2
BACK COLOR
AUTO / WIPE
MIN
AUTO / WIPE
MIN
MIN
START
MIN
MIN
MIN
MIN
START
17
STA
M
1/2
1/3
1/4
EDGE
B
COLOR
F. AUTO FADE/WIPE Selection Reset the operation panel to initial mode: 1. Press the ON button •• to enter into AUTO FADE/ WIPE mode. 2. FADE/WIPE transition time can be adjusted by operating TIME control q. 3. Press the WIPE button d for wipe effect. 4. Press the MIX button g for mix (fade) effect. 5. Press the START button •• to start Auto wipe or fade effect. L-KEY 1/2
SCAN
B-KEY 1/2
VIDEO SOURCE SELECT
VIDEO/AUDIO MIXER VIDEO
MAX
TIME
CMX-12 VIDEO EFFECTS MIXER AUDIO FOLLOW FUNCTIONS ONE-WAY
INPUT B CMX-12AUX MIC VIDEO EFFECTS MIXER
INPUT A
TIME
REVERSE
MAX
MAX MAX MODE FUNCTIONS CONTROL
MULTI
WIPE ONE-WAY
3
A
MIN
HDMI 1
HDMI 2
HD INPUT 1
HD INPUT 2
SD INPUT 1
SD INPUT 2
MAX
ON
1/2
BACK COLOR
1
POSITION
MIN 1/4
1/3
4•
MIX 1/2
4
POSITION
1/2
MIN
1/3
A SOURCE EDGE1/2
2
START B-KEY 1/2
VIDEO SOURCE SELECT
KEY 1/3
MIN
MIN
B SOURCE
COLOR1/3
MIN
B-KEY 1/2
VIDEO SOURCE SELECT
G. DIGITAL EFFECT Digital effect section which generates digital special n effects for the A bus and B-bus source video signals. The selected effect(s) can be added to either the A-bus or B-bus at one time. The mosaic effects is not available in sub-picture under n PIP mode. l••. A-bus, B-bus digital effect ON button. ⑲•$. STILL button. ⑳•%. PAINT button - 3 steps. •••^. NEGATIVE button. •••&. MOSAIC button - 3 steps.
1/4
MIN
L-KEY 1/2
AUDIO LEVEL
1/4
⑭
1/4
5)
5
L-KEY 1/2
MULTI
⑫
MAX
A SOURCE B SOURCE AUTO / WIPE
B
MAX
PIP REVERSE
VIDEO/AUDIO MIXE
-15
-10
-5
-3
-1
0
+1
+2
-15
-10
-5
-3
-1
0
+1
+2
VIDEO +3 +4
L
MAX
R +3
+4
CMX-12 VIDEO EFFECTS MIXER
FUNCTIONS
TIME
ONE-WAY
MIN
MAX
REVERSE
1/2
MULTI
1/3
WIPE HDMI 1
1/4
PIP HDMI 2
MIX
A SOURCE
1/3
MULTI 1/2 L-KEY
B-KEY 1/2
FUNCTIONS ONE-WAY
1/4
-15
KEY
EDGE
MODE CONTROL
REVERSE
WIPE
1/2
1/3
1/4
MIX
KEY
-5
-3
-1
0
B +1
+2
+3
+4 DB
STILL -10
-5
-3
PAINT -1
0
+1
•#
•$
•%
NEGATIVE +2
+3
•^
•&
ADJUST ADJUST
INPUT B
1/3
1/4
A
EDGE
AUDIO FOLLOW PAINT
NEGATIVE
MAX
MAX
HDMI 2 B-KEY 1/2
HD INPUT 1
HD INPUT 2
SD INPUT 1
SD INPUT 2
VIDEO/AUDIO MIXER
B
SCAN ON
BACK COLOR
MAX
MIN AUDIO FOLLOW
AUTO / WIPE INPUT A
MAX
INPUT B
MAX
AUX
MAX MIN
MIC
MIN MAX
START
A
ON
HD INPUT 1
MAX
MOSAIC
B
COLOR
VIDEO
HDMI 2
AUX
DEMO
B SOURCE
VIDEO SOURCE SELECT
HDMI 1
MIN
MOSAIC DB
+4
INPUT A
A
MAX
STILL
H. AUDIO MIXER Audio can be processed either n separately or in combination with a video source. 4* 4*. When the AUDIO FOLLOW's LED illuminate the Audio may be adjust 4( by Video slider 4• along with the video. When the LED is off the Audio will be 5) adjusted by 5! & 5@. 5!. Adjust A-bus's audio level. 4& 5@. Adjust B-bus's audio level. 5#. AUX: Controls the audio level of the auxiliary input. 5$. MIC: Controls the audio level of the microphone input. HDMI 1 L-KEY 1/2
••
VIDEO/AUDIO MIXER
POSITION
1/2
2•
SD INPUT 1
B
ON
A SOURCE
-10
ON -15
VIDEO
MAX
HD INPUT 2
A
L R
DIGITAL EFFECTS
PIP
BACK HD INPUT 1 COLOR
⑳
COLOR
VIDEO SOURCE SELECT
MIN
⑲
B
B SOURCE
1/2
A
SD INPUT HDMI 1 1 SD INPUT HDMI 2 2
HD INPUT 2
⑱
AUDIO LEVEL
CMX-12 VIDEO EFFECTS MIXER
A
DIGITAL EFFECTS
HD INPUT 1
POSITION
TIME
A
MODE CONTROL
HD INPUT 2
SD INPUT 1
SD INPUT 2
BACK COLOR
AUTO / WIPE
B
MIN
START
18
MIN
5!
MIN
5@
MIN
5#
MIN
5$
MIN
I. OSD ADJUST 2*. When turn off the OSD adjust in SD PREVIEW, output will show A/B-bus and output system information. As shown below. -15
AUDIO LEVEL
-10
-5
-3
-1
0
+1
+2
+3
+4
L
DB
R
DB
-15
-10
-5
-3
-1
0
+1
+2
+3
+4
CMX-12 VIDEO EFFECTS MIXER
INFORMATION
FUNCTIONS ONE-WAY
X
1/2
REVERSE
MULTI
A INPUT:HDMI 1 SYSTEM:1080I60 1/3 1/4
B INPUT:Y PB PR 1 A SOURCE B SOURCE SYSTEM:480P60 1/2
1/3
1/4
MODE CONTROL WIPE
DIGITAL EFFECTS
PIP
⑱
ADJUST
⑲
⑳
2•
••
2*
A MIX
KEY
DEMO ON
EDGE
STILL
PAINT
NEGATIVE
MOSAIC
•)
B
COLOR
OUTPUT:NTSC L-KEY 1/2
ADJUST
•#
•$
•%
SCAN
•^
•&
3)
B-KEY 1/2
2*. When turn ON the function in SD PREVIEW, output will show the adjust screen. As shown below. n When in MENU mode, press ⑲ t ⑳ u to adjust the MENU [1][2][3] page. Press 2! q qand 2@ p pto select the A PICTURE functions; once the functions are selected press ⑲ t tand ⑳ u uto adjust the value. CONTRAST [ 58] BRIGHT [ 31] n Above values are not save to EEPROM. When the COLOR [ 31] device is turn off the system will change the HUE [ 31] DETAIL [ 10] value back to previouse value. ASPECT [FULL] Press 2* ADJUST to exit the OSD adjust screen and the system will automatically save to the systerm. OSD adjustment function and range setting as below diagram: n
URCE SELECT
VIDEO/AUDIO MIXER VIDEO
INPUT A
MAX
AUDIO FOLLOW
INPUT B
AUX
MIC
MAX
MAX
MAX
MAX
MIN
MIN
MIN
MIN
A
ON
HDMI 2
HD INPUT 1
HD INPUT 2
SD INPUT 1
SD INPUT 2
BACK COLOR
AUTO / WIPE
B
MIN
START
[1]A PICTURE
MENU
[2]B PICTURE
[3]SETUP
CONTRST BRIGHT COLOR HUE DETAIL ASPECT
[ 58] [ 31] [ 31] [ 31] [ 10] [FULL]
0~63 0~63 0~63 0~63 0~63 AUTO FULL 16:9 4:3
CONTRST BRIGHT COLOR HUE DETAIL ASPECT
[ 58] [ 31] [ 31] [ 31] [ 10] [FULL]
0~63 0~63 0~63 0~63 0~63 AUTO FULL 16:9 4:3
A AUDIO B AUDIO VOLUME LIP SYNC OUTPUT DEFAULT
[AUTO] [AUTO] [ 127] [ 33MS] [NTSC]
AUTO-CH1-CH2-CH3-CH4-CH5-CH6 AUTO-CH1-CH2-CH3-CH4-CH5-CH6 0~127 0~170 NTSC-NTSC 43-PAL-PAL M-PAL N SECAM-480P60-576P50-720P50720P60-1080I50-1080I60
19
5. Connector and Installation
HD Y PB PR 1
HD AUDIO INPUT R1
L1
R2
Other Audio Source
HD Y PB PR 2
SD AUDIO INPUT L2
R1
Y
HD INPUT 1 Pb
L1
R2
Pr
AUX INPUT L2
R
SD INPUT 1 V
L1
R2
L2
Pr
SD PREVIEW V
S DC INPUT 12V 3.0A
HDMI OUTPUT
HDMI 2 Y
HDMI 1
AUDIO OUTPUT R1
HD OUTPUT 1 Y Pb
S
HDMI INPUT HDMI 1
L
Pb HD INPUT 2
HDMI 2
Pr
V SD INPUT 2
S
SD 1
Y Pb HD OUTPUT 2
SD 2
TV
Pr
V SD OUTPUT
S
VCR or TV
MONITOR
The output can select HD or SD system. Users can use SD PREVIEW to adjust n
the output system, or a fast way to switch is to press two keys for 1 second in the same time. The combination as below:
2( butten+ 4% butten → 480P60 3) butten+ 4% butten → 576P60 3! butten+ 4% butten → 720P50 3@ butten+ 4% butten → 720P60 3# butten+ 4% butten → 1080I50 3$ butten+ 4% butten → 1080I60 3% butten+ 4% butten → NTSC 3^ butten+ 4% butten → NTSC 43 3& butten+ 4% butten → PAL 3* butten+ 4% butten → PAL M 3( butten+ 4% butten → PAL N 4) butten+ 4% butten → SECAM
20
6. Specifications
Source Input
X 6(SOURCE 1/6) HDMI Input: x2 Digital Video YUV(480i/p,576i/p,720p50/60,1080i50/60, 1080p50/60). Component Input: x2 Analog Video YUV(480i/p,576i/p,720p50/60,1080i50/60). Y/C input: x2 Y signal: 1.0 Vp-p 75Ω, Mini Din 4-pin connector C signal: 0.3 Vp-p 75Ω, Mini Din 4-pin connector Video input: x2 1.0 Vp-p 75Ω composite signal, Pin-Jack (NTSC,NTSC4.43,PAL,PAL-M,PAL-N,SECAM) Audio input: x4 -6 dBs/20 kΩ Pin Jack (L/R).
External Sound Input
MIC input: x 1 (MIC); -60 dBv/600Ω AUX input: x 1 (AUX); -6 dBs/20 kΩ, Pin Jacks(L/R)
Recording Output
HDMI Output: x1 Digital Video YUV(480i/p,576i/p,720p50/60,1080i50/60). Component Output: x2 Analog Video YUV(480i/p,576i/p,720p50/60,1080i50/60). Y/C Output: x1 Y signal: 1.0 Vp-p 75Ω, Mini Din 4-pin connector C signal: 0.3 Vp-p 75Ω, Mini Din 4-pin connector Video Output: x1 1.0 Vp-p 75Ω composite signal, Pin-Jack (NTSC,NTSC4.43,PAL,PAL-M,PAL-N,SECAM) Audio Output: x2 -6 dBs/20 kΩ Pin Jack (L/R).
Preview Output(OSD)
Y/C Output: x1 Y signal: 1.0 Vp-p 75Ω, Mini Din 4-pin connector C signal: 0.3 Vp-p 75Ω, Mini Din 4-pin connector Video Output: x1 1.0 Vp-p 75Ω composite signal, Pin-Jack (NTSC,NTSC4.43,PAL,PAL-M,PAL-N,SECAM)
Headphone Output
x 1 (Headphone); -20 dBv~ -80 dBv, 8Ωunbalance, phone-5 jack
Effects
Video: Still, Mosaic, Paint, Negative, Wipe, Mix, Fade, Picture-In-Picture, Chroma key, Luminance key
Back Color x3 Wipe Patterns S/N (Typical) Power Source Power Consumption Dimensions Weight
White, Yellow, Cyan, Green, Magenta, Red, Blue, Black 96 patterns video: 48 dB (composite), 50 dB (HDMI,Component,Y/C) Audio: 60 dB 12V DC 3A Approx. 15W 267(W) x 370(D) x 103.5(H) mm 2Kgs
21
A
Acronyms Acronym
Complete Term
22
CYPRESS TECHNOLOGY CO., LTD.
Home page: http://www.cypress.com.tw
20101230 MPM-CMX12
