Preview only show first 10 pages with watermark. For full document please download

Coaxial Speed Dome Camera Quick Manual

   EMBED

Share

Transcript

Coaxial Speed Dome Camera Quick Manual 1. Configuration Transmit Video+Data+Power without adaptor When transmit Video+Data only, Use external adaptor Coaxial SpeedDome Camera transmit video+data+power simultaneously by using One Coaxial cable. When only transmit video+data due to long transmission distance, it has to use external adaptor (DC12V,1.5A), and the camera has to be Power S/W Off. 2. Video signal, Data signal and power transmission distance as coaxial cable type. Cable type DC Resis.Ω /200m Inner conductor ECX 3C-2V 18.28 Copper Type Annealed ECX 5C-2V 8.48 Annealed 0.8 780 650 20 Bare 1.02 890 210 8.32 Annealed 1.2 1,000 650 7.6 Bare 1.63 1,380 730 3.96 Annealed 1.8 1,380 1,290 RG-59/U 9.1 Annealed 0.81 690 590 5C-HFBT 7C-HFBT Dia. (mm) 0.5 Operation distance (m) Video+DATA Video+DATA+POWER 460 240 RG-6/U 6.1 Annealed 1.01 890 890 RG-11/U 3.7 Annealed 1.63 RG-11A/U 6.2 Bare 1.63 1,300 930 1,300 930 ※ The operation distance could be changed according to installation condition or cable connection status Coaxial Speed Dome Camera Quick Manual 3. Configuration 4. Coaxial cable connection When you want to extend or terminate coaxial cable, connect the cable as below. • BNC Connection • F Connection BNC-M - BNC (JJ extension connector) - BNC-M F connector - F extension – F connector Coaxial cable’s terminate part (Connect to receiver) has to connect BNC-F or F connector as above. Good BAD Connecting a 75Ω BNC-F connector at the terminal of coaxial cable Twist coaxial cable or connect with RCA cable by * Please do not connect an RCA cable with Coaxial cable. tapping