Transcript
FIBER / 9000 SERIES
9213-2OE 〉〉 DUAL 3G/HD/SD-SDI FIBER RECEIVER The 9213-2OE is a dual 3G/HD/SD-SDI fiber receiver (OE) card. The card converts six fiber optic signals to independent SDI output signals. The 9213-2OE detects the incoming fiber signal and outputs the up to six SDI signals over six BNC connectors. Card-edge LED indicators identify the presence of incoming video and the identified signal data rate. The 9213-2OE is fully hot swappable with all active components on the front removable module. No active components are installed on the rear module, greatly reducing down time and eliminating any need for users to access the back of the rack frame. Up to 20 cards can be used in the 20-Slot frame to acheive a density of 40 optical to electrical conversions in 2RU.
〉〉 FEATURES Supports single-mode fiber
LC/UPC optical connection
Reclocking at 270 Mbps, 1.483 Gbps, 1.485 Gbps, 2.967 Gbps, and 2.970 Gbps
Automatic detection of incoming data rate
LED indicators for signal presence and data rate Remote monitoring via DashBoard™ software or OGCP-9000 control panel
DA
3G/HD/SD Fiber In A
3G/HD/SD Fiber In B
Optical to Electrical Converter
Optical to Electrical Converter
Ethernet 10/100 (On Frame)
Reclock
Reclock
Five year warranty
Buffer
Buffer
DA
DA
CARD 2
CARD 1
FIBER IN A
FIBER IN A
FIBER IN A
FIBER IN B
FIBER IN B
FIBER IN B
SDI OUT A1 SDI OUT A2
SDI OUT A1 SDI OUT A1
SDI OUT A3
SDI OUT A4
SDI OUT A2
SDI OUT A2
SDI OUT B1
SDI OUT B2
SDI OUT B1
SDI OUT B1
3G/HD/SD - SDI Reclocked Out 3G/HD/SD - SDI Reclocked Out
3G/HD/SD - SDI Reclocked Out
RM20-9213-B
RM20-9213-B/S
DashBoard™/OGCP Monitor/Control 9213-FRxRx
〉〉 SPECIFICATIONS Electrical Power:
5 watts
Optical Input Number of Inputs: 2 Standard: 143-360 Mbps - SMPTE 259M 1.485 Gbps - SMPTE 292 3 Gbps - SMPTE 424M Operating Wavelength Range: 1210 nm to 1600 nm Connector Type: Single Mode, LC/UPC
SDI Outputs Number of Outputs: Return Loss: Connector Type:
Full Rear Module: 6 Split Rear Module: 3 >15 dB to 1.485 GHz >10 dB from 1.485 GHz to 2.97 GHz BNC
〉〉 ORDERING INFORMATION 9213-2OE Dual 3G/HD/SD Fiber Receiver Card
COBALTDIGITAL.COM
RM20-9213-B 20-Slot Frame Rear I/O Module (Standard Width) with 2 Optical LC Inputs, 4 Reclocked Outputs
of Input 1 and 2 Reclocked Outputs of Input 2 RM20-9213-B/S 20-Slot Frame Rear I/O Module (Split) 2 Optical LC Inputs, 2 Input A Reclocked Output BNCs,
US SALES 800 669-1691 / DIRECT +1 217-344-1243 /
[email protected] SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. E. & O.E. ©2013 COBALT DIGITAL INC. 3/2013
