Transcript
TIMECODE INSERTION / 9000 SERIES
9391 〉〉 3G/HD/SD-SDI TIMECODE BURN-IN INSERTER
NC
NC
NC
GBA
LTC I/O A
The 9391 3G/HD/SD-SDI Timecode Burn-In Inserter allows SMPTE embedded or RS-485 LTC to be burned onto SDI video. The card can burn timecode and up to 16 characters of static text onto program video. A failover/manual select function provides for a user-selectable flat-field to replace program video either as a manual selection or upon loss of input video. The generated flat-field can be timed to input video, or to a NC SDI IN A frame reference signal. Timecode burn-in and text can be sized and positioned anywhere in the active video area using easy-to-use positioning controls. The 9391 also includes a 2x4 SDI output crosspoint, with processed or reclocked input video routable to up to four SDI outputs. 〉〉 FEATURES Economical, single-card solution for timecode burning Full timecode support – burn-in timecode from selected SMPTE embedded formats or RS-485 LTC. Free-run (self generated) timecode can be set for count-up or count-down with wrap or halt at zero count.
Easy to configure manually invoked or automatic failover flat-field generation. Also provides identification text burn-in.
Convenient built-in 2x4 SDI output crosspoint DashBoard™ and OGCP-9000 remote control simplifies setup and operation
3G/HD/SD-SDI compatible. Generated flat-field can match input format, or be set to provide any of several output formats regardless of input video format.
Five year warranty
Input RCLK
3G/HD/SD SDI In
Output
EQ/ Reclock
Timecode Burn-In
Flat-Field Generator
Ident Text Burn-In
Processed Crosspoint
SDI OUT 2
SDI OUT 3
SDI OUT 4
RM20-9391-D
3G/HD/SD SDI Out 1 2 3 4
LTC ti text bu positio
Timec sec; s sec:fra
Insertion Manual/ Failover Control
Input Video Ref 1 (From Frame)
SDI OUT 1
Flat-Field Timing Select
Ethernet 10/100 (On Frame)
LTC timecode and static ID text burn-in size and position configurable.
DashBoard™/OGCP Monitor/Control
RS-485 LTC In/Out
Timecode can be set for: sec; sec:frames; sec:frames:field 9391
〉〉 SPECIFICATIONS Power
< 25 Watts
Timecode Insertion Uses RS-485 LTC source, with free-run failover in absence of external LTC. Free-run start time can be user configured. Burn-in enable/disable user controls. Configurable for burnin string of seconds, seconds:frames, seconds:frame:field. User controls for text size and H/V position. Flat Field Insertion Enable/disable manual user controls, with selectable failover upon loss of input video. Flat-field output format is user selectable. Flat-field raster color selectable from nine colors. Identification Text Insertion Enable/disable manual user controls. Up to 16 ASCII character entry field. User controls for text size and H/V position.
Video Input/Output SDI inputs: (1) 75Ω BNC SDI outputs: (4) 75Ω BNC via 2x4 crosspoint Formats (pass-thru and burn-in/flat-field): SD: 486i59.94, 576i50 HD: 1080i59.94, 1080i50, 1080p24, 1080p23.98, 1080psf24, 1080psf23.98 720p59.94, 720p50, 720p24, 720p23.98 3G: SMPTE 425A: 1080p59.94, 1080p50 Cable Length: 3G/HD/SD: 120/180/320 m (Belden 1694A) Return Loss: >15 dB up to 1.485 GHz >10 dB up to 2.970 GHz Alignment Jitter: 3G/HD/SD: < 0.3/0.2/0.2 UI Timing Jitter: 3G/HD/SD: < 2.0/1.0/0.2 UI
LTC Input 3-terminal Phoenix connector, supporting RS-485 LTC input (– (A), +(B), GND) Frame Reference Input Signal: SMPTE 170M/318M “Black Burst” SMPTE 274M/296M “Tri-Level” Return Loss: >35 dB up to 5.75 MHz Processing Latency Less than 25 samples
〉〉 ORDERING INFORMATION 9391 3G/HD/SD-SDI Timecode Burn-In Inserter
COBALTDIGITAL.COM
RM20-9391-D RM20-9391-D 20-Slot Frame Rear I/O Module (Standard Width) 3G/ HD/SD-SDI Input, RS-485 LTC Input/Output, (4) 3G/HD/SD-SDI Outputs (crosspoint selectable)
US SALES 800 669-1691 / DIRECT +1 217-344-1243 /
[email protected] SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. E. & O.E. ©2014 COBALT DIGITAL INC.
