Transcript
TIMECODE INSERTION / 9000 SERIES
9392 〉〉 3G/HD/SD-SDI DUAL-CHANNEL TIMECODE BURN-IN INSERTER
GB A
SDI OUT 2
SDI OUT 3
SDI OUT 4
NC
〉〉 FEATURES Economical, single-card solution for timecode burning Full timecode support – burn-in timecode from selected SMPTE embedded formats or RS-485 LTC. Free-run (self generated) timecode can be set for count-up or count-down with wrap or halt at zero count.
Provides timecode burn-in for two SDI streams. Also provides identification text burn-in, with independent text entry and attribute controls for each SDI channel. Supports independent LTC input for each program video channel. Easy to configure manually invoked or automatic failover flat-field generation.
3G/HD/SD-SDI compatible. Generated flat field can match input format, or be set to provide any of several output formats regardless of input video format. Each channel can be individually configured for failover and output formats. Convenient built-in 3x4 SDI output crosspoint
LTC I/O B
SDI OUT 1
NC
GBA
LTC I/O A
The 9392 3G/HD/SD-SDI Dual-Channel Timecode Burn-In Inserter allows individual SMPTE embedded timecode or RS-485 LTC inputs to be burned onto two respective, independent SDI video streams. The card can burn timecode and up to 16 characters of static text onto program video. Independent, per-channel failover/manual select function provides for a user-selectable flatfield to replace program video either as a manual selection or upon loss of input video. The generated flat-field can be timed to input video, or to a frame reference signal. Timecode burn-in and text can be sized and positioned anywhere in the SDI IN B SDI IN A active video area using easy-to-use positioning controls. The 9392 also includes a 3x4 SDI output crosspoint, with SDI Out A (channel A), SDI Out B (channel B), or reclocked SDI In A routable to up to four SDI outputs.
RM20-9392-D
Five year warranty
DashBoard™ and OGCP-9000 remote control simplifies setup and operation
3G/HD/SD SDI In A
EQ/ Reclock
Timecode Burn-In
Flat-Field Generator
LTC timecode and static ID timecode and static ID textLTC burn-in size and position text burn-in is size and configurable.
Ident Text Burn-In
Insertion Manual/ Failover Control
position configurable.
Timecode be set for Timecode can be can set for: sec:frames; sec;sec; sec:frames; sec:frames:field
3G/HD/SD SDI Out 1 SDI A Out 2 Output 3 Crosspoint SDI B Out 4 RCK SDI In A
RS-485 LTC In/Out (SDI A) Input Video A Input Video B Ref 1
sec:frames:fields
(From Frame)
Flat-Field Timing Select
Flat-Field Generator
3G/HD/SD SDI In B
Insertion Manual/ Failover Control
EQ
〉〉 ORDERING INFORMATION Timecode Burn-In
Ethernet 10/100 (On Frame)
RS-485 LTC In/Out (SDI B)
9392 3G/HD/SD-SDI Dual-Channel Timecode Burn-In Inserter
Ident Text Burn-In
DashBoard™/OGCP Monitor/Control 9392
RM20-9392-D RM20-9392-D 20-Slot Frame Rear I/O Module (Standard Width) (2) 3G/HD/SD-SDI Inputs, (2) RS-485 LTC Inputs/Outputs, (4) 3G/ HD/SD-SDI Outputs (crosspoint selectable)
〉〉 SPECIFICATIONS Power
< 25 Watts
Timecode Insertion Uses RS-485 LTC source, with free-run failover in absence of external LTC. Free-run start time can be user configured. Burn-in enable/disable user controls. Configurable for burn-in string of seconds, seconds:frames, seconds:frame:field. Independent controls and LTC inputs for each SDI input channel. Identification Text Insertion Enable/disable manual user controls. Up to 16 ASCII character entry field. User controls for text size and H/V position. Independent controls for each SDI channel. LTC Input (2) 3-terminal Phoenix connectors, supporting independent (per channel) RS-485 LTC input (– (A), +(B), GND)
COBALTDIGITAL.COM
Flat Field Insertion Enable/disable manual user controls, with selectable failover upon loss of input video. Flat-field output format is independently user selectable for each output channel. Flat-field raster color selectable from nine colors. Note: Both program video inputs must be of the same refresh rate (e.g., 59.94 or 50, or co-related (29.97 or 25)), and co-synchronous using frame sync or similar means. In practical application, both inputs should be frame-synchronized using a common frame reference, with the same reference also to be used by this card. Frame Reference Input Signal: SMPTE 170M/318M “Black Burst” SMPTE 274M/296M “Tri-Level” Return Loss: >35 dB up to 5.75 MHz
Video Input/Output SDI inputs: (2) 75Ω BNC SDI outputs: (4) 75Ω BNC via 3x4 crosspoint Formats (pass-thru and burn-in/flat-field): SD: 486i59.94, 576i50 HD: 1080i59.94, 1080i50, 1080p24, 1080p23.98, 1080psf24, 1080psf23.98 720p59.94, 720p50, 720p24, 720p23.98 3G: SMPTE 425A: 1080p59.94, 1080p50 Cable Length: Return Loss: Alignment Jitter: Timing Jitter:
3G/HD/SD: 120/180/320 m (Belden 1694A) >15 dB up to 1.485 GHz >10 dB up to 2.970 GHz 3G/HD/SD: < 0.3/0.2/0.2 UI 3G/HD/SD: < 2.0/1.0/0.2 UI
Processing Latency Less than 25 samples
US SALES 800 669-1691 / DIRECT +1 217-344-1243 /
[email protected] SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. E. & O.E. ©2014 COBALT DIGITAL INC.
