Transcript
COB PAR56 white User Manual Our COB PAR56 light offers many possibilities to achieve very nice laser effects which you want. It is specially designed for the stages, disco, night clubs etc. Please read the manual before operation. A. SPECIFICATION 1. Voltage: AC 100V-260V, 50Hz/60Hz 2. Power consumption: 82W 3. LED: COB 70W white 4. Color temperature: 6500K -7000K 5. LED display for easier operation
B. OPERATION How to operation the modes: There are four kinds of mode can choose: Built-in programs, monochrome dimming, DMX mode, master/slave mode. 1. Press the “MODE”, the LED display will show Enter into built-in programs mode (fade to bright or fade to black), press the “MODE” for a long time, the LED display will switching among the current main menus, LED fading speed, LED flash speed. 1) Press the “MODE”, when LED display show beginning with through “UP” or “DOWN” select speed
~
.
2) Press the “MODE”, when LED display show beginning with through “UP” or “DOWN” can select the strobe speed
, release the button can set LED fading speed,
~
, release the button can set LED strobe speed, .
3) In the settings menu, lightly press the “MODE” can return the main menu of current mode, press again enter into next mode menu.
2. Press the MODE, the LED display will show Enter into monochrome dimming mode. Press the “MODE” for a long time, the LED display will switching among
the current main menus, LED brightness, LED flash speed. 1) Press the “MODE”, the LED display will show can adjust the brightness.
~
, release the button, through “UP” or “DOWN”
2) Press the “MODE”, when the LED display show beginning with strobe speed, through the “UP” or “DOWN” can select the strobe speed
, release the button to set current LED ~
.
3) In the settings menu, press the “MODE” to return current mode main menu, press again enter into next mode menu.
3．Press the MODE, the LED display will show Enter into the main menu of DMX mode. Press the “MODE” for a long time, the LED display will switching among the current main menu, DMX address, DMX mode. The fixture can automatically identify the DMX signal, if received the DMX signal when the fixture operation in DMX mode, the third digits of LED display will flash, to prompt received the DMX signal; if the DMX signal disappears will restore the previous mode. 1) Press the “MODE”, if the LED display show can adjust current DMX address.
~
, release the button, through “UP” or “DOWN”
2) Press the “MODE”, if the LED display show
or
, release the button, through “UP” or “DOWN”
can adjust current DMX mode. Sheet 1
DMX 1CH function
CHANNEL
NUMBER
FUNCTION
1
0-255
LED brightness 0-100%
Sheet 1
DMX 2CH function
CHANNELS
NUMBER
FUNCTION
1
0-255
LED brightness 0-100%
0-19
LED no strobe
2
20-255
LED strobe，the high number, the high strobe frequency
3) In the settings menu, press the “MODE” lightly, return to current mode main menu, press again enter into next mode menu.
4. Press the MODE, the LED display will show Enter into master/slave mode. If not received host signal, LED is in off state; if receiving the host signal, will follow host operation.
5．Restore factory settings 1) Press the “MODE” lightly, the LED display will show
, enter into the settings main menu.
2) Press the “MODE” for a long time, the LED display will show
, release the button, at this time press the
“UP” can restore factory settings. 3) When the fixture is unable normal startup, can press the “MODE” + “UP”, then power on, until the LED display show
and flash, release the button to restore factory settings.
