Transcript
Coco user guide March 13, 2017
Introduction Unpack the Coco from its packaging and make sure all the parts are there. Inspect the device visually for any damage. The package contains: • Coco tracking device The optional accessories may include: • Mounting screws • User guide • USB cable The USB port is used for starting up the device. The Coco comes fully charged and ready to use so charging is not required. The LED status indicator blinks when the Coco is communicating with PackAware. The power switch is not operational in this device version.
Starting up the Coco Follow these steps to start up the Coco. Once started up, the Coco will collect data and communicate with PackAware automatically once an hour. 1. Connect one end of the USB cable to USB port on the Coco. 2. Plug the other end of the USB cable into a charged power bank or available port on the computer. Make sure the power bank or the computer is turned on. 3. LED will blink green while connecting to the network. If LED does not start blinking: • Make sure that USB cable is securely connected at both end.
• Load power bank or try another power source. 4. Remove USB cable after LED has blinked.
Mounting the Coco to the package 1. Use 4x45mm screws or other reliable fastener to mount the Coco to the package firmly. Coco should be installed inside the package.
Coco has four 4 mm mounting holes as shown in the diagram.
Linking to PackAware service The Coco must be linked to order in PackAware to access the data. You will need Coco product key to link the Coco. The product key is printed on a sticker on the Coco. Copy the product key manually or use a barcode reader. 1. Locate the product key sticker. 2. Use the product key to complete the linking as shown in the PackAware documentation "Pack" (https://packaware.com/Support/Documentation/Pack).
Disposal After the package reaches its destination, the Coco should be recycled as described in the "Coco disposal guide" (https://packaware.com/Support/Documentation/Coco-disposalguide). A printed copy of the disposal guide should be placed among the packing list for the recipient.
