Transcript
MSTronic Co., Ltd. 2F, 12, Gongshang Rd., Wugu District, ew Taipei City, 248 Taiwan TEL:886-2-2293-0159
FAX:886-2-2292-8851
E.MAIL:
[email protected] WEB: http://www.mse.com.tw
SPECIFICATION COE-01-PSE Coax over Ethernet with PoE Injector 1.
INPUT :
1.1
Input Voltage:
AC 90V ~ 264V @120V/230V
1.2
Input Frequency :
47 ~ 63hz
1.3
Input Current:
1.02A at 120Vac @F.L 0.63A at 230Vac
1.4 2. 2.1
Inrush current:
25A Max at 120Vac & 50A Max at 230Vac
OUTPUT : Output Voltage & Current: OUTPUT Max.
load
+56V 0.9A
Power
50.4W Max
Min. Load
0A
Load reg. % Line reg. % Ripple % Noise % Note 1:
Ripple & Noise bandwidth is from DC to 20Mhz. Terminated With a 47uF Capacitor and 0.1uf MPE Capacitor of Proper Polarity.
3.
EFFICIENCY :
80% min. at AC 120V Input @F.L
4.
PROTECTION
4.1
Short Circuit Protection output Short GND Terminal will not damage the Power Supply will Auto-recover when Load status going to normally.
4.2
Over Voltage Protection : 59V ~ 65V
4.3
Over Current Limits : 150% ~ 200% @90V ~ 240Vac
4.4
Input with Fuse Protection
4.5
LED on indicates PWR - OK
MSTronic Co., Ltd. 2F, 12, Gongshang Rd., Wugu District, ew Taipei City, 248 Taiwan TEL:886-2-2293-0159
FAX:886-2-2292-8851
E.MAIL:
[email protected] WEB: http://www.mse.com.tw
5.
EMC : Meet FCC Class B EN55022 Class B
5.1
SAFETY STANDARD : Meet UL1950, CSA 22.2 & TUV EN60950
5.2
Hold up time :6mS min. at maximum load &120Vac Input.
6.
GENERAL DESCRIPTION
6.1
Operation Temperature:
-25
- +60 Degree
6.2
Storage Temperature:
-40
- +85 Degree
6.3
Operation Humidity:
5% -
6.4
Cooling:
Free air cooling
6.5
SIZE
90 x 118 x 40 (L*W*H)m/m
6.6
Mount:
90%
DIN Rail mountable
7. RJ45 Connected and pin out: RJ-45 #2 for Data Input (Data Only)
RJ-45 #1 for PoE Output (Data & Power)
Pin
Symbol
Description
Symbol
Description
1
RX+
Data Receive
-Vdc + RX+
Power(-) +Data Receive+
2
RX-
Data Receive
-Vdc + RX-
Power(-) +Data Receive-
3
TX+
Data Transmit
+Vdc + TX+
Power(+) +Data Transmit+
4
NC
Not Connector
Video 2/ CTRL
Video 2 or Control signal
5
NC
Not Connector
Video 2/ CTRL
Video 2 or Control signal
6
TX-
Data Transmit
+Vdc + TX-
Power(+) +Data Transmit
7
NC
Not Connector
Video 1
Video signal 1
8
NC
Not Connector
Video 1
Video signal 1
8. Video Transmission : Using 2 spar Pairs CAT5 Cable to Transmit/Receive 2 sets Video Signals or 1 set Video Signal + 1 Control Signal. 8-1. Connector : F-Type *2 (for Video) 2 pin Terminal Block: (CON4) (for RS-422 or RS-485 Data Transmission) 8-2. Two Passive Transceiver 8-3. Video Input : 1Vp-p ,75 Transmission Distance : 600m(B/M) , 400m(Color), 100m(PoE) 8-5. Ethernet cable Pin 4 & 5 Carry Video signal or Control signal Pin 7 & 8 Carry Video signal
MSTronic Co., Ltd. 2F, 12, Gongshang Rd., Wugu District, ew Taipei City, 248 Taiwan TEL:886-2-2293-0159
FAX:886-2-2292-8851
E.MAIL:
[email protected] WEB: http://www.mse.com.tw
MSTronic Co., Ltd. 2F, 12, Gongshang Rd., Wugu District, ew Taipei City, 248, Taiwan TEL:886-2-2293-0159
FAX:886-2-2292-8851
E.MAIL:
[email protected] WEB: http://www.mse.com.tw
SPECIFICATION COE-02-PD Coax over Ethernet with PoE Splitter 1.
INPUT :
1.1
Input Voltage:
DC40V to DC60V NORMAL=56V
1.2
Under Voltage Lockout:
DC 31 ~ 32V Stare Voltage =-33V ~ 35.5V
2.
OUTPUT :
2.1
Output Voltage & Current: OUTPUT Max.
+12V
load
2.1A
Power
25W Max
Min. Load(2)
0.1A
Load reg. % Line reg. % Ripple %(1) Noise %(1) Note 1:
Ripple & Noise bandwidth is from DC to 20Mhz. Terminated With a 47uF Capacitor and 0.1uf MPE Capacitor of Proper
Polarity. Note 2: to match up PSE 3. 4.
EFFICIENCY : 82% min @-48Vin dc PROTECTION
4.1 Short Circuit Protection output Short GND Terminal will not damage the Power Supply and will Auto-Reset. Over Load Protection is auto-recovery. 4.2 Operation frequency is 150KHZ 4.3 Isolation Voltage : 1500Vdc 4.4 Isolation Resistance :100M ohms (min) 4.5 Input Set class Resistance : 25K ohms 4.6 Maximum Capacitive Load : 470UF (24V = 100UF)
MSTronic Co., Ltd. 2F, 12, Gongshang Rd., Wugu District, ew Taipei City, 248, Taiwan TEL:886-2-2293-0159
FAX:886-2-2292-8851
E.MAIL:
[email protected] WEB: http://www.mse.com.tw
4.7 Indicator light Green: active as 802.3at Model. Indicator light Red: active as 802.3af Model 5.
EMC : Meet FCC Class B EN55022 Class B
5.1
SAFETY STANDARD : Meet UL1950, CSA 22.2 & TUV EN60950
5.2
Hold up time :6mS min. at maximum load &120Vac Input.
6.
GENERAL DESCRIPTION
6.1
Operation Temperature:
-25
- +60 Degree
6.2
Storage Temperature:
-40
- +85 Degree
6.3
Operation Humidity:
5% -
6.4
Cooling:
Free air cooling
6.5
SIZE
90 x 118 x 40 (L*W*H)m/m
6.6
Mount:
90%
DIN Rail mountable
7. RJ45 Connected and pin out: RJ-45 1 for PoE Input (Data + PoE)
RJ-45 2 for Data Output (Data Only)
Pin
Symbol
Description
Symbol
Description
1
-Vdc + RX+
Power(-) +Data Receive+
RX+
Data Receive
2
-Vdc + RX-
Power(-) +Data Receive-
RX-
Data Receive
3
+Vdc + TX+
Power(+) +Data Transmit+
TX+
Data Transmit
4
Video 2/ CTRL
Video 2 or Control signal
NC
Not Connector
5
Video 2/ CTRL
Video 2 or Control signal
NC
Not Connector
6
+Vdc + TX-
Power(+) +Data Transmit
TX-
Data Transmit
7
Video 1
Video signal 1
NC
Not Connector
8
Video 1
Video signal 1
NC
Not Connector
8. Video Transmission : Using 2 Pairs CAT5 Cable to Transmit/Receive 2 sets Video Signals or 1 set Video Signal Plus 1 Control Signal . 8-1. Connector : F-Type *2 (for Video) 2 pin Terminal Block : HD-515RC 2P(CON8) (for RS-422 or RS-485 Data Transmission) 8-2. Two Passive Transceiver. 8-3. Video Input : 1Vp-p ,75 Transmission Distance : 600m(B/M) , 400m(Color), 100m (PoE)
MSTronic Co., Ltd. 2F, 12, Gongshang Rd., Wugu District, ew Taipei City, 248, Taiwan TEL:886-2-2293-0159
FAX:886-2-2292-8851
E.MAIL:
[email protected] WEB: http://www.mse.com.tw
8-5. Cat5 Pin 4 & 5 Carry Video signal or Control signal Pin 7 & 8 Carry Video signal 9. OUTPUT CONNERTER : HD-515R8C 5P(CON6)
