Commercial Exit Signs Vch Series Ce

Transcript

CE-14200 codes and standards LED/lamps • ETL listed to UL Standard 924 • NFPA 101 (Life Safety Code) • NFPA 70 (National Electric Code) • Exit face illumination is provided by a special high intensity indirect red or green LED strip. Letter brightness and illumination uniformity exceed UL requirements. • Uniform 6" letter illumination (3/4" stoke). • Standard emergency unit contains 6 Volt, 5 Watt MR11 Lamps. • Lamps can be rotated 180 degrees horizontally and are on a fixed vertical axis for maximum light distribution. • The lamps may be adjusted or replaced without the need to remove the faceplate. construction • All units have a white finish. • All units are flame rated with a UV stable ABS thermoplastic housing. • Units come as single faced units only. • Combo provided with an extra stencil face and field mounted ceiling kit. installation Commercial Exit Signs VCH Series Value+II Thermoplastic Combo battery • Snap together quick mount design. • Wall or ceiling mounted only. • Pop out chevron directional indicators are easily removed when required. • Exit sign mounts up to a standard 4" square outlet box. • Maintenance free 6 volt sealed lead acid battery. • Operating temperature range is 65˚F (19˚C) to 85˚F (30˚C) and should provide a service life of 5 to 7 years with SLA battery. • Provides a minimum of 90 minutes emergency illumination while in the emergency mode. electronics • Surge protection, low voltage disconnect, brownout protection and constant current charger. • 120/277 VAC selectable input. • Power Consumption: VCH 120V: 14mA Line Amps, 1.68W Input Wattage 277V: 14mA Line Amps, 3.88W Input Wattage remote capacity • Combos have 12W remote capacity. • CCHR matching remote lamp heads are available refer to spec sheet CA-51200. warranty Specifier’s Reference Project • Full 5 year warranty on units. (Lamps not included) Type Model No. Comments Green Product Choice:VCH253RW Catalog Number VCH253RW1 VCH253GW1 Volts 6 6 Letter Color Red Green Housing Color White White Lamp Type MR11 5W MR11 5W Footnotes: 1. Units are shipped as universal (for single face or double face applications). A canopy is provided for ceiling mounting. 2. Refer to Spec Sheet CA-51200 for available matching remote lamp heads. Accessories (Order Separately) CCHCANOPY – Canopy for allowing single face combo to be mounted to ceiling CCHSPWR – Stencil face, white panel with red diffuser. CCHSPWG – Stencil face, white panel with green diffuser. WG4 – Wire Guard (Wall mount only) © 2013 Koninklijke Philips Electronics N.V.  All rights reserved. Specifications are subject to change without notice. CE-14200  03/13  Operation Emergency (Lead Acid Battery) Emergency (Lead Acid Battery) Remote Capacity 12W 12W CE-14200 VCH Series Value+II Thermoplastic Combo dimensions 12-3/4" (323.85mm) 12" (304.8mm) 13-3/4" (349.25mm) 2" (50.8mm) performance Meets Life Safety Code standard minimum illuminance of 0.1 FC and average illuminance of 1.0 FC. Assumes open space with no obstructions, mounting height: 8’, ceiling height: 9’, and reflectances: 80/50/20. Analysis based on independently tested photometrics. VCH253RW VCH253RW 6' 3' 41' Avg fc = 1.03 Min fc = 0.20 Max fc = 2.10 Max/Min fc = 10.50 30' Avg fc = 1.01 Min fc = 0.40 Max fc = 2.90 Max/Min fc = 7.25 © 2013 Koninklijke Philips Electronics N.V.  All rights reserved. Specifications are subject to change without notice. Philips Lighting Company 200 Franklin Square Drive Somerset, NJ  08873 Phone: 855-486-2216 Philips Lighting Company 281 Hillmount Road Markham ON, Canada L6C 2S3 Phone: 800-668-9008 CE-14200  03/13  www.philips.com/luminaires www.philips.com/luminaires