Transcript
I SERIES Point Source 600
IP6-1122/66
MEDIUM POWER 12-INCH TWO-WAY 60° x 60° INSTALLATION LOUDSPEAKER FEATURES • Long excursion ferrite LF driver with FEA-optimized motor and symmetric movement suspension • 3-inch voice coil, 1.4” exit HF driver; hybrid titanium/polyimide diaphragm on low compression phase plug • Lightweight and compact with deep LF extension • Large rotatable waveguide with individually voiced crossover, single amp / biamp selectable • Innovative low profile modular bracket systems create elegant arrays with simplified installation 28.00" (711mm)
TECHNICAL SPECIFICATIONS1 Operating Mode
Passive or Biamp with DSP
Operating Environment
Indoor
Operating Range2
38 Hz to 18.5 kHz
Nominal Beamwidth (H x V)
60° x 60°, rotatable waveguide
Transducers
LF 1 x 12" (305mm) ferrite driver, 2.5" (64mm) voice coil HF 1 x 1.4" (36mm) exit, 3" (76mm) voice coil, hybrid titanium/polyimide diaphragm, ferrite compression driver
Continuous Power Handling3 @ Nominal Impedance
Passive* LF HF
69V 63V 24V
Passive LF HF
@ 1W 95 dB 95 dB 108 dB
@ 2.83V 95 dB 95 dB 108 dB
Passive LF HF
Peak 129 dB 128 dB 133 dB
Continuous 123 dB 122 dB 127 dB
System
@ 1W 93 dB
@ 2.83V 93 dB
System
Peak 127 dB
Continuous 121 dB
Passive LF HF
600W - 1200W @ 8 ohms, (69V - 98V) 500W - 1000W @ 8 ohms, (63V - 89V) 75W - 150W @ 8 ohms (24V - 35V)
APPLICATIONS MAIN PA (Small to Medium Size Venues) Houses of Worship · Auditoriums · Restaurants Meeting Rooms · Theaters · Corporate A/V Systems DISTRIBUTED OR FILL (Larger Size Venues) Arenas · Stadiums · Night Clubs · Theaters Themed Entertainment · Larger Houses of Worship
Nominal Sensitivity4
Nominal Maximum SPL 5 (Whole Space)
DESCRIPTION I SERIES Point Source 600 loudspeakers provide excellent acoustic performance, modular flexibility and elegant aesthetics for modern performance venues. Designed to support the goals of systems integrators and consultants both acoustically and mechanically, I SERIES includes a wide variety of arrayable, rotatable coverage patterns and a comprehensive selection of modular bracket systems that accelerate system design and system commissioning. FEA-optimized ferrite motors, mechanically mirrored suspension and advanced cooling system combine to provide linear performance with minimal power compression. The custom long-excursion LF driver delivers deep bass response and a detailed midrange at maximum SPL levels. The HF driver delivers excellent sound quality from a hybrid diaphragm of deep drawn titanium and resonance-absorbing polyimide, coupled to a patented low compression, low resonance phase plug for very low distortion performance with abundant headroom. The rotatable 13-inch (330mm) HF waveguide provides well-defined coverage and a smooth off-axis response that enhances arrayability. Individually voiced crossovers produce proper beamwidth matching transitions and identical sonic signatures, permitting horn patterns to be mixed throughout an installation. Additionally, user selectable single-amp or biamp operating modes expand application flexibility.
Equalized Sensitivity6
Equalized Maximum SPL7 Recommended Amplifiers
600W @ 8 ohms (2400W peak) 500W @ 8 ohms (2000W peak) 75W @ 8 ohms (300W peak)
PHYSICAL Input Connection
(2) Screw terminal blocks (6-position)
Mounting Points
(15) M10 threaded rigging points
Environmental
IPX4 per IEC 60529 , designed in accordance with MIL-STD-810G
Dimensions/Weight/Finish
Refer to the Technical Drawing
OPTIONS Accessories (Refer to Accessory Guide for complete listing)
Rigging kits include: BFR22: BalancePoint™ Fly Rails; IUB1122: U-Bracket; IVY1122: Vertical Yoke; IAF40/IAF55: Isometric Array Frames; VAB-BFR38: Sub Above Vert Array; HAB-BFR38: Sub/Dual 2-Way Horiz Array; HSB/VSB: Multiple Splay Brackets for Horiz/Vert Arrays with/ without Sub Behind options; DFS: Downfill Splay Kit; DVS-BFR22: Dual Vert Splay Kit with BalancePoint™ Fly Rails; TPK: Tight Pack Kit
Configure-to-Order (CTO)
Custom color
*Rated continuous maximum input voltage at passive loudspeaker input may be higher than for directly connected transducers due to losses in the passive crossover. Voltages applied to the transducer terminals through the passive crossover shall always be the same or lower than the rated continuous voltage for each device.
Community strives to improve its products on a continual basis. Specifications are therefore subject to change without notice.
I SERIES Point Source 600
IP6-1122/66
MEDIUM POWER 12-INCH TWO-WAY 60° x 60° INSTALLATION LOUDSPEAKER
LF_proc Full Range
120
120
110
110
100
100
90
90
80
80
10
HF_proc Half Space
LF
HalfSpace_Proc HF
Horizontal HORIZONTAL OFF-AXISOff-Axis RESPONSE (dB)10
20
100 100
Frequency(Hz) (Hz) Frequency
10000 10000
1000 1000
Amplitude (dB SPL)
Half Space
LF
110
100
100
90
90
80
80
70
70 10
HF
110
110
100
100
100
100
90
90
90
90
80
80
110
80
80 10
20
100 100
Mag [dB] (20°)
110
120
20
100
10000
1000 1000
100
100
Passive
100
10
LF
HF
1
10
20
100 100
Half-space
0°
20
10
100 100
LF
Half Space Mag [dB] (20°)
HF
Frequency (Hz)
110
110
100
100
90
90
80
80
70
70
1000 1000
10000
30
10
20
10
10
0
0
10
Half-space
20
0°
100 100
Horizontal
360
20
100 100
30°
40°
10000 10000
Frequency (Hz)
1000 1000
Mag [dB] (0°) Mag [dB] (30°)
10°
20°
Mag [dB] (10°) Mag [dB] (40°)
30°
40°
10000 10000
1000 1000
Frequency (Hz)
Beamwidth (Degrees)
100
20
20°
BEAMWIDTH (Degrees)12
Directivity Index
30
10°
Mag [dB] (10°) Mag [dB] (40°)
(down) (dB)10 VERTICAL OFF-AXIS Off-Axis DOWNVertical RESPONSE Passive
DIRECTIVITY INDEX (dB)11 40
Mag [dB] (30°)
1000 1000 Frequency (Hz)
Minimum Impedance: (Passive) 6.5 ohms @ 250 Hz, (LF) 7.8 ohms @ 280 Hz, (HF) 7.9 ohms @ 4500 Hz
40
10000 10000
70
70
10000
10
1
Mag [dB] (10°)
30°Mag [dB] (40°) 40°
1000 1000 Frequency (Hz) Frequency (Hz)
Frequency(Hz) (Hz) Frequency
IMPEDANCE (Ohms) Impedance IP6‐1122/66
Mag [dB] (0°) Mag 10°[dB] (30°) 20°
Space Mag [dB] (0°) (dB)10 VERTICALHalfOFF-AXIS UP RESPONSE
Sys / Component Axial Sensitivity (dB SPL)
Passive
110
0°
Off-Axis Vertical (up)
AXIAL SENSITIVITY (dB SPL)9 120
Half Mag Half-space [dB] (20°)
System_Proc
Amplitude (dB SPL)
Amplitude (dB SPL)
8 AXIALFrequency PROCESSED (dB)(Axially ResponseRESPONSE Component/System Processed)
10000
10000
BeamH
Vertical
BeamV
100
10
10 10
20
100
100
1000
Frequency (Hz)
1000
10000 10000
I SERIES Point Source 600
IP6-1122/66
MEDIUM POWER 12-INCH TWO-WAY 60° x 60° INSTALLATION LOUDSPEAKER
HORIZONTAL POLAR DATA (30dB Scale, 6dB per major division) 90° left
90° left 135°
-6
45°
— 100 Hz — 125 Hz — 160 Hz — 200 Hz 0° front
180° back
-135°
135°
0° front
180° back
-135°
-45°
90° left 45°
135°
45°
0° front
-135°
135°
45°
-135°
-45°
— 10000 Hz — 12500 Hz — 16000 Hz
0° front
180° back
-90° right
-90° right
-45°
90° left
— 4000 Hz — 5000 Hz — 6300 Hz — 8000 Hz
0° front
-135°
— 630 Hz — 800 Hz — 1000 Hz — 1250 Hz
-90° right
180° back
-45°
45°
180° back
-45°
90° left
— 1600 Hz — 2000 Hz — 2500 Hz — 3150 Hz
0° front
180° back
-135°
135°
-90° right
-90° right
135°
45°
90° left
— 250 Hz — 315 Hz — 400 Hz — 500 Hz
-45° -90° right
VERTICAL POLAR DATA (30dB Scale, 6dB per major division) 90° up
90° up 135°
-6
45°
— 100 Hz — 125 Hz — 160 Hz — 200 Hz 0° front
180° back
-135°
135°
0° front
180° back
-135°
-45°
90° up 45°
-45° -90° down
135°
0° front
-135°
-45°
-45°
90° up
— 4000 Hz — 5000 Hz — 6300 Hz — 8000 Hz
0° front
180° back
-90° down
— 630 Hz — 800 Hz — 1000 Hz — 1250 Hz
-90° down
45°
-135°
45°
180° back
-45°
90° up
— 1600 Hz — 2000 Hz — 2500 Hz — 3150 Hz
0° front
180° back
-135°
135°
-90° down
-90° down
135°
45°
90° up
— 250 Hz — 315 Hz — 400 Hz — 500 Hz
135°
45°
— 10000 Hz — 12500 Hz — 16000 Hz
0° front
180° back
-135°
-45° -90° down
A
B
C
30°
14.50" [368.3]
7
6
1. SYMBOL INDICATES COG. 2. SYMBOL INDICATES MOUNTING POINT, M10 THREADED HOLE. 3. DRAWING REPRESENTATIVE OF IP6-1122/64, IP6-1122/66, IP6-1122/94, IP6-1122/96, IP6-1122/99, IP6-1122/26. 4. WEIGHT: LOUDSPEAKER ONLY: 64LBS. (29.0KG)
NOTES:
FRONT
GRILLE PARTIALLY SHOWN
28.00" [711.2]
14.38" [365.3]
6
5
TOP/BOTTOM
1.38" [35.0]
4
TSC
REV
4
REVISIONS
DESCRIPTION
1.38" [35.0]
9.58" [243.4]
9.50" [241.3] NOT TO SCALE
CL
9.61" [244.0] 1.39" [35.2] 5.83" [148.1]
INPUT
7.06" [179.2]
13.98" [355.1]
4.71" [119.6]
25.25" [641.2]
1.38" [35.0]
8.13" [206.4]
17.70" [449.6]
SIDES
5
DATE
TSC = THEORETICAL SHARP CORNER
DIMENSIONS ACROSS CENTERLINES TO BE SYMMETRICAL
TOLERANCES ON ALL DIMENSIONS UNLESS OTHERWISE NOTED TO BE: ANGLES: ±.5° DECIMALS: ±.03" METRIC: ±0.5mm
3
DO NOT SCALE DRAWING
THIRD ANGLE PROJECTION
2
NONE
IP6-1122-2D
I SERIES IP6-1122
SHEET
1 OF 1
0
REV
www.communitypro.com
COMMUNITY PROFESSIONAL LOUDSPEAKERS 333 E FIFTH ST. CHESTER, PA 19013-4511 USA TEL: (610)876-3400 FAX: (610)874-0190
1
2
1
THIS DRAWING HAS BEEN FURNISHED BY COMMUNITY LIGHT & SOUND, INC. THE INFORMATION AND KNOW-HOW THEREON MAY NOT BE USED NOR THE DRAWING REPRODUCED WITHOUT THE WRITTEN PERMISSION OF COMMUNITY. ALL REPRODUCTIONS WHOLE OR IN PART, INCLUDING VENDOR'S SHOP DRAWINGS SHALL BEAR OR REFER TO THIS STAMP.
SCALE
DWG NO.
DRAWING TITLE
1.38" [35.0]
25.25" [641.2]
4.26" [108.1]
3
ALL DIMENSIONS IN in/mm U.O.S.
BACK
CL
Enclosure / Finish Black (RAL#9004) or White (RAL#9003) low gloss, uniformly textured painted 15mm Baltic Birch plywood
Grille: Powder-coated perforated steel backed with colormatched acoustically transparent woven fabric. Black (RAL#9005) or White (RAL#9003)
A
B
C
D
E
IP6-1122/66
D
E
7
Shipping Weight 74 lbs (33.6 kg)
Unit Weight 65.0 lbs (29.5 kg) loudspeaker only
HxWxD 28.00" x 14.50" x 17.70" (711 x 368 x 450 mm)
TECHNICAL DRAWING / DIMENSIONS / FINISH
I SERIES Point Source 600 MEDIUM POWER 12-INCH TWO-WAY 60° x 60° INSTALLATION LOUDSPEAKER
I SERIES Point Source 600
IP6-1122/66
MEDIUM POWER 12-INCH TWO-WAY 60° x 60° INSTALLATION LOUDSPEAKER CONNECTION DIAGRAMS
+/– DSP
Passive Input
Amp
Crossover
HF
+/– Passive Thru
LF
Two-way single amp
+/–
HF Amp
HF Input
DSP
HF
+/–
LF Amp
LF Input
LF
Two-way biamp
Two-way input panel
NOTES 1. PERFORMANCE SPECIFICATIONS All measurements are taken indoor using a time-windowed and processed signal to eliminate room effects, approximating an anechoic environment, a distance of 6.0 m. All acoustic specifications are rounded to the nearest whole number. An external DSP with settings provided by Community Professional Loudspeakers is required to achieve the specified performance; further performance gains can be realized using Community’s dSPEC226 loudspeaker processor with FIR power response optimization. 2. OPERATING RANGE The frequency range in which the on-axis processed response remains within 10dB of the average SPL. 3. CONTINUOUS POWER HANDLING Maximum continuous input voltage (and the equivalent power rating, in watts, at the stated nominal impedance) that the system can withstand, without damage, for a period of 2 hours using an EIA-426-B defined spectrum; with recommended signal processing and protection filters. 4. NOMINAL SENSITIVITY Averaged SPL over the operating range with an input voltage that would produce 1 Watt at the nominal impedance and the averaged SPL over the operating range with a fixed input voltage of 2.83V, respectively; swept sine wave axial measurements with no external processing applied in whole space, except where indicated.
Community Professional Loudspeakers 333 East Fifth Street, Chester, PA 19013-4511 USA Phone (610) 876-3400 • Fax (610) 874-0190 communitypro.com •
[email protected]
5. NOMINAL MAXIMUM SPL Calculated based on nominal / peak power handling, respectively, and nominal sensitivity; exclusive of power compression. 6. EQUALIZED SENSITIVITY The respective SPL levels produced when an EIA-426-B signal is applied to the equalized loudspeaker system at a level which produces a total power of 1 Watt , in sum, to the loudspeaker subsections and also at a level which produces a total voltage, in sum, of 2.83V to the loudspeaker subsections, respectively; each referenced to a distance of 1 meter. 7. EQUALIZED MAXIMUM SPL The SPL produced when an EIA-426-B signal is applied to the equalized loudspeaker system, at a level which drives at least one subsection to its rated continuous input voltage limit, referenced to a distance of 1 meter. The peak SPL represents the 2:1 (6dB) crest factor of the EIA-426-B test signal. 8. AXIAL PROCESSED RESPONSE The on-axis variation in acoustic output level with frequency of the complete loudspeaker system with recommended signal processing applied. 1/6 octave Gaussian smoothing applied. 9. AXIAL SENSITIVITY The on-axis variation in acoustic output level with frequency for a 1 Watt swept sine wave, referenced to 1 meter with no signal processing. 1/6 octave Gaussian smoothing applied.
10. HORIZONTAL / VERTICAL OFF-AXIS RESPONSES The loudspeaker’s magnitude response at various angles off-axis, with recommended signal processing applied in the operating mode which utilizes the largest number of individually amplified pass bands. 1/6 octave Gaussian smoothing applied. 11. DIRECTIVITY INDEX The ratio of the on-axis SPL squared to the mean squared SPL at the same distance for all points within the measurement sphere for each given frequency; expressed in dB. 1/6 octave Gaussian smoothing applied. 12. BEAMWIDTH The angle between the -6dB points in the polar response of the loudspeaker when driven in the operating mode which utilizes the largest number of individually amplified pass bands. 1/6 octave Gaussian smoothing applied. Data presented on this spec sheet represents a selection of the basic performance specifications for the model. These specifications are intended to allow the user to perform a fair, straightforward evaluation and comparison with other loudspeaker spec sheets. For a detailed analysis of this loudspeaker’s performance, please download the GLL file and/or the CLF file from our website: communitypro.com.
CAUTION: Installation of loudspeakers should only be performed by trained and qualified personnel. It is strongly recommended that a licensed and certified professional structural engineer approve the mounting design. IP6-1122/66 [17FEB2015]
