Compact Gige Vision Camera With Very High Resolution.

Transcript

Genie™ NanoXL-M4090 Area Scan Monochrome Cameras Overview Compact GigE Vision camera with very high resolution. The Genie NanoXL-M4090 offers both the On-Semi Python 16K Monochrome version sensor with a resolution of 4096 x 4096. Teledyne DALSA’s “Burst Acquisition” and “Turbo Drive” feature allows for image capture rates of 30 fps in 16 M pixels resolution while maintaining very good image quality. The Genie NanoXL-M4090 takes advantage of gigabit Ethernet technology, transmitting data over standard CAT-5e and CAT-6 cables to distances of up to 100 m. Like all Teledyne DALSA GigE cameras, the Genie NanoXL-M4090 is based on AIA (Automated Imaging Association) GigE Vision Standard to directly link the camera to a PC. Key Features Specifications • Uses standard PC Ethernet Active Resolution Acquisition Frame Rate Data Output Transfer Pixel Size Data Format Exposure Control Dynamic Range Gain Control I/O Ports Image Buffer Lens Mount Size (L x H x W) Mass Operating Temp Power Supply Power Dissipation Data Connector Power and I/O Connector Camera Specification Software Platform Part Number port & hardware • Supports cable lengths up to 100 m (CAT-5e or CAT-6) • Simplified set-up with field proven Sapera Essential software featuring CamExpert • Engineered to accommodate industrial environment with a Ruggedize, screw mount, RJ-45 connector Programmability • Higher frame rates achievable in partial scan mode • Global electronic shutter with exposure Control • Multi-Exposure Feature • Multi-ROI Feature Typical Applications • Electronics manufacturing inspection • Industrial metrology • Intelligent traffic systems Regulatory Compliance • CE, FCC and RoHS W W W. S T E M M E R- I M A G I N G . C O M 4096 x 4096 30 fps (internal BurstMode) Gigabit Ethernet (1000 Mbit/s) only 4.5 μm x 4.5 μm 8 Bits output Automatic, Programmable, or via External Trigger 55.2 dB Automatic, Manual up to 3.17x analog gain 2 opto-isolated input, 3 opto-isolated output 500 MB of On-board memory M42 mount 30 mm x 59 mm x 59 mm (without lens adapter or connectors) ~163g -20 to +60c (Housing temperature) 10 to 36V or Power Over Ethernet (POE) 6.5 Watt @ 24Volt Aux. Standard or Screw mount RJ-45 SAMTEC TFM-105 type GigE Vision v1.2 Compliant Teledyne DALSA Sapera LT 8.0 or 3rd Party Genicam Compliant SDK G3-GM30-M4095 (Standard Response Model) Genie™ NanoXL-M4090 Area Scan Monochrome Cameras All Genie cameras feature value added functionality designed specifically for imaging and machine vision applications. All features are easily accessible with Teledyne DALSA’s advanced software tools. These tools deliver superior image capture, performance, and control. 2 1 NOT RELEASED FOR REVIEW ONLY 12 ± 0.6 OPTICAL DISTANCE (47) M3x0.5 - 6H  4.5 (2X) (26) B (6.5) CENTER OF IMAGE AREA B (26) M42x1 - 6H C B M3x0.5 - 6H  6 (4X) (9.33) M3x0.5 - 6H  6 (2X) THIS SIDE (2X) FAR SIDE A M3x0.5 - 6H  6 (3X) THIS SIDE (2X) FAR SIDE (23.7) (7) (26) (13.97) (38.28) 29.5 0.15 (20) (16.8) 29.5 0.15 (47) (14.75) ±0.2° 59 0.05 (7) K-TEDA106-11/2016 ∙ Subject to technical change without notice. No liability is accepted for errors which may be contained in this document. 59 0.05 A A NOTES: 1. UNITS: MILLIMETERS. 2. IMAGE AREA IS ALIGNED TO DATUMS A B & C . www.teledynedalsa.com THIRD ANGLE PROJECTION 605 McMurray Road Waterloo, ON CANADA, N2V 2E9 Phone: (519) 886-6000 Fax: (519) 886-8023 www.teledynedalsa.com Americas TITLE Europe G3-GM30-M5105 CUSTOMER DRAWING Boston, USA Krailling, Germany 2 +1 978-670-2000 +49 89-89-54-57-3-80 [email protected] [email protected] DWG NO. 03-129-20194 APPLICATION/PROJECT 00D DATE SCALE NTS SEP 27/2016 VALID WHEN PRINTED ON A SIZE PAPER SIZE Asia Pacific A SHEET 1 OF 1 Shanghai, China Tokyo, GENIE Japan NANO XL 1 +86 21-3368-0027 +81 3-5960-6353 [email protected] [email protected] Teledyne DALSA has its corporate offices in Waterloo, Canada Teledyne DALSA reserves the right to make changes at any time without notice. Teledyne DALSA © 2016. Imaging is our passion. www.stemmer-imaging.com REV STEMMER IMAGI NG Head Office Gutenbergstraße 9 - 13, D-82178 Puchheim Phone: +49 89 80902-0, [email protected]