Transcript
Compact, Uncompromising Sound and Features
Impressive mixing capacity in a small package
Compact Size: 749 (W) × 626 (D) × 229 (H) mm Light Weight: 9.8kg
The M-300 V-Mixer is the ultimate solution for a variety of venues and applications. It provides a substantial mixing capacity of 32 mixing channels, 8 aux buses, 4 matrices, which represent the highest level in its class. The M-300 V-Mixer seamlessly integrates with other RE AC devices. The user can dire ctly ope rate the D igital Sna ke preamp, control an M-48 Personal Mixer, and set up the I/O for the S-4000M REAC Merge Unit. All of these features are contained in a very compact size of 749mm width x 626mm depth x 229mm height, and at a weight of 9.8kg (21 lbs 10 oz). The M-300 is the perfect choice for any venue with a limited set-up area, as well as for mobile sound reinforcement. Optional rack rails are also available.
Powerful Built-in Channel Effects Equalization of channels and dynamics are the foundation of any great mix. The enhanced sound shaping abilities of the M-300 input channels include 4-band fully parametric EQ as well as gate and compression. A Key-In filter can be used for the Gate/Compressor to enable more expressive mixing. The 4 multi-effects processors can be set to use any of 11 different effects types. In addition to Reverb and Delay, modulation effects such as Chorus and Phaser are also available. The M-300’s busses are also equipped with 8 bands of fully Parametric EQ and Signal Delay on each Aux, Matrix and Main output. The M-300 is fully equipped with all of the sound adjustment tools built-in and ready to go.
Built-in 2 REAC ports allows flexible system configuration
A
B
4xXLR 4xTRS 4xRCA
40ch 40ch
40ch 40ch
32 Mixing Ch L/C/R Outputs 8 AUX 4 Matrix
4xXLR 4xTRS 2xDigital Phones
Advanced Control Surface Design The M-380 and M-400 V-Mixers are highly regarded for their ease of use and the M-300 continues this tradition starting with 17 x 100mm motorized faders. Central to the M-300’s operation is a high-resolution 800x480 pixel color display. Channel Parameters such as Gain, Pan, EQ and Dynamics can be comfortably operated from the Channel Edit section located on the left side of the display. All parameters can be instantly saved and recalled from Scene Memory. The layers of faders can be easily switched with the LAYER button. Faders can be accessed and arranged freely, and saved as a User Layer.
Cutting Edge Features
Record the output of the M-300 Main, assigned AU X b u s o r M AT R I X b u s d i re c tl y to a U S B memory drive connected to the built-in USB port. A mix produced with the M-300 can be saved as an uncompressed WAV file, without the need for an ex ternal recorder. WAV files on the USB memory drive can also be played back on the M-300 and used for background music/tracks. User settings and mixer data can also be saved to a USB memory drive.
The M-300 interfaces with a variety of devices
Control remotely from a PC The M-300 can be controlled remotely in real-time from a PC (Windows) connected via the USB port. Mixing functions on the M-300 can be operated directly from a PC by using the M-300RCS dedicated control software which has the same GUI as the M-300 color display. (The M-300RCS can be downloaded from the Roland Systems Group website.) The M-300RCS can also be operated i n of f l i n e m o d e, a ll ow i ng d ata fo r va r i o u s settings to be created in advance and saved to a USB memor y drive. When you get to the venue, load the settings and jump right into sound check and rehearsal.
6
USB memory recorder/player
Control remotely using a wireless LAN By enabling Remote Desktop Connection on a local PC directly connected to the M-300 via the USB, the M-300 can be controlled remotely from another PC using a wireless L AN. A tablet PC can be used to control the M-300 from a remote location. For example, you can be seated in the audience to adjust the house mix during the rehearsal, or stand onstage to adjust the monitor mix while consulting the stage performer. The M-300 enables new mixing possibilities that you could never achieve with an analog console.
Multi-channel recording to a DAW For ty channels of 24-bit audio can be recorded directly to a PC ( Windows) by connecting a REAC port to the gigabit Ethernet port on the PC via a single Cat5e cable. Audio is recorded as individual WAV files using Cakewalk SONAR and can be m i xe d af te r re c o rd i n g u s i n g th e p owe r f u l dig i ta l au dio to o ls a n d effects in SONAR.
V-LINK - Audio and Visual Solution By connecting the MIDI input/output to the video switcher such as the V-1600HD, V-LINK automatically synchronizes the audio of the M-300 with the visual images allowing “audio follows video”.
* To use this feature, the REAC driver is required in addition to SONAR.
7
10 20 430 20 A/D
MAX 40 INPUTS
HI-Z ON/OFF
(7/8 ONLY)
GAIN
PHANTOM
PHANTOM
SIG
PEAK
8 INPUTS
GAIN
A/D
8 INPUTS
SIG
PEAK
1
A/D
CONSOLE INPUT 9–12
TO OUTPUT PATCHBAY
A/D
CONSOLE INPUT 5–8
MAIN C EXT FX INSERT OUT
MAIN R EXT FX INSERT OUT
MAIN L EXT FX INSERT OUT
MTX 1 EXT FX INSERT OUT
AUX 8 EXT FX INSERT OUT
AUX 1 EXT FX INSERT OUT
CH 32 EXT FX INSERT OUT
CH 1 EXT FX INSERT OUT
AUX 8 OUT
AUX 1 OUT
MAIN C FX INSERT OUT
MAIN R FX INSERT OUT
MAIN L FX INSERT OUT
MTX 4 FX INSERT OUT
MTX 1 FX INSERT OUT
AUX 8 FX INSERT OUT
AUX 1 FX INSERT OUT
CH 32 FX INSERT OUT
CH 1 FX INSERT OUT
A/D
TO EXTERNAL FX
EXTERNAL FX
EFFECTS
LEVEL
OSC FREQ
CONSOLE INPUT 1 CONSOLE INPUT 2 CONSOLE INPUT 3 CONSOLE INPUT 4
TALKBACK / OSCILLATOR
MIC SELECT
KEY-IN
KEY-IN SOLO
KEY-IN SOLO
EXT INSERT OUT
FX INPUT SELECT
COMP
CONSOLE INPUT 1–4
40
REAC B INPUT
KEY-IN FILTER
KEY-IN
GATE/ EXP
MTX 4 EXT FX INSERT OUT
PHANTOM
USB PLAYER L / R
FX 4 OUT L / R
FX 3 OUT L / R
FX 2 OUT L / R
GAIN
MAX 40 INPUTS
HI-Z ON/OFF
(7/8 ONLY)
A/D
A/D
FX 1 OUT L / R
GAIN
A/D
A/D
SIG
PEAK
16 INPUTS
MAX 40 INPUTS
SRC
GAIN
GAIN
GAIN
- SELF POST GATE - CH 1-32 DIRECT OUT - REAC A IN1–40 - REAC B IN1–40 - CONSOLE IN1–12
KEY-IN FILTER
HPF
+48V
S-4000M
+48V
PHANTOM
INPUT 5–8
+48V
INPUT 1–4
S-0808
SI-AES4 AES/EBU
+48V
PHANTOM
SI-AD4
S-4000S
+48V
PHANTOM
INPUT1–8
S-0816
+48V
INPUT1–16
S-1608
From FOH (M-300, M-380 or M-400)
S-4000M
PHANTOM
A/D
8 INPUTS
PHASE ATT - SELF POST HPF - CH 1-32 DIRECT OUT - REAC A IN1–40 - REAC B IN1–40 - CONSOLE IN1–12
SEND LEVEL
SEND LEVEL
CONSOLE INPUT 5-8
INPUT
MUTE
MUTE
FX 3
EXT FX 1-4
CENTER
MAIN ON
RETURN RETURN LEVEL
EXT INSERT IN
FX OUTPUT SELECT
ON
ON
PAN
AUX/MTX LINK
TO 2, 4...8
TO 1, 3...7
MAIN L SOLO MAIN R SOLO MAIN C SOLO AUX 1-8 SOLO MTX 1-4 SOLO
MTX SEND (FROM MAIN L, C, R) MTX SEND (FROM AUX 1-8)
MAIN SEND (FROM AUX 1-8)
To MAIN C EXT FX INSERT IN
To MAIN R EXT FX INSERT IN
To MAIN L EXT FX INSERT IN
To MTX 4 EXT FX INSERT IN
To MTX 1 EXT FX INSERT IN
To AUX 8 EXT FX INSERT IN
To AUX 1 EXT FX INSERT IN
To CH 32 EXT FX INSERT IN
To CH 1 EXT FX INSERT IN
To INPUT PATCHBAY
To MAIN C FX INSERT IN
To MAIN R FX INSERT IN
To MAIN L FX INSERT IN
To MTX 4 FX INSERT IN
To MTX 1 FX INSERT IN
To AUX 8 FX INSERT IN
To AUX 1 FX INSERT IN
To CH 32 FX INSERT IN
To CH 1 FX INSERT IN
TO OUTPUT PATCHBAY
KEY-IN SOLO
TO OUTPUT PATCHBAY
TALKBACK / OSC OUT
SOLO
DIRECT OUT POINT
SEND
SEND
AFL ON
OSC ON
PFL(R) AFL(R)
PFL(L) AFL(L)
PRE PHASE PRE EQ PRE FADER POST FADER
PRE EQ PRE FADER POST FADER
PRE EQ PRE FADER POST FADER
AUX SEND 1–8, MTX SEND 1–4
TO CONSOLE OUTPUT 5-8
Same as the above
FX 4
Same as the above
OUTPUT
PAN (LCR)
LEVEL
TALKBACK ON
Same as the above
FX 2
EFFECT
FX 1
LEVEL
TALKBACK / OSC
OSC ON
TO SOLO
TO SOLO
PAN
* Sampling frequency is 48 kHz or 44.1 kHz.
+48V
INPUT 5–8
GAIN
RA-10U
PHANTOM
Rackmountable to 19-inch rack (EIA)
+48V
Rackmount Angle
INPUT 1–4
194.9
S-0808
470
1
Unit: mm
40
OPTION
SRC
V-Mixer M-300 Dimensions
SI-AES4 AES/EBU
CONSOLE INPUT jacks (1 to 4): -80dB (Pad: ON, Input sens: +4 dBu, typ.) CONSOLE INPUT jacks (5 to 12): -80dB (Input sens: +4 dBu, typ.) CONSOLE OUTPUT jacks (1 to 8): -100 dB (typ.) LCR
CONSOLE OUTPUT jacks (1 to 8): 105 dB (typ.) (0dBu=0.775Vrms)
LR ON
Dynamic Range * XLR type: 1 GND, 2 HOT, 3: COLD * phantom power: DC+48V(unloaded maximum), 14mA(maximum load) (All XLR type inputs) * When a REAC Splitter S-4000D or a switching hub is used in-line with REAC cables, the network latency will increase by the amount of processing delay introduced by the splitting device itself. The actual delay is dependant upon the specifications of the splitting device, though the maximum delay amount for a single splitting device should be about 200microseconds.
MUTE FADER
CONSOLE OUTPUT jacks (1 to 8): 0.05 % (typ., +4 dBu) PHONES jack: 0.05 % (typ., 40 ohms load, 130 mW)
4-BAND PEQ
Total Harmonic Distortion + Noise
MAIN
AUX
MTX SOLO
LRC 1 2 3 4 5 6 7 8 1 2 3 4 LR
PRE EQ
PRE EQ
AUX 8 OUT
REC OUT LR
MTX 4 OUT
MTX 1 OUT
MONO OUT
MAIN OUT C MAIN OUT LCR
MAIN OUT LR
AUX 1 OUT
MONITOR
MONITOR SELECT
SOLO LEVEL
AUX 8 OUT
AUX 1 OUT
FADER
SOLO LOGIC
MTX 4 OUT
MTX 1 OUT
MONO OUT
PRE EQ
PFL AFL
LIMITER
GR
DELAY
DELAY
REC LEVEL
MUTE LIMITER
GR
PFL AFL
SOLO
MAIN ON
LR ON
C ON
SEND ON
AFL ON
MONITOR
MTX LINK
POST DELAY
TO SOLO
TO MAIN R
TO MAIN C
TO MAIN L
TO MTX 2, 4
TO MTX 1, 3
POST DELAY
TO SOLO
TO MTX 2, 4
TO MTX 1, 3
POST DELAY
REC OUT L,R
MTX 1–4 OUT
AUX 1–8 OUT
MONO OUT
MONO MIX
MAIN OUT C
MAIN OUT R
USB PLAYER L/R
TALKBACK / OSC
DIRECT OUT 1-32
MONITOR OUT R
EXTERNAL FX OUT
D/A
D/A
D/A
PHONES LEVEL
40
1
REAC B OUT
40
MONITOR OUT L
L R C
1 40
REAC A OUT 1
40
1
OUTPUT PATCHBAY
MAIN OUT L
CONSOLE INPUT 1–12
TO MONITOR SEL
TO INPUT PATCHBAY
TO SOLO
DELAY
LCR
PAN
DELAY
PAN
MTX LINK
DELAY
PLAY LEVEL
SOLO
TO MONITOR SEL TO REC SEL
USB MEMORY RECORDER
MONITOR LEVEL
SOLO
SEND ON
CENTER AFL ON
USB MEMORY
PFL AFL
PAN
PAN (LCR)
MAIN SEND
POST FADER
PRE FADER
PRE EQ
MTX SEND 1–4
POST LIMITER
REC LEVEL
AFL ON
SEND ON
SEND ON
TO MONITOR SEL TO REC SEL TO FX SOURCE SEL
POST FADER
PRE FADER
MTX SEND 1–4
POST FADER POST LIMITER
LIMITER
GR
POST FADER
MUTE
MUTE
REC SELECT
BAL
PRE FADER
FADER BAL
PRE FADER
FADER BAL
MAIN OUT L MAIN OUT R MAIN OUT C MAIN OUT L+C MAIN OUT R+C
8-BAND PEQ
8-BAND PEQ
USB MEMORY RECORDER
ATT
EXT FX FX INSERT INSERT
POST ATT
MTX 1–4
ATT
EXT FX FX INSERT INSERT
POST ATT
AUX 1–8
ATT
EXT FX FX INSERT INSERT
POST ATT
TO MONITOR SEL TO REC SEL TO MONO MIX
9.8 kg 21 lbs 10 oz
8-BAND PEQ
Weight
EXT FX FX INSERT INSERT
CONSOLE OUTPUT jacks (1 to 8): -2 dB / +0 dB (20k ohms load, +4 dBu) PHONES jack: -3 dB / +0 dB (40 ohms load, 150 mW)
REAC A INPUT
C ON
470.0 (W) x 482.7 (D) x 194.9 (H) mm 18-1/2(W) x 19(D) x 7-1/4(H) inches
A/D
POST FADER
Dimensions
PRE FADER
50 W
PRE EQ
Other Connectors Power Consumption
GR
AC 115 V, 117 V, 220 V, 230 V, 240 V (50/60 Hz)
Grounding terminal AC INPUT connector
POST GATE POST COMP
800 x 480 dots Wide VGA TFT color screen with backlight
GR
Display
Power Supply
POST HPF
Remote Connectors
POST ATT
OTHERS
RS-232C connector: 9-pin D-sub type MIDI connectors (OUT/THRU, IN): 5-pin DIN type
PREAMP
Type A x 1, Type B x 1
SIG
USB port
PEAK
-126 dBu (Main Fader: Unity, Channel faders: Unity only one channel, Preamp gain: Max)
MAX 40 INPUTS
Equivalent Input Noise Level (E.I.N.)
GAIN
RJ-45 EtherCon type x 2
PHANTOM
REAC port
+48V
Optical type
SI-AD4
-88 dBu (All faders: Min)
DIGITAL OUT jack
S-4000S
Residual Noise Level (IHF-A, typ.)
POST LIMITER
Stereo 1/4 inch phone type POST FADER
PHONES jack
PRE FADER
1/4 inch Phone type (balanced)
PRE EQ
CONSOLE OUTPUT jacks (5 to 8) CONSOLE OUTPUT jacks (1 to 8): +22 dBu (1 kHz, 10 k ohms load) PHONES jack: 150 mW + 150 mW (Typ., 1 kHz, 40 ohms load)
CH 1–32
Non Clip Maximum Output level
MAIN L, R, C
XLR-3-32 type (balanced)
INPUT PATCHBAY
CONSOLE OUTPUT jacks (1 to 4)
SIG
CONSOLE OUTPUT jacks (1 to 8): 10 k ohms or greater PHONES jack: 8 ohms or greater
PEAK
Recommended Load Impedance
A/D
RCA Pin type
GAIN
CONSOLE INPUT jacks (9 to 12)
PHANTOM
CONSOLE OUTPUT jacks (1 to 8): 600 ohms PHONES jack: 100 ohms
+48V
Output Impedance
8 INPUTS
1/4 inch Phone type (balanced) REAC A INPUT REAC B INPUT
CONSOLE INPUT jacks (5 to 8)
MTX SOLO
CONSOLE OUTPUT jacks (1 to 8): +4 dBu (Load impedance: 10 k ohms)
AUX
Nominal Output Level
LR C 1 2 3 4 5 6 7 8 1 2 3 4 LR
XLR-3-31 type (balanced, phantom power)
MAIN
CONSOLE INPUT jacks (1 to 4)
TO OUTPUT PATCHBAY
Frequency Response CONSOLE INPUT jacks (1 to 4): +8 dBu (Pad: OFF) or +28 dBu (Pad: ON) CONSOLE INPUT jacks (5 to 12): +22 dBu
SIG
INPUT/OUTPUT CHARACTERUSTUCS Non Clip Maximum Input level
PEAK
CONNECTORS CONSOLE INPUT jacks (1 to 4): 14 k ohms CONSOLE INPUT jacks (5 to 12): 10 k ohms
INPUT1–8
A/D
* Total System Latency of audio signal from S-1608 inputs to outputs via M-300's REAC ports (A or B). * Sample Rate: 48.0 kHz * Effects : No insert effects
Input Impedance
16 INPUTS
Crosstalk@ 1 kHz 2.8 mS (typ.) *1
S-0816
GAIN
24-bit/48.0 kHz or 44.1 kHz CONSOLE INPUT jacks (1 to 4): -65 to -10 dBu (Pad: OFF) or -45 to +10 dBu(Pad: ON) CONSOLE INPUT jacks (5 to 12): -28 to +4 dBu
PHANTOM
AD/DA Conversion Nominal Input Level (Variable)
+48V
32 mixing channels/11 buses/4 MATRIX buses/Up to 92 inputs and 90 outputs when using REAC Devices
INPUT1–16
Number of Channels
S-1608
PROCESSING
M-300 Mixer Block Diagram
Network Latency
482.7
475.7
V-Mixer M-300 SPECIFICATIONS 40 INPUTS
OPTICAL
PHONES OUT
CONSOLE OUTPUT 5–8
CONSOLE OUTPUT 1–4
DIGITAL OUT
(M-300, M-380 or M-400)
To Monitor/Broadcast Console
MAX 40 OUTPUTS
To M-48
8 OUTPUTS
MAX 40 OUTPUTS
16 OUTPUTS
8 OUTPUTS
S-4000M
D/A
OUTPUT 1–8
S-0808
SRC
AES/EBU
SO-AES4
D/A
SO-DA4
S-4000S
D/A
OUTPUT 1–16
S-0816
D/A
OUTPUT 1–8
S-1608
(M-300, M-380 or M-400)
MAX 40 OUTPUTS
8 OUTPUTS
MAX 40 OUTPUTS
16 OUTPUTS
8 OUTPUTS
To Monitor/Broadcast Console
S-4000M
D/A
OUTPUT 1–8
S-0808
SRC
AES/EBU
SO-AES4
D/A
SO-DA4
S-4000S
D/A
OUTPUT 1–16
S-0816
D/A
OUTPUT 1–8
S-1608
