Transcript
CompactPCI ® Serial Interposer for PCI Express® 2.0
99 mm (3.9”)
CompactPCI Serial Interposer Provides Quick, Simple Setup! Specifications Dimensions
99* mm x 302 mm (3.9” x 11.9”) *132 mm (5.2”) with retention bracket
Lane Width
x1, x4 or x8
Data Rates
2.5 GT/s (Gen1) and 5 GT/s (Gen2)
Ordering Information Product Description
Product Code
G2x8 CompactPCI Serial Interposer
PE061UIA-X
iPass Y-cable ,1 meter
PE010UCA-X
System Compatibility Summit T3-16 Summit T3-8 Summit T34 Summit T28 Summit T24
Teledyne LeCroy’s CompactPCI Serial Interposer provides a dedicated probe that makes it easier to analyze in-band PCI Express data traffic between a CompactPCI Serial card and its system. The interposer assures reliable data transmission while providing 100% capture of all PCIe® data traffic flowing through the CompactPCI Serial interface. Connecting the interposer to a Teledyne LeCroy analyzer allows decoding and display of data flowing in both directions and across all lanes, and will display data traffic using the industry-standard CATC Trace™ data display, along with a wide range of traffic and error reports. The Gen2 CompactPCI Serial Interposer supports data rates of 2.5 GT/s (Gen1) and 5.0 GT/s (Gen2), and lane widths up to x8. The CompactPCI Serial specification, also known as PICMG CPCI-S.0, is a next generation CompactPCI system that offers support for switched fabrics such as PCI Express over a new high speed rugged connector. It incorporates a star architecture made up of serial point-to-point connections where one system slot can control up to eight peripheral slots. Mobile and stationary applications in real-time control and monitoring, data acquisition and instrumentation, and simulation and test are the primary focus for this technology. Target applications include robotics, machine control and industrial automation via research, computer telephony and telecommunication, medical engineering and energy sector, to ground transportation, avionics and shipbuilding and any type of mobile machine or vehicle. The new Gen2 CompactPCI Serial Interposer is a powerful and versatile tool for all developers working with CompactPCI Serial expansion cards.
CompactPCI Serial Interposer Interconnection Overview SW2: Clock Selection DIP Switches
SW1: Link Width Presence Detect
Summit T28 (or other analyzer)
iPass Y-Cable PE010UCA-X
US_CLK
DS_CLK
1
2
3
4
5
Slot_CLK
Slot_CLK
ON
ON
ON
ON
ON
J20
J20
OFF
ON
OFF
ON
ON
J16
ON
OFF
ON
OFF
ON
J16
OFF
ON
ON
OFF
ON
J16
ON
ON
ON
OFF
ON
J20
ON
ON
OFF
ON
ON
Presence Detect PRSNT 1
ON
ON
ON
PRSNT 2
OFF
ON
ON
PRSNT 4
OFF
OFF
ON
J16
PRSNT 8 OFF OFF OFF NOTE: The interposer should be set to the lower lane width setting that matches between host and device.
J20 Slot_CLK Slot_CLK
1
2
3
Device Under Test
CompactPCI Serial Host Slot
DIP Switch Settings DIP Switch Settings
12V DC from adapter supplied
USB connector (factory use only)
Connecting the CompactPCI Serial Interposer 1.
Install the Interposer into the host system connector.
2.
Install the CompactPCI Serial expansion card under test (DUT) into the connector on the interposer.
3.
Set the SW1 DIP switches to the lower lane width setting that matches between host and device. Set the SW2 DIP switches to the desired clock selection.
4.
Connect 12V DC using the AC adapter supplied with the interposer. Make sure that the AC adapter is turned on.
5.
Connect the Summit T28 Analyzer (or other compatible Teledyne LeCroy analyzer) to the interposer using an iPass Y-cable (if using a Summit T24, use a x4-to-x8 straight cable).
6.
Connect the analyzer to a host computer system using the USB 2.0 port on the back panel of the Summit T28 analyzer.
7.
Install the software on the host system.
8.
Power on the analyzer.
9.
Power on the host system.
10. Use the Teledyne LeCroy software application to monitor, record and view PCI Express traffic in the CompactPCI Serial system.
1-800-909-7211 teledynelecroy.com
Lane Activity LEDs
Available Test Points on Interposer Test Point Signal Description TP26, 25 +12V +12V power supply from host to device. TP28, 27 +12V_AUX +12V_AUX power supply from host to device. TP32, 31 +3.3V +3.3V power supply from host to device. TP46, 45 +3.3V_AUX +3.3V_AUX power supply from host to device. TP48, 47 +5V +5V power supply from host to device. TP30, 29 -12V_AUX -12V_AUX power supply from host to device. The first test point listed above is used to measure the voltage. The second test point is the “_B” test point located after the current sensor. To measure the current draw on each power supply, measure the voltage difference between the two test points and divide by 0.02 (in the case of the +5V power supply, divide by 0.01). TP43 +2V5_RX +2.5V power for interposer (output of regulator U14). TP41 +2V5_TX +2.5V power for interposer (output of regulator U13). TP39 +3V3 +3.3V power for interposer (output of regulator U15). TP35 +3V3_RX +3.3V power for interposer (output of regulator U11). TP36 +3V3_TX +3.3V power for interposer (output of regulator U12). TP38 P12V +12V external power supply for interposer. GND TP33, TP34, TP37, TP40, TP42, TP44, and TP49. TP50 INHIBIT# Input to turn off all power to interposer (ground to turn off power). TP19 TP_CLKOUT2N Test point of PCIe reference clock (REFCLKN). TP18 TP_CLKOUT2P Test point of PCIe reference clock (REFCLKP). TP1 STANDBY CPCI-S signal STANDBY, see CPSI-Serial spec for details. TP2 MRSTI# CPCI-S signal MRSTI#, see CPSI-Serial spec for details. TP3 WAKE# CPCI-S signal WAKE#, see CPSI-Serial spec for details. TP4 PCIE_EN# CPCI-S signal PCIE_EN#, see CPSI-Serial spec for details. TP5 SYSEN# CPCI-S signal SYSEN#, see CPSI-Serial spec for details. TP8,9,10,11 GA0 thru GA3 CPCI-S signals GA0 through GA3, see CPSI-Serial spec. TP12 SATA_SDI CPCI-S signal SATA_SDI, see CPSI-Serial spec for details. TP13 SATA_SDO CPCI-S signal SATA_SDO, see CPSI-Serial spec for details. TP14 SATA_SCL CPCI-S signal SATA_SCL, see CPSI-Serial spec for details. TP15 SATA_SL CPCI-S signal SATA_SL, see CPSI-Serial spec for details.
Local sales offices are located throughout the world. Visit our website to find the most convenient location.
©2013 Teledyne LeCroy. All rights reserved. Specifications, prices, availability and delivery subject to change without notice. Product or brand names are trademarks or requested trademarks of their respective holders.
922388-00 Rev. B 0715
