Transcript
Company Profile
Fiber Optic Solutions Networking Solutions
Computers Solutions Electronics Solutions Software Solutions Website Solutions
Tel.:+966-3-8990205, Fax: +966-3-8978559 www.digitech.net.sa,
[email protected] Tel.:+966-3-8990205, Fax: +966-3-8978559 www.digitech.net.sa,
[email protected]
Kin g (D Fahd am ma Bin A mKh bdula ob ar ziz R Hw oa ay d )
Old location Of Edmark Al-Khobar
Gas Station
KIN G
Al Ramaniyah Mall
Alyssa Souk
Digital Technology Trading Est. Al-Kilaibi Tower 2nd Floor Room 203 P.O.Box 79310, Al-Khobar 31952 Kingdom of Saudi Arabia Tel.:+966-3-8990205 +966-3-8932712 Fax:+966-3-8978559 www.digitech.net.sa
[email protected]
Al Jawhara Commercial Center
Al Rammah Supermarket KIN G KH AL ED Everything ST . 10 Store Al-Kilaibi Tower Al Garawi Center
AL-KHOBAR CITY CENTER
DIGITECH Al-Khobar Location Map
Al Rajhi FA Bank HA D ST .
Alesayi
e qu os ad M ly Ro Ho aziz o l Tw bdu the in A f no hB dia dulla o t s b Cu ng A i K
Farm 9 Supermarket
AL SHAIKH TOWER
Head Office: DIGITECH Al-Khobar Al-Kilaibi Tower 2nd Floor Room 203 Side Entrance use the Elevator
Showroom
Al Salama Hospital
Music Master
Company name Address
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30.
ARAMCO (Harad Gas Plant) SWCC (Dammam) Military Hospital (Al-Hasa) Military School (Al-Kharj) Military School (Dhahran) King Fahd Causeway (Al-Khobar) Government Hospital (Al-Hasa) Marafiq (Jubail) ARAMCO (Khafji) AL-MUTLAQ (Dammam) CCC (Dammam) WESCOSA (Dammam) GE (Dammam) Al-Osais (Dammam) Shade (Dammam) Rezayat (Al-Khobar) JAL International (Dammam) ARAMCO (Abqaiq) Automation (Al-Khobar) Rashid Mall (Al-Khobar Emaar (Dammam) Ofsat Arabia (Abqaiq) Mother Care (Al-Khobar) Mall Of Dhahran (Al-Khobar) AFI (Jubail) Al Waha Mall (Dammam) NPC (Dammam) AL-SHUWAYER (Dammam) King Khalid International Airport (Riyadh) King Fahd International Airport (Dammam)
County
Registration form
Projects successfully completed
Company Details
Postcode
Delivery Details address
County Postcode
Contact Details Name Mobile Tel.: Fax: Web E-Mail
Digital Technology Trading Est., Al-Kilaibi Tower 2nd Floor Room 203 P.O.Box 79310, Al-Khobar 31952, Kingdom of Saudi Arabia Tel.:+966-3-8990205, +966-3-8932712, Fax:+966-3-8978559 www.digitech.net.sa,
[email protected] Join our Social Networks
14
Tel.:+966-3-8990205, Fax: +966-3-8978559
www.digitech.net.sa,
[email protected]
www.facebook.com/digitecharabia
www.twitter.com/digitecharabia
www.youtube.com/digitecharabia
[email protected]
Tel.:+966-3-8990205, Fax: +966-3-8978559
www.digitech.net.sa,
[email protected]
(Fiber cables, Fiber Optic Patch Panels, Fiber patch cord, Pigtail, Connectors, UTP Cables, UTP Patch panel, UTP Patch cords, Face plate..)
2
BELDEN
(Fiber cables, Fiber Optic Patch Panels, Fiber patch cord, Pigtail, Connectors, UTP Cables, UTP Patch panel, UTP Patch cords, Face plate..)
3
HUBBELL
(Fiber cables, Fiber Optic Patch Panels, Fiber patch cord, Pigtail, Connectors, UTP Cables, UTP Patch panel, UTP Patch cords, Face plate..)
4
3M
(Fiber cables, Fiber Optic Patch Panels, Fiber patch cord, Pigtail, Connectors, UTP Cables, UTP Patch panel, UTP Patch cords, Face plate..)
5
NETBOX
(Fiber cables, Fiber Optic Patch Panels, Fiber patch cord, Pigtail, Connectors, UTP Cables, UTP Patch panel, UTP Patch cords, Face plate..)
6
SMARTNET
(Fiber cables, Fiber Optic Patch Panels, Fiber patch cord, Pigtail, Connectors, UTP Cables, UTP Patch panel, UTP Patch cords, Face plate..)
7
LAZER TEC
12 13
Farm 9 Supermarket
14
www.digitech.net.sa,
[email protected]
15 16 17 18 19 20 21 22
(Fiber cables, Fiber Optic Patch Panels, Fiber patch cord, Pigtail, Connectors, UTP Cables, UTP Patch panel, UTP Patch cords, Face plate..) D-Link (Switches, GIBIC, Routers, Aces Point, Camera...) ESSEX (Fiber cables, UTP Cables, Telephone cables...) HP (Switches, GIBIC, Servers, Desktop, Laptop....) PANASONIC (IP Camera, PBX, Printer, Telephone....) Microsoft (Microsoft Server 2008, Windows Pro 7...) CISCO (Switches, GIBIC, Router, Aces Point....) FLUKE (Splicing Machine, Test Meter....) APC (APC UPS, Network Cards....) LINKSYS (Switch, Aces point, Router....) DELL (Desktop, Lap top, Monitor....) SAMSUNG (Monitor, Desktop, Laptop....) LG (Monitor, Desktop, Laptop....) FUJIKURA (Splicing Machine....) EXFO (OTDR Machine....) MEFC (Fiber cables....)
Tel.:+966-3-8990205, Fax: +966-3-8978559
www.digitech.net.sa,
[email protected]
Products Brands
SYATIMAX
8 9 10 11
Kin g (D Fahd am ma Bin A mKh bdula ob ar ziz R Hw oa ay d )
Old location Of Edmark Al-Khobar
AL SHAIKH TOWER
ue sq d o M oa oly iz R H o laz Tw bdu e A f th in n o lah B a i l d sto bdu Cu ng A Ki
Al Jawhara Commercial Center
Head Office: DIGITECH Al-Khobar Al-Kilaibi Tower 2nd Floor Room 203 Side Entrance use the Elevator
Showroom
Gas Station
KIN G
Al Rajhi FA Bank HA D ST .
Alesayi
Al Rammah Supermarket KIN G KH AL ED Everything ST . 10 Store Al-Kilaibi Tower Al Garawi Center Al Salama Hospital
Digital Technology Trading Est. Al-Kilaibi Tower 2nd Floor Room 203 P.O.Box 79310, Al-Khobar 31952 Kingdom of Saudi Arabia Tel.:+966-3-8990205 +966-3-8932712 Fax:+966-3-8978559 www.digitech.net.sa
[email protected]
Alyssa Souk Al Ramaniyah Mall
Location Map
AL-KHOBAR CITY CENTER
Music Master
Tel.:+966-3-8990205, Fax: +966-3-8978559
1
13
Why Choose Fiber Optic Cabling? Optical Fiber cables can be used as a medium for telecommunication and data networks because it is flexible and can be bundled as cables. It is especially advantageous for long-distance communications, because light propagates through the Fiber with little attenuation compared to electrical cables. This allows long distances to be spanned with few repeaters. Each fiber can carry many independent channels, each using a different wavelength of light (wavelength-division multiplexing) (WDM). The current laboratory fiber optic data rate record, held by Bell Labs in Villarceaux, France, is multiplexing 155 channels, each carrying 100 G bit/s over a 7000 km Fiber.
* Fiber Optic Solutions, * Networking Solutios,
For short distance applications, such as creating a network within an office building, Fiber-optic cabling can be used to save space in cable ducts. This is because a single fiber can often carry much more data than many electrical cables, such as 4 pair Cat-5 Ethernet cabling. Fiber is also immune to electrical interference; there is no cross-talk between signals in different cables and no pickup of environmental noise. They can also be used in environments where explosive fumes are present, without danger of ignition
* Computers Solutions,
More importantly the cost of Fiber has become very much in line with copper cabling in recent years making the transmission advantages economically viable.
* Website Solutions,
DIGITECH (Always Your IT Partner) can offer you the very best Fiber optic cabling solutions for your Fiber optic cabling project.
00966 3 8990205
There are many benefits for choosing Fiber optical cables for the future requirement of both LAN and WAN networks, these benefits include: • Transmission Security – As optical Fiber emits no electromagnetic energy there is no opportunity to intercept transmissions remotely. • Bandwidth – Optical Fiber has a much greater data capacity than copper, carrying more data further. • Transmission Distance – Optical systems have much lower attenuation than copper systems meaning that signals can be transmitted further. • No Risk of EMI or RFI – Fiber optic cables being primarily glass have no risk of electromagnetic or radio frequency interference.
Tel.:+966-3-8990205, Fax: +966-3-8978559
* Electronics Solutions, * Software Solutions,
* and More.....
Fiber Optic Solutions
Call Today for professional Fiber optic Cabling services
12
DIGITECH (Always Your IT Partner) is part of the DIGITECH Group, a Small and Medium Business located in Al-Khobar Kingdom of Saudi Arabia. Involved in various parts of Information Technology since 1999. We are committed to providing a total solution for your Information Technology needs,
Fiber Optic Solutions
Fiber Optic Solutions
Fiber optic cable capacity carry signals further and faster than copper at very competitive prices, so its use is set to increase on future projects.
www.digitech.net.sa,
[email protected]
DIGITECH (Always Your IT Partner) Solutions offer the design, installation and maintenance of external and internal Fiber optic networks and external cross site / campus cabling systems. We can offer Fiber optic cable installation services for Single mode OS1 and Multi-mode OM1 OM2 OM3 Fiber optic cables with full OTDR testing services for a complete solution. Our Fiber optic communication experience extends from the installation of internal Fiber networks to cross site Fiber optic cables up to 5km including Fiber optic cabling and Fiber Optic transmission equipment and termination solutions. These projects vary from communication cables to plant control cables for process and control systems. Our Fiber optic engineers are MOD cleared and experienced in working in petro-chemical, industrial and MOD environments.
Tel.:+966-3-8990205, Fax: +966-3-8978559
www.digitech.net.sa,
[email protected]
1
Tools
Support Services CAD Work Description 4-slots Modular Mainframe unit WITH two(2) batteries Includes: - FTB-500 Certificate of Compliance - Instruction Manual (.pdf format) - ToolBox 8 Software Environment (Pre-Loaded) Hard Disk Drive: 80 GB minimum - Memory: 2 GB SDRAM USB Keyboard & Mouse - EXFO FIP Connector Interface. (Probe not incl.) AC Power Cord - Semi-Rigid Carrying Case w/ Wheels+Handle:
DIGITECH (Always Your IT Partner) offer a full CAD 2008 drawing support to all of the cabling and equipment projects undertaken. Clients can supply project drawings for cross site duct routes, computer room or Rack layouts and we will amend to 'As Built' status at the end of the project. We can also offer Visio 2007 drawing when carrying out site surveys to accompany site survey packs and quotations. Either format of drawing can be supplied as requested by the client to meet the projects handover documentation requirement. Our installation teams have been engaged to carry out nationwide surveys of equipment racks, server rooms and cross site Fiber cable routes. The projects have required the surveyors to complete Visio drawings (typical below) from the survey the installation teams will carry out the necessary works.
Fujikura FSM-60S Fusion Splicer Description * Core to core alignment by PAS Profile Alignment System technology. * Environmental resistant features. * World's most compact and lightest of its class. * Arc calibration-free system. * 4.1" TFT color LCD monitor. * Dual directional operation system. * Long life battery. * Fiber holder option. * Software upgrade via Internet. * Detachable work table
Fiber Optic Solutions
Fiber Optic Solutions
EXFO FTB-500-QTR
Visio Drawing from Site Survey showing existing and new power and data containment routes.
3M 6362-230V 3M™ Hot Melt Fiber Termination Kit (230V) Hot Melt Termination Kit 6362-230V contains all materials needed to install FC, SC and ST Hot Melt Connectors. Kit comes with 230V Oven. 6650-LC required when using with LC Hot Melt connectors. 3M™ Hot Melt LC Expansion Kit LC Expansion Kit. The 6650-LC Expansion Kit contains the necessary tools to terminate the Hot Melt LC and must be used in conjunction with the 6366/6362-230V Hot Melt Termination Kit.
2
Tel.:+966-3-8990205, Fax: +966-3-8978559
www.digitech.net.sa,
[email protected]
Tel.:+966-3-8990205, Fax: +966-3-8978559
www.digitech.net.sa,
[email protected]
11
Clients who have the ability to install cabling are offered a bespoke cable manufacturing service for the products not available off the shelf. This allows clients to be advised of the product they need for the type of communication they need to achieve. Then a product such as a cable loom terminated one end to a patch panel can be manufactured with tails of the exact length. This allows the installer to make a really neat installation and not have to coil and use valuable under floor space.
Fiber Optic Solutions
Products can be manufactured and tested across all our range of cabling services singularly or in combination to achieve a communication solution. Furthermore we can survey to advise the best options and build an exact length solution.
We can offer bespoke manufacture of • • • • • •
10
Cat5e data cabling looms terminated to patch panels or one end tailed Cat5 data cabling looms terminated to patch panels Fiber Optic cables loomed or singular terminated with any combination of Fiber connectors Ruggedized Fiber optic cables for harsh environments Voice cable looms in cat5e or CW 1308 Fiber to the desk pre-manufactured cables.
Tel.:+966-3-8990205, Fax: +966-3-8978559
www.digitech.net.sa,
[email protected]
Cable Selection and Installation The use of Fiber optic cabling is increasing as systems demand higher bandwidth and performance. The correct cable selection is vital from the start to meet both performance and environmental requirements.Our clients can expect expert advice in the best fiber optic cabling solution to meet their current and future needs.When selecting the correct cable for any installation the first question should be the fiber type. This will be dependent upon the transmission distance required and the bandwidth, i.e. 1 GB or 10 GB Ethernet.We offer full site surveys allowing us to specify the correct fiber optic cable and design the network. What Mode of Fiber do I need? Multi mode or Single mode Fiber is the most important choice which is driven by the transmission distance you require.Multi mode fiber has a relatively large light carrying core, usually 62.5 microns or larger in diameter. It is usually used for short distance transmissions with LED based fiber optic equipment. Single-mode fiber has a small light carrying core of 8 to 10 microns in diameter. It is normally used for long distance transmissions with laser diode based fiber optic transmission equipment. Distance Guide OS1 Single Mode Fiber public network or long distance OM1 62.5/125 1000mbps upto 280m OM2 50/125 1000mbps upto 550m OM3 50/125 1000mbps upto 800m OM3 50/125 10,000mbps (10gig) up to 300m Mode How Many Fibers Are Required? This should take into account future demand and allow an element of redundancy. The cost of installation and associated down time will generally outweigh the cost of additional Fiber on day one.Additionally, good practice should be taken into consideration. A large high Fiber count cable carrying the majority of a company’s data generates a larger risk than several lower Fiber count cables should any cable damage occur. What Type of Cable is required? The prime function of the cable is to provide a safe path for the fiber during and post installation. There are a wide variety of cable types to choose from depending on how and where the cable is to be installed. The main types and their intended usage are listed below: • Universal Cables – designed for both internal and external use. They have a Low Smoke Halogen Free (LSHF) compound sheath that reduces the emission of toxic fumes and reduces the spread of fire • Outdoor Cables – designed for external use only and have a low density polyethylene sheath that makes them lighter that the equivalent LSHF version. This makes them more suitable for longer pulled runs. • Breakout and Patch Cables – these are generally installed within equipment rooms as rack to rack links. • Loose Tube Cables – provide higher Fiber counts and can generally be installed as building or campus links. • Tight Buffered-Is suitable for use in internal and external environments • SWA (Steel Wired Armoured)- Providing rodent proof protection with a steel wire armour covering the cable • CST (Corrugated Steel Tape)- Suitable for direct burial into a trench is also rodent proof a cost effective solution against SWA
Tel.:+966-3-8990205, Fax: +966-3-8978559
www.digitech.net.sa,
[email protected]
Fiber Optic Solutions
Manufactured Cabling Solutions
3
DIGITECH (Always Your IT Partner) specialise in providing cable installation solutions when buildings, campus and process plant require communication links for data or control signals using Fiber optic cabling. We will carry out a free survey of your site and design a fiber optic cabling route or Fiber network to meet your cabling project requirement. Our engineers will advise the correct type of Fiber cable for the environment and data transmission rate. Our cable installation experience ranges from prestigious office buildings, airside to harse environment process plants so we will be able to offer you the best in Fiber optic cabling solutions professionally installed and tested.Our specialist Fiber optic installation teams who are fully trained and equipped will install all external single mode Fiber optic and multimode Fiber optic cabling to meet the data transfer rate and distance requirement. This may utilise existing cable duct routes that we will rod and rope if required or we can offer civil construction of a new duct and pit system for the required route. Alternatively we can advise if aerial Fiber optic cabling or wireless may prove a cost effective solution.Duct route construction, proving, rod & roping and cable pulling services allow us to provide the cable route plus the cable installation of all mode and types of Fiber optic cabling.A typical Fiber optic cable installation may be a cross site link between two buildings connecting servers for local area networks. We have been involved with the installation of hundreds of kilometres of external Fiber optic cabling and have a proven track record of cross site Fiber installations of single pulls in excess of 5km. We are able carry out installations of tight buffered and loose tube Fibers CST or armoured Fiber optic cables in the following types: • OS1 9/125 • OM1 62.5/125 • OM2 50/125 • OM3 50/125 Full OTDR testing, fusion splicing and Fiber optic cable repair services are available. We are able to offer nationwide Fiber optic cable installations using: • Direct cable pulling • Winching • Rodding and roping • OTDR testing • Fusion splicing • Fiber optic cable Pedcap jointing • LSPM Fiber proving We are also able to offer a civil engineering capability for the following: • Trenching and digging • Installation of new ducting • Installation of new pits • Repairs of blocked or collapsed ducts • Duct route design & specification • Surveys
4
Tel.:+966-3-8990205, Fax: +966-3-8978559
www.digitech.net.sa,
[email protected]
Fiber Optic Transmission Equipment To add to DIGITECH (Always Your IT Partner) total cabling solutions we offer the design, supply and installation of Fiber to copper media converters this allows a cross site or internal link of Fiber cabling to link back into your main network. This can be achieved by either installing a single stand alone media converter which has a duplex Fiber adapter as an input and then a single RJ45 port as the output, this will then patch into your existing network switch. The alternative is to purchase a network switch which comes with built in SFP slots (Small form factor transmission ports) this then allows you to purchase the SFP ports singilary and simply plug them into one installed the Fiber can be patched direct form the patch panel to the switch this then allows you to connect multiple building or floor back to your main network. Typical Applications: Floor to floor Fiber links Building to building Fiber links within one site Campus to campus links one site to another site CCTV camera locations- recorders
Fiber media converters are simple networking devices that make it possible to connect two dissimilar media types such as twisted pair with Fiber optic cabling. They were introduced to the industry nearly two decades ago, and are important in interconnecting fiber optic cabling-based systems with existing copper-based, structured cabling systems.
Fiber Optic Solutions
Fiber Optic Solutions
External Fiber Cable Installation
Fiber media converters can connect different local area network (LAN) media, modifying duplex and speed settings. Switching media converters can connect legacy 10Base-T network segments to 100Base-TX or 100Base-FX fast Ethernet infrastructure. When expanding the reach of the LAN to span multiple locations, media converters are useful in connecting multiple LANs to form one large campus area network that spans over a limited geographic area. As premises networks are primarily copper-based, media converters can extend the reach of the LAN over single-mode fiber up to 130 kilometers with 1550 nm optics. Other benefits of media conversion include providing a gradual migration path from copper to fiber. Fiber connections can reduce electromagnetic interference.
Tel.:+966-3-8990205, Fax: +966-3-8978559
www.digitech.net.sa,
[email protected]
9
Fiber Optic Solutions
Our engineers terminate Fiber optic cables onsite whether installed by us, yourselves or existing cables. All cable types including Single mode Fiber (9/125µm) or Multimode (62.5/125µm and 50/125µm ) can be terminated with the required type of Fiber termination. The Fiber cables can be terminated and presented with ST, SC, LC, MTRJ, FC/PC type Fiber terminations to suit the equipment to be connected. The preferred method is Fusion Splicing pre-manufactured 'Pigtails' with the required Fiber termination onto the main Fiber optic cable. This would then normally be presented in a Fiber optic patch panel and installed in a patching rack. We can offer variations to the presentation with wall mounted, Industrial hazardous area Fiber termination boxes.
Fiber Network Cable Installation Our engineers are Fiber optic cabling specialists and able to carry out internal Fiber optic network installations of tight buffered and loose tube Fibers in the following types: • • • •
OS1 9/125 OM1 62.5/125 OM2 50/125 OM3 50/125
The applications for Fiber optic cabling are wide and its use is increasing as bandwidth hungry data networks evolve. Often as the copper data network increases in user numbers and bandwidth requirement the Fiber backbone is over looked resulting in decreasing network performance. We can survey, test performance, specify and install the correct Fiber optic cable to meet the requirement. Fiber to the desk is a way of future proofing your network cabling and offers a competitive Fiber communication solution for internal Fiber optic networks. Once the decision on the application and the correct Fiber optic cable has been made our engineers will professionally install all cabling and containment to the highest standards. Furthermore we can supply and install the floor or wall mounted patching racks, Fiber patch panels and Fiber patch leads to complete the system. When working internally our engineers are experienced in working in prestigious and listed buildings in live environments without causing disruption to occupants. The design always takes into consideration the end appearance of an installation making use of any routes that make the cable routes out of sight. We offer Free Surveys and quotation for all you Fiber optic cabling requirements. We are also able to offer the installation of PVC and galvanised containment infrastructure in the following methods:
Fusion Splicing Our preferred method of Fiber optic termination is to splice a Fiber onto a pigtail which is pre-terminated with the required type of connector. This provides the best results with minimal loss with the latest fusion splicing equipment our engineers can splice high volumes of Fibers in situ. Connector Types The ST is still the most popular multimode connector because it is cheap and easy to install. It has a bayonet mount and a long cylindrical ferrule to hold the Fiber. Most ferrules are ceramic, but some are metal or plastic and because they are spring-loaded, you have to make sure they are seated properly.
• • • • • •
Fiber Optic Solutions
Fiber Optic Splice and Termination
Flexible conduit Rigid conduit Trunking Tray work Basket work Dado trunking
Single mode networks use FC or SC connectors in about the same proportion as ST and SC in multimode installations. SC is a snap-in connector that is widely used in single mode systems for its excellent performance. It's a snap-in connector that latches with a simple push-pull motion. It is also available in a duplex configuration. FC/PC has been one of the most popular single mode connectors for many years. It screws on firmly, but make sure you have the key aligned in the slot properly before tightening. It's being replaced by SCs and LCs.
8
Tel.:+966-3-8990205, Fax: +966-3-8978559
www.digitech.net.sa,
[email protected]
Tel.:+966-3-8990205, Fax: +966-3-8978559
www.digitech.net.sa,
[email protected]
5
Fiber Optic Solutions
Fiber optic cables are extremely reliable allowing them to be used in critical data communications and control transmission operations so when they fail they cause major problems. If you have a Fiber optic cable failure then you require fast and responsive assistance in order to first locate the problem and then effect a temporary or permanent repair. DIGITECH (Always Your IT Partner) has been called out to repair Fiber optic cables from major cable destruction from construction activities involving excavation to simple termination failures. Our engineers come with fully equipped vehicles carrying the latest test and splicing equipment. This allows fast location of faults and the ability to offer professional advice to cable managers on how we can get the cable system repaired and fully functioning. On completion the cable will be fully OTDR tested and full test results will be provided on completion. We are able to offer nationwide Fiber optic cable fault finding and repair: • • • • • • • •
We are also able to offer a civil engineering repair capability for the following: • • • • • • •
6
Light source power meter (LSPM) Fiber proving and testing OTDR testing service Fiber optic cable fault finding service internal/ external Test & repairs to all Fiber types including Multimode and single mode Fiber optic cables Temporary rerouting of damaged cables Fusion splicing Fiber optic cable Pedcap jointing Fiber optic cable re termination
Damaged Cable duct repairs Collapsed duct repairs Damaged Pit repairs and reconstruction Proving of blocked or collapsed ducts Rod and roping Duct route design & specification Surveys
Tel.:+966-3-8990205, Fax: +966-3-8978559
Fiber Optic Cable Testing We are able to carry out Fiber optic fault finding and Fiber optic testing using an OTDR and visible light source on OS1 9/125, OM1 62.5/125, OM2 50/125 & OM3 50/125 Fiber cables. After the cables are installed and terminated testing can commence. Every Fiber optic cable will need to be tested for continuity, end-to-end loss and then fault found if there are any problems. If it's a long external Fiber optic cable with intermediate splices, you will probably want to verify the individual splices with an OTDR also, since that's the only way to make sure that each one is good. If the cabling is for a Fiber optic network we will also be testing power, as power is the measurement that tells you whether the system is operating properly. Our engineers are fully equipped with mobile test facilities to allow cables to be spliced and tested within vehicles, plant areas or buildings. A full range of Fiber optic launch leads allows us to test all types of lengths and cables and produce full test results to show cable performance. We have experience of providing these services for the MOD, BT and petrochemical projects with nationwide coverage. • •
Testing of OM1, OM2 and OM3 to 850nm and 1300nm wavelengths Testing of OS1 to 1310nm and 1550nm wavelengths
Visual Tracing LS Continuity checking makes certain the Fibers are not broken and to trace a path of a Fiber from one end to another through many connections with the use of a visible light source. This allows us to carry out a first line check to identify a faulty or a functional Fiber very quickly.
Fiber Optic Solutions
Fiber Optic Cable Repairs
OTDR Testing Unlike light sources and power meters which measure the loss of the Fiber optic cable plant directly, the OTDR works indirectly. The source and meter duplicate the transmitter and receiver of the Fiber optic transmission link, so the measurement correlates well with actual system loss. The OTDR, however, uses backscattered light of the Fiber to imply loss. The OTDR works like RADAR, sendinga high power laser light pulse down the Fiber and looking for return signals from backscattered light in the Fiber itself or reflected light from connector or splice interfaces.At any point in time, the light the OTDR sees is the light scattered from the pulse passing through a region of the Fiber. Only a small amount of light is scattered back toward the OTDR, but with sensitive receivers and signal averaging, it is possible to make measurements over relatively long distances. Since it is possible to calibrate the speed of the pulse as it passes down the Fiber, the OTDR can measure time, calculate the pulse position in the Fiber and correlate what it sees in backscattered light with an actual location in the Fiber. Thus it can create a display of the amount of backscattered light at any point in the Fiber. Since the pulse is attenuated in the Fiber as it passes along the Fiber and suffers loss in connectors and splices, the amount of power in the test pulse decreases as it passes along the Fiber in the cable plant under test. Thus the portion of the light being backscattered will be reduced accordingly, producing a picture of the actual loss occurring in the Fiber. The OTDR presents this information onto the display allowing the engineer to detect problems in the cable caused during installation. If a Fiber is broken, it will show up as the end of the Fiber much shorter than the cable or a high loss splice at the wrong place. If excessive stress is placed on the cable due to kinking or too tight a bend radius, it will look like a splice at the wrong location. All of our installations are completely tested and quality assured and supplied with hard and soft copytest results.
www.digitech.net.sa,
[email protected]
Tel.:+966-3-8990205, Fax: +966-3-8978559
www.digitech.net.sa,
[email protected]
7
Fiber Optic Solutions
Fiber optic cables are extremely reliable allowing them to be used in critical data communications and control transmission operations so when they fail they cause major problems. If you have a Fiber optic cable failure then you require fast and responsive assistance in order to first locate the problem and then effect a temporary or permanent repair. DIGITECH (Always Your IT Partner) has been called out to repair Fiber optic cables from major cable destruction from construction activities involving excavation to simple termination failures. Our engineers come with fully equipped vehicles carrying the latest test and splicing equipment. This allows fast location of faults and the ability to offer professional advice to cable managers on how we can get the cable system repaired and fully functioning. On completion the cable will be fully OTDR tested and full test results will be provided on completion. We are able to offer nationwide Fiber optic cable fault finding and repair: • • • • • • • •
We are also able to offer a civil engineering repair capability for the following: • • • • • • •
6
Light source power meter (LSPM) Fiber proving and testing OTDR testing service Fiber optic cable fault finding service internal/ external Test & repairs to all Fiber types including Multimode and single mode Fiber optic cables Temporary rerouting of damaged cables Fusion splicing Fiber optic cable Pedcap jointing Fiber optic cable re termination
Damaged Cable duct repairs Collapsed duct repairs Damaged Pit repairs and reconstruction Proving of blocked or collapsed ducts Rod and roping Duct route design & specification Surveys
Tel.:+966-3-8990205, Fax: +966-3-8978559
Fiber Optic Cable Testing We are able to carry out Fiber optic fault finding and Fiber optic testing using an OTDR and visible light source on OS1 9/125, OM1 62.5/125, OM2 50/125 & OM3 50/125 Fiber cables. After the cables are installed and terminated testing can commence. Every Fiber optic cable will need to be tested for continuity, end-to-end loss and then fault found if there are any problems. If it's a long external Fiber optic cable with intermediate splices, you will probably want to verify the individual splices with an OTDR also, since that's the only way to make sure that each one is good. If the cabling is for a Fiber optic network we will also be testing power, as power is the measurement that tells you whether the system is operating properly. Our engineers are fully equipped with mobile test facilities to allow cables to be spliced and tested within vehicles, plant areas or buildings. A full range of Fiber optic launch leads allows us to test all types of lengths and cables and produce full test results to show cable performance. We have experience of providing these services for the MOD, BT and petrochemical projects with nationwide coverage. • •
Testing of OM1, OM2 and OM3 to 850nm and 1300nm wavelengths Testing of OS1 to 1310nm and 1550nm wavelengths
Visual Tracing LS Continuity checking makes certain the Fibers are not broken and to trace a path of a Fiber from one end to another through many connections with the use of a visible light source. This allows us to carry out a first line check to identify a faulty or a functional Fiber very quickly.
Fiber Optic Solutions
Fiber Optic Cable Repairs
OTDR Testing Unlike light sources and power meters which measure the loss of the Fiber optic cable plant directly, the OTDR works indirectly. The source and meter duplicate the transmitter and receiver of the Fiber optic transmission link, so the measurement correlates well with actual system loss. The OTDR, however, uses backscattered light of the Fiber to imply loss. The OTDR works like RADAR, sendinga high power laser light pulse down the Fiber and looking for return signals from backscattered light in the Fiber itself or reflected light from connector or splice interfaces.At any point in time, the light the OTDR sees is the light scattered from the pulse passing through a region of the Fiber. Only a small amount of light is scattered back toward the OTDR, but with sensitive receivers and signal averaging, it is possible to make measurements over relatively long distances. Since it is possible to calibrate the speed of the pulse as it passes down the Fiber, the OTDR can measure time, calculate the pulse position in the Fiber and correlate what it sees in backscattered light with an actual location in the Fiber. Thus it can create a display of the amount of backscattered light at any point in the Fiber. Since the pulse is attenuated in the Fiber as it passes along the Fiber and suffers loss in connectors and splices, the amount of power in the test pulse decreases as it passes along the Fiber in the cable plant under test. Thus the portion of the light being backscattered will be reduced accordingly, producing a picture of the actual loss occurring in the Fiber. The OTDR presents this information onto the display allowing the engineer to detect problems in the cable caused during installation. If a Fiber is broken, it will show up as the end of the Fiber much shorter than the cable or a high loss splice at the wrong place. If excessive stress is placed on the cable due to kinking or too tight a bend radius, it will look like a splice at the wrong location. All of our installations are completely tested and quality assured and supplied with hard and soft copytest results.
www.digitech.net.sa,
[email protected]
Tel.:+966-3-8990205, Fax: +966-3-8978559
www.digitech.net.sa,
[email protected]
7
Fiber Optic Solutions
Our engineers terminate Fiber optic cables onsite whether installed by us, yourselves or existing cables. All cable types including Single mode Fiber (9/125µm) or Multimode (62.5/125µm and 50/125µm ) can be terminated with the required type of Fiber termination. The Fiber cables can be terminated and presented with ST, SC, LC, MTRJ, FC/PC type Fiber terminations to suit the equipment to be connected. The preferred method is Fusion Splicing pre-manufactured 'Pigtails' with the required Fiber termination onto the main Fiber optic cable. This would then normally be presented in a Fiber optic patch panel and installed in a patching rack. We can offer variations to the presentation with wall mounted, Industrial hazardous area Fiber termination boxes.
Fiber Network Cable Installation Our engineers are Fiber optic cabling specialists and able to carry out internal Fiber optic network installations of tight buffered and loose tube Fibers in the following types: • • • •
OS1 9/125 OM1 62.5/125 OM2 50/125 OM3 50/125
The applications for Fiber optic cabling are wide and its use is increasing as bandwidth hungry data networks evolve. Often as the copper data network increases in user numbers and bandwidth requirement the Fiber backbone is over looked resulting in decreasing network performance. We can survey, test performance, specify and install the correct Fiber optic cable to meet the requirement. Fiber to the desk is a way of future proofing your network cabling and offers a competitive Fiber communication solution for internal Fiber optic networks. Once the decision on the application and the correct Fiber optic cable has been made our engineers will professionally install all cabling and containment to the highest standards. Furthermore we can supply and install the floor or wall mounted patching racks, Fiber patch panels and Fiber patch leads to complete the system. When working internally our engineers are experienced in working in prestigious and listed buildings in live environments without causing disruption to occupants. The design always takes into consideration the end appearance of an installation making use of any routes that make the cable routes out of sight. We offer Free Surveys and quotation for all you Fiber optic cabling requirements. We are also able to offer the installation of PVC and galvanised containment infrastructure in the following methods:
Fusion Splicing Our preferred method of Fiber optic termination is to splice a Fiber onto a pigtail which is pre-terminated with the required type of connector. This provides the best results with minimal loss with the latest fusion splicing equipment our engineers can splice high volumes of Fibers in situ. Connector Types The ST is still the most popular multimode connector because it is cheap and easy to install. It has a bayonet mount and a long cylindrical ferrule to hold the Fiber. Most ferrules are ceramic, but some are metal or plastic and because they are spring-loaded, you have to make sure they are seated properly.
• • • • • •
Fiber Optic Solutions
Fiber Optic Splice and Termination
Flexible conduit Rigid conduit Trunking Tray work Basket work Dado trunking
Single mode networks use FC or SC connectors in about the same proportion as ST and SC in multimode installations. SC is a snap-in connector that is widely used in single mode systems for its excellent performance. It's a snap-in connector that latches with a simple push-pull motion. It is also available in a duplex configuration. FC/PC has been one of the most popular single mode connectors for many years. It screws on firmly, but make sure you have the key aligned in the slot properly before tightening. It's being replaced by SCs and LCs.
8
Tel.:+966-3-8990205, Fax: +966-3-8978559
www.digitech.net.sa,
[email protected]
Tel.:+966-3-8990205, Fax: +966-3-8978559
www.digitech.net.sa,
[email protected]
5
DIGITECH (Always Your IT Partner) specialise in providing cable installation solutions when buildings, campus and process plant require communication links for data or control signals using Fiber optic cabling. We will carry out a free survey of your site and design a fiber optic cabling route or Fiber network to meet your cabling project requirement. Our engineers will advise the correct type of Fiber cable for the environment and data transmission rate. Our cable installation experience ranges from prestigious office buildings, airside to harse environment process plants so we will be able to offer you the best in Fiber optic cabling solutions professionally installed and tested.Our specialist Fiber optic installation teams who are fully trained and equipped will install all external single mode Fiber optic and multimode Fiber optic cabling to meet the data transfer rate and distance requirement. This may utilise existing cable duct routes that we will rod and rope if required or we can offer civil construction of a new duct and pit system for the required route. Alternatively we can advise if aerial Fiber optic cabling or wireless may prove a cost effective solution.Duct route construction, proving, rod & roping and cable pulling services allow us to provide the cable route plus the cable installation of all mode and types of Fiber optic cabling.A typical Fiber optic cable installation may be a cross site link between two buildings connecting servers for local area networks. We have been involved with the installation of hundreds of kilometres of external Fiber optic cabling and have a proven track record of cross site Fiber installations of single pulls in excess of 5km. We are able carry out installations of tight buffered and loose tube Fibers CST or armoured Fiber optic cables in the following types: • OS1 9/125 • OM1 62.5/125 • OM2 50/125 • OM3 50/125 Full OTDR testing, fusion splicing and Fiber optic cable repair services are available. We are able to offer nationwide Fiber optic cable installations using: • Direct cable pulling • Winching • Rodding and roping • OTDR testing • Fusion splicing • Fiber optic cable Pedcap jointing • LSPM Fiber proving We are also able to offer a civil engineering capability for the following: • Trenching and digging • Installation of new ducting • Installation of new pits • Repairs of blocked or collapsed ducts • Duct route design & specification • Surveys
4
Tel.:+966-3-8990205, Fax: +966-3-8978559
www.digitech.net.sa,
[email protected]
Fiber Optic Transmission Equipment To add to DIGITECH (Always Your IT Partner) total cabling solutions we offer the design, supply and installation of Fiber to copper media converters this allows a cross site or internal link of Fiber cabling to link back into your main network. This can be achieved by either installing a single stand alone media converter which has a duplex Fiber adapter as an input and then a single RJ45 port as the output, this will then patch into your existing network switch. The alternative is to purchase a network switch which comes with built in SFP slots (Small form factor transmission ports) this then allows you to purchase the SFP ports singilary and simply plug them into one installed the Fiber can be patched direct form the patch panel to the switch this then allows you to connect multiple building or floor back to your main network. Typical Applications: Floor to floor Fiber links Building to building Fiber links within one site Campus to campus links one site to another site CCTV camera locations- recorders
Fiber media converters are simple networking devices that make it possible to connect two dissimilar media types such as twisted pair with Fiber optic cabling. They were introduced to the industry nearly two decades ago, and are important in interconnecting fiber optic cabling-based systems with existing copper-based, structured cabling systems.
Fiber Optic Solutions
Fiber Optic Solutions
External Fiber Cable Installation
Fiber media converters can connect different local area network (LAN) media, modifying duplex and speed settings. Switching media converters can connect legacy 10Base-T network segments to 100Base-TX or 100Base-FX fast Ethernet infrastructure. When expanding the reach of the LAN to span multiple locations, media converters are useful in connecting multiple LANs to form one large campus area network that spans over a limited geographic area. As premises networks are primarily copper-based, media converters can extend the reach of the LAN over single-mode fiber up to 130 kilometers with 1550 nm optics. Other benefits of media conversion include providing a gradual migration path from copper to fiber. Fiber connections can reduce electromagnetic interference.
Tel.:+966-3-8990205, Fax: +966-3-8978559
www.digitech.net.sa,
[email protected]
9
Clients who have the ability to install cabling are offered a bespoke cable manufacturing service for the products not available off the shelf. This allows clients to be advised of the product they need for the type of communication they need to achieve. Then a product such as a cable loom terminated one end to a patch panel can be manufactured with tails of the exact length. This allows the installer to make a really neat installation and not have to coil and use valuable under floor space.
Fiber Optic Solutions
Products can be manufactured and tested across all our range of cabling services singularly or in combination to achieve a communication solution. Furthermore we can survey to advise the best options and build an exact length solution.
We can offer bespoke manufacture of • • • • • •
10
Cat5e data cabling looms terminated to patch panels or one end tailed Cat5 data cabling looms terminated to patch panels Fiber Optic cables loomed or singular terminated with any combination of Fiber connectors Ruggedized Fiber optic cables for harsh environments Voice cable looms in cat5e or CW 1308 Fiber to the desk pre-manufactured cables.
Tel.:+966-3-8990205, Fax: +966-3-8978559
www.digitech.net.sa,
[email protected]
Cable Selection and Installation The use of Fiber optic cabling is increasing as systems demand higher bandwidth and performance. The correct cable selection is vital from the start to meet both performance and environmental requirements.Our clients can expect expert advice in the best fiber optic cabling solution to meet their current and future needs.When selecting the correct cable for any installation the first question should be the fiber type. This will be dependent upon the transmission distance required and the bandwidth, i.e. 1 GB or 10 GB Ethernet.We offer full site surveys allowing us to specify the correct fiber optic cable and design the network. What Mode of Fiber do I need? Multi mode or Single mode Fiber is the most important choice which is driven by the transmission distance you require.Multi mode fiber has a relatively large light carrying core, usually 62.5 microns or larger in diameter. It is usually used for short distance transmissions with LED based fiber optic equipment. Single-mode fiber has a small light carrying core of 8 to 10 microns in diameter. It is normally used for long distance transmissions with laser diode based fiber optic transmission equipment. Distance Guide OS1 Single Mode Fiber public network or long distance OM1 62.5/125 1000mbps upto 280m OM2 50/125 1000mbps upto 550m OM3 50/125 1000mbps upto 800m OM3 50/125 10,000mbps (10gig) up to 300m Mode How Many Fibers Are Required? This should take into account future demand and allow an element of redundancy. The cost of installation and associated down time will generally outweigh the cost of additional Fiber on day one.Additionally, good practice should be taken into consideration. A large high Fiber count cable carrying the majority of a company’s data generates a larger risk than several lower Fiber count cables should any cable damage occur. What Type of Cable is required? The prime function of the cable is to provide a safe path for the fiber during and post installation. There are a wide variety of cable types to choose from depending on how and where the cable is to be installed. The main types and their intended usage are listed below: • Universal Cables – designed for both internal and external use. They have a Low Smoke Halogen Free (LSHF) compound sheath that reduces the emission of toxic fumes and reduces the spread of fire • Outdoor Cables – designed for external use only and have a low density polyethylene sheath that makes them lighter that the equivalent LSHF version. This makes them more suitable for longer pulled runs. • Breakout and Patch Cables – these are generally installed within equipment rooms as rack to rack links. • Loose Tube Cables – provide higher Fiber counts and can generally be installed as building or campus links. • Tight Buffered-Is suitable for use in internal and external environments • SWA (Steel Wired Armoured)- Providing rodent proof protection with a steel wire armour covering the cable • CST (Corrugated Steel Tape)- Suitable for direct burial into a trench is also rodent proof a cost effective solution against SWA
Tel.:+966-3-8990205, Fax: +966-3-8978559
www.digitech.net.sa,
[email protected]
Fiber Optic Solutions
Manufactured Cabling Solutions
3
Tools
Support Services CAD Work Description 4-slots Modular Mainframe unit WITH two(2) batteries Includes: - FTB-500 Certificate of Compliance - Instruction Manual (.pdf format) - ToolBox 8 Software Environment (Pre-Loaded) Hard Disk Drive: 80 GB minimum - Memory: 2 GB SDRAM USB Keyboard & Mouse - EXFO FIP Connector Interface. (Probe not incl.) AC Power Cord - Semi-Rigid Carrying Case w/ Wheels+Handle:
DIGITECH (Always Your IT Partner) offer a full CAD 2008 drawing support to all of the cabling and equipment projects undertaken. Clients can supply project drawings for cross site duct routes, computer room or Rack layouts and we will amend to 'As Built' status at the end of the project. We can also offer Visio 2007 drawing when carrying out site surveys to accompany site survey packs and quotations. Either format of drawing can be supplied as requested by the client to meet the projects handover documentation requirement. Our installation teams have been engaged to carry out nationwide surveys of equipment racks, server rooms and cross site Fiber cable routes. The projects have required the surveyors to complete Visio drawings (typical below) from the survey the installation teams will carry out the necessary works.
Fujikura FSM-60S Fusion Splicer Description * Core to core alignment by PAS Profile Alignment System technology. * Environmental resistant features. * World's most compact and lightest of its class. * Arc calibration-free system. * 4.1" TFT color LCD monitor. * Dual directional operation system. * Long life battery. * Fiber holder option. * Software upgrade via Internet. * Detachable work table
Fiber Optic Solutions
Fiber Optic Solutions
EXFO FTB-500-QTR
Visio Drawing from Site Survey showing existing and new power and data containment routes.
3M 6362-230V 3M™ Hot Melt Fiber Termination Kit (230V) Hot Melt Termination Kit 6362-230V contains all materials needed to install FC, SC and ST Hot Melt Connectors. Kit comes with 230V Oven. 6650-LC required when using with LC Hot Melt connectors. 3M™ Hot Melt LC Expansion Kit LC Expansion Kit. The 6650-LC Expansion Kit contains the necessary tools to terminate the Hot Melt LC and must be used in conjunction with the 6366/6362-230V Hot Melt Termination Kit.
2
Tel.:+966-3-8990205, Fax: +966-3-8978559
www.digitech.net.sa,
[email protected]
Tel.:+966-3-8990205, Fax: +966-3-8978559
www.digitech.net.sa,
[email protected]
11
Why Choose Fiber Optic Cabling? Optical Fiber cables can be used as a medium for telecommunication and data networks because it is flexible and can be bundled as cables. It is especially advantageous for long-distance communications, because light propagates through the Fiber with little attenuation compared to electrical cables. This allows long distances to be spanned with few repeaters. Each fiber can carry many independent channels, each using a different wavelength of light (wavelength-division multiplexing) (WDM). The current laboratory fiber optic data rate record, held by Bell Labs in Villarceaux, France, is multiplexing 155 channels, each carrying 100 G bit/s over a 7000 km Fiber.
* Fiber Optic Solutions, * Networking Solutios,
For short distance applications, such as creating a network within an office building, Fiber-optic cabling can be used to save space in cable ducts. This is because a single fiber can often carry much more data than many electrical cables, such as 4 pair Cat-5 Ethernet cabling. Fiber is also immune to electrical interference; there is no cross-talk between signals in different cables and no pickup of environmental noise. They can also be used in environments where explosive fumes are present, without danger of ignition
* Computers Solutions,
More importantly the cost of Fiber has become very much in line with copper cabling in recent years making the transmission advantages economically viable.
* Website Solutions,
DIGITECH (Always Your IT Partner) can offer you the very best Fiber optic cabling solutions for your Fiber optic cabling project.
00966 3 8990205
There are many benefits for choosing Fiber optical cables for the future requirement of both LAN and WAN networks, these benefits include: • Transmission Security – As optical Fiber emits no electromagnetic energy there is no opportunity to intercept transmissions remotely. • Bandwidth – Optical Fiber has a much greater data capacity than copper, carrying more data further. • Transmission Distance – Optical systems have much lower attenuation than copper systems meaning that signals can be transmitted further. • No Risk of EMI or RFI – Fiber optic cables being primarily glass have no risk of electromagnetic or radio frequency interference.
Tel.:+966-3-8990205, Fax: +966-3-8978559
* Electronics Solutions, * Software Solutions,
* and More.....
Fiber Optic Solutions
Call Today for professional Fiber optic Cabling services
12
DIGITECH (Always Your IT Partner) is part of the DIGITECH Group, a Small and Medium Business located in Al-Khobar Kingdom of Saudi Arabia. Involved in various parts of Information Technology since 1999. We are committed to providing a total solution for your Information Technology needs,
Fiber Optic Solutions
Fiber Optic Solutions
Fiber optic cable capacity carry signals further and faster than copper at very competitive prices, so its use is set to increase on future projects.
www.digitech.net.sa,
[email protected]
DIGITECH (Always Your IT Partner) Solutions offer the design, installation and maintenance of external and internal Fiber optic networks and external cross site / campus cabling systems. We can offer Fiber optic cable installation services for Single mode OS1 and Multi-mode OM1 OM2 OM3 Fiber optic cables with full OTDR testing services for a complete solution. Our Fiber optic communication experience extends from the installation of internal Fiber networks to cross site Fiber optic cables up to 5km including Fiber optic cabling and Fiber Optic transmission equipment and termination solutions. These projects vary from communication cables to plant control cables for process and control systems. Our Fiber optic engineers are MOD cleared and experienced in working in petro-chemical, industrial and MOD environments.
Tel.:+966-3-8990205, Fax: +966-3-8978559
www.digitech.net.sa,
[email protected]
1
(Fiber cables, Fiber Optic Patch Panels, Fiber patch cord, Pigtail, Connectors, UTP Cables, UTP Patch panel, UTP Patch cords, Face plate..)
2
BELDEN
(Fiber cables, Fiber Optic Patch Panels, Fiber patch cord, Pigtail, Connectors, UTP Cables, UTP Patch panel, UTP Patch cords, Face plate..)
3
HUBBELL
(Fiber cables, Fiber Optic Patch Panels, Fiber patch cord, Pigtail, Connectors, UTP Cables, UTP Patch panel, UTP Patch cords, Face plate..)
4
3M
(Fiber cables, Fiber Optic Patch Panels, Fiber patch cord, Pigtail, Connectors, UTP Cables, UTP Patch panel, UTP Patch cords, Face plate..)
5
NETBOX
(Fiber cables, Fiber Optic Patch Panels, Fiber patch cord, Pigtail, Connectors, UTP Cables, UTP Patch panel, UTP Patch cords, Face plate..)
6
SMARTNET
(Fiber cables, Fiber Optic Patch Panels, Fiber patch cord, Pigtail, Connectors, UTP Cables, UTP Patch panel, UTP Patch cords, Face plate..)
7
LAZER TEC
12 13
Farm 9 Supermarket
14 15 16 17
www.digitech.net.sa,
[email protected]
18 19 20 21 22
(Fiber cables, Fiber Optic Patch Panels, Fiber patch cord, Pigtail, Connectors, UTP Cables, UTP Patch panel, UTP Patch cords, Face plate..) D-Link (Switches, GIBIC, Routers, Aces Point, Camera...) ESSEX (Fiber cables, UTP Cables, Telephone cables...) HP (Switches, GIBIC, Servers, Desktop, Laptop....) PANASONIC (IP Camera, PBX, Printer, Telephone....) Microsoft (Microsoft Server 2008, Windows Pro 7...) CISCO (Switches, GIBIC, Router, Aces Point....) FLUKE (Splicing Machine, Test Meter....) APC (APC UPS, Network Cards....) LINKSYS (Switch, Aces point, Router....) DELL (Desktop, Lap top, Monitor....) SAMSUNG (Monitor, Desktop, Laptop....) LG (Monitor, Desktop, Laptop....) FUJIKURA (Splicing Machine....) EXFO (OTDR Machine....) MEFC (Fiber cables....)
Tel.:+966-3-8990205, Fax: +966-3-8978559
www.digitech.net.sa,
[email protected]
Products Brands
SYATIMAX
8 9 10 11
Kin g (D Fahd am ma Bin A mKh bdula ob ar ziz R Hw oa ay d )
Old location Of Edmark Al-Khobar
AL SHAIKH TOWER
ue sq d o M oa oly iz R H o laz Tw bdu e A f th in n o lah B a i l d sto bdu Cu ng A Ki
Al Jawhara Commercial Center
Head Office: DIGITECH Al-Khobar Al-Kilaibi Tower 2nd Floor Room 203 Side Entrance use the Elevator
Showroom
Gas Station
KIN G
Al Rajhi FA Bank HA D ST .
Alesayi
Al Rammah Supermarket KIN G KH AL ED Everything ST . 10 Store Al-Kilaibi Tower Al Garawi Center Al Salama Hospital
Digital Technology Trading Est. Al-Kilaibi Tower 2nd Floor Room 203 P.O.Box 79310, Al-Khobar 31952 Kingdom of Saudi Arabia Tel.:+966-3-8990205 +966-3-8932712 Fax:+966-3-8978559 www.digitech.net.sa
[email protected]
Alyssa Souk Al Ramaniyah Mall
Location Map
AL-KHOBAR CITY CENTER
Music Master
Tel.:+966-3-8990205, Fax: +966-3-8978559
1
13
Company name Address
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30.
ARAMCO (Harad Gas Plant) SWCC (Dammam) Military Hospital (Al-Hasa) Military School (Al-Kharj) Military School (Dhahran) King Fahd Causeway (Al-Khobar) Government Hospital (Al-Hasa) Marafiq (Jubail) ARAMCO (Khafji) AL-MUTLAQ (Dammam) CCC (Dammam) WESCOSA (Dammam) GE (Dammam) Al-Osais (Dammam) Shade (Dammam) Rezayat (Al-Khobar) JAL International (Dammam) ARAMCO (Abqaiq) Automation (Al-Khobar) Rashid Mall (Al-Khobar Emaar (Dammam) Ofsat Arabia (Abqaiq) Mother Care (Al-Khobar) Mall Of Dhahran (Al-Khobar) AFI (Jubail) Al Waha Mall (Dammam) NPC (Dammam) AL-SHUWAYER (Dammam) King Khalid International Airport (Riyadh) King Fahd International Airport (Dammam)
County
Registration form
Projects successfully completed
Company Details
Postcode
Delivery Details address
County Postcode
Contact Details Name Mobile Tel.: Fax: Web E-Mail
Digital Technology Trading Est., Al-Kilaibi Tower 2nd Floor Room 203 P.O.Box 79310, Al-Khobar 31952, Kingdom of Saudi Arabia Tel.:+966-3-8990205, +966-3-8932712, Fax:+966-3-8978559 www.digitech.net.sa,
[email protected] Join our Social Networks
14
Tel.:+966-3-8990205, Fax: +966-3-8978559
www.digitech.net.sa,
[email protected]
www.facebook.com/digitecharabia
www.twitter.com/digitecharabia
www.youtube.com/digitecharabia
[email protected]
Tel.:+966-3-8990205, Fax: +966-3-8978559
www.digitech.net.sa,
[email protected]
Tel.:+966-3-8990205, Fax: +966-3-8978559 www.digitech.net.sa,
[email protected] Tel.:+966-3-8990205, Fax: +966-3-8978559 www.digitech.net.sa,
[email protected]
Kin g (D Fahd am ma Bin A mKh bdula ob ar ziz R Hw oa ay d )
Old location Of Edmark Al-Khobar
Gas Station
KIN G
Al Ramaniyah Mall
Alyssa Souk
Digital Technology Trading Est. Al-Kilaibi Tower 2nd Floor Room 203 P.O.Box 79310, Al-Khobar 31952 Kingdom of Saudi Arabia Tel.:+966-3-8990205 +966-3-8932712 Fax:+966-3-8978559 www.digitech.net.sa
[email protected]
Al Jawhara Commercial Center
Al Rammah Supermarket KIN G KH AL ED Everything ST . 10 Store Al-Kilaibi Tower Al Garawi Center
AL-KHOBAR CITY CENTER
DIGITECH Al-Khobar Location Map
Al Rajhi FA Bank HA D ST .
Alesayi
e qu os ad M ly Ro Ho aziz o l Tw bdu the in A f no hB dia dulla o t s b Cu ng A i K
Farm 9 Supermarket
AL SHAIKH TOWER
Head Office: DIGITECH Al-Khobar Al-Kilaibi Tower 2nd Floor Room 203 Side Entrance use the Elevator
Showroom
Al Salama Hospital
Music Master
Company Profile
Fiber Optic Solutions Networking Solutios Computers Solutions Electronics Solutions Software Solutions Website Solutions Digital Technology Trading Est. Al-Kilaibi Tower 2nd Floor Room 203 P.O.Box 79310, Al-Khobar 31952 Kingdom of Saudi Arabia Tel.:+966-3-8990205 +966-3-8932712 Fax:+966-3-8978559 www.digitech.net.sa
[email protected]
